Panasonic KX-TGDA99 User manual

Installation Manual
Additional Bluetooth Cordless Handset
Model No. KX-TGDA99
Thank you for purchasing a Panasonic product.
This unit is an additional handset compatible with the following series of
Panasonic Digital Cordless Phone:
– KX-TGD890/KX-TG3890
– KX-TGF890
(The corresponding models are subject to change without notice.)
You must register this handset with your base unit before it can be used. This
installation manual describes only the steps needed to register and begin using
the handset. Please read the base unit’s operating instructions for further details.
Please read this installation manual before using the unit and save it for future
reference.
For assistance, visit our Web site: http://shop.panasonic.com/support
for customers in the U.S.A.
Printed in Malaysia PNQX9209ZA PP0122YM0
KX-TGDA99_0110_ver001.pdf 1 10/1/2021 7:56:45 AM

Accessory information
Supplied accessories
Accessory item/Part number Quantity
Charger/PNLC1077ZS 1
Rechargeable batteries/HHR-4DPA 2
Handset cover/PNYNTGDA99SR*1 1
*1 The handset cover comes attached to the handset.
Note:
RPlease read the base unit’s operating instructions for additional/replacement
accessories.
RPlease read “Graphical symbols for use on equipment and their descriptions” of
the base unit’s operating instructions.
Bluetooth® devices
You can expand your phone system by pairing the Bluetooth headset to the
handset.
Your Bluetooth headset*1: 4 max.
*1 Your headset must be Bluetooth wireless technology compatible. For more
details and the list of compatible headset, please visit our Web site:
http://shop.panasonic.com/bluetooth-phone
Trademarks
RThe Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is
under license.
2For assistance, please visit http://shop.panasonic.com/support
Installation
KX-TGDA99_0110_ver001.pdf 2 10/1/2021 7:56:45 AM

For your safety
To prevent severe injury and loss of life/property, read this section carefully before
using the product to ensure proper and safe operation of your product.
WARNING
Power connection
RCompletely insert the AC adaptor/power plug into the power outlet. Failure to do
so may cause electric shock and/or excessive heat resulting in a fire.
RRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it
from the power outlet, then wiping with a dry cloth. Accumulated dust may cause
an insulation defect from moisture, etc. resulting in a fire.
RUnplug the product from power outlets if it emits smoke, an abnormal smell, or
makes an unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped emitting and contact us at
http://shop.panasonic.com/support
Installation
RTo prevent the risk of fire or electrical shock, do not expose the product to rain
or any type of moisture.
RDo not place or use this product near automatically controlled devices such as
automatic doors and fire alarms. Radio waves emitted from this product may
cause such devices to malfunction resulting in an accident.
RDo not place the handset on the base unit when battery cover is removed.
CAUTION
Installation and location
RThe AC adaptor is used as the main disconnect device. Ensure that the AC
outlet is installed near the product and is easily accessible.
RThe product is only use for mounting at heights £ 2 m.
Note:
RThis height is not guaranteed for product reliability.
RTo prevent serious injuries due to the product unexpectedly falling, the
product must be installed at a height of 1.5 m or lower.
For assistance, please visit http://shop.panasonic.com/support 3
Installation
KX-TGDA99_0110_ver001.pdf 3 10/1/2021 7:56:45 AM

Battery
RWe recommend using the supplied batteries or additional/replacement batteries
noted on page 2 for replacement battery information. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
RDo not mix old and new batteries.
RDo not open or mutilate the batteries. Released electrolyte from the batteries is
corrosive and may cause burns or injury to the eyes or skin. The electrolyte is
toxic and may be harmful if swallowed.
RExercise care when handling the batteries. Do not allow conductive materials
such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit
may cause the batteries and/or the conductive material to overheat and cause
burns.
RCharge the batteries provided with or identified for use with this product only, in
accordance with the instructions and limitations specified in this manual.
ROnly use a compatible base unit (or charger) to charge the batteries. Do not
tamper with the base unit (or charger). Failure to follow these instructions may
cause the batteries to swell or explode.
RAvoid the use in the following conditions:
– High or low extreme temperatures during use, storage or transportation.
– Replacement of a battery with an incorrect type that can defeat a safeguard.
– Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
– Extremely high temperature and/or extremely low air pressure that can result
in an explosion or the leakage of flammable liquid or gas.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how
to recycle this battery.
Important safety instructions
When using your product, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
2. Do not use the telephone to report a gas leak in the vicinity of the leak.
4For assistance, please visit http://shop.panasonic.com/support
Installation
KX-TGDA99_0110_ver001.pdf 4 10/1/2021 7:56:45 AM

3. Use only the power cord and batteries indicated in this manual. Do not dispose
of batteries in a fire. They may explode. Check with local codes for possible
special disposal instructions.
SAVE THESE INSTRUCTIONS
Other information
RThe applied nameplate is located at the bottom or rear of the product.
ROperating the product near electrical appliances may cause interference. Move
away from the electrical appliances.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions.
Routine care
RWipe the outer surface of the product with a soft moist cloth.
RDo not use benzine, thinner, or any abrasive powder.
Notice for product disposal, transfer, or return
RThis product can store your private/confidential information. To protect your
privacy/confidentiality, we recommend that you erase information such as
phonebook or caller list entries from the memory before you dispose of, transfer,
or return the product.
Specifications
RStandard:
Bluetooth wireless technology 4.2
– Hands Free Profile (HFP)
RFrequency range:
1.92 GHz to 1.93 GHz (DECT)
2.402 GHz to 2.48 GHz (Bluetooth)
RRF transmission power:
115 mW (max.)
RPower source:
120 V AC, 60 Hz
RPower consumption:
Standby: 0.1 W
Maximum: 1.8 W
ROperating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry)
For assistance, please visit http://shop.panasonic.com/support 5
Installation
KX-TGDA99_0110_ver001.pdf 5 10/1/2021 7:56:45 AM

Setting up
Connections/Wall mounting
Connect the AC adaptor to the power outlet.
Drive the screws (
1
) (not supplied) into the wall, if necessary.
2
27.2 mm (1 1/16 inches)
1
2
1
2
Note:
RThe AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
RMake sure that the wall and the fixing method are strong enough to support the
weight of the unit.
Battery installation/Battery charging
Important:
RUse the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted on page 2.
RUSE ONLY rechargeable Ni-MH batteries AAA (R03) size (
1
).
RDo NOT use alkaline/manganese/Ni-Cd batteries.
RConfirm correct polarities ( , ).
Charge for about 7 hours.
RConfirm “Charging” is displayed (
2
).
RWhen the batteries are fully charged, “Fully charged” is displayed.
1
4
23
1
2
6For assistance, please visit http://shop.panasonic.com/support
Installation
KX-TGDA99_0110_ver001.pdf 6 10/1/2021 7:56:45 AM

Note:
RIf the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends ( , ) and the charge contacts with a dry cloth and
charge again.
Removing the battery
12
Registering a handset to a base unit
1Base unit:
Press and hold MLOCATORN for about 5 seconds.
RIf all registered handsets start ringing, press MLOCATORN again to stop,
then repeat this step.
2Handset:
Place the handset on the base unit or charger, then wait until a long beep
sounds and is displayed.
Note:
RIf an error tone sounds, or if is displayed, register the handset according to
the base unit’s operating instructions.
Display language
1MMENUN#110
2MbN: Select the desired setting. a MSAVEN a MOFFN
Using a Bluetooth headset
By pairing a Bluetooth headset to the handset, you can enjoy hands-free
conversations when talking over a phone calls. For details about the operations,
refer to the base unit’s operating instructions.
Important:
RYour Bluetooth headset must support the Hands Free Profile (HFP) specification.
RUp to 4 Bluetooth headsets can be paired to the handset.
ROnly 1 Bluetooth headset can be used with the unit at a time.
For assistance, please visit http://shop.panasonic.com/support 7
Installation
KX-TGDA99_0110_ver001.pdf 7 10/1/2021 7:56:45 AM

RFor best performance, we recommend using your Bluetooth headset within 1 m
(3.3 feet) of the handset. The handset can communicate with Bluetooth
headsets within an approximately 10 m (33 feet) range.
Turning Bluetooth feature on/off
Once this feature is turned on, the Bluetooth MPAIRN button is enable to use and
the handset can perform other Bluetooth functions. The default setting is “Off”.
Important:
RWe recommend turning off the setting to save the battery life of your handset
when you are not using a Bluetooth headset.
1MMENUN#613
2MbN: Select the desired setting. a MSAVEN
3MOFFN
Pairing a Bluetooth headset to the handset
Important:
RMake sure that the Bluetooth headset is not connected to any other Bluetooth
device.
RRefer to the headset’s operating instructions. If your headset PIN is not “0000”,
change the Bluetooth PIN beforehand (page 10).
1Bluetooth headset:
Set your headset to pairing mode.
2Handset:
Press and hold MPAIRN for about 3 seconds.
3Wait until a long beep sounds.
RWhen the Bluetooth headset is ready for use, MN is displayed.*1
*1 Corresponding headset number is indicated next to the item.
Note:
RIn step 2, if the handset has been paired with a maximum of 4 headsets, you
can overwrite any unwanted headset by pressing MYESN a MbN: Select the
desired headset a MSELECTN.
Connecting/disconnecting a Bluetooth headset
To use your headset with another Bluetooth device, you may need to disconnect it
from the handset. If you want to use it again, reconnect the headset to the handset.
Important:
RMake sure that the headset is turned on.
8For assistance, please visit http://shop.panasonic.com/support
Installation
KX-TGDA99_0110_ver001.pdf 8 10/1/2021 7:56:45 AM

1To connect/disconnect:
Press MPAIRN a MbN: Select the desired headset a MSELECTN
2MbN: “Connect” or “Disconnect” a MSELECTN
RA long beep sounds.
3MOFFN
Note:
RA disconnected headset is not unpaired from the handset, so pairing it to the
handset again is unnecessary.
Unpairing a Bluetooth headset
You can cancel the pairing of the headset that is stored to the handset.
1Press MPAIRN a MbN: Select the desired headset. a MSELECTN
2MbN: “Unpair” a MSELECTN
3MbN: “Yes” a MSELECTN
RA long beep sounds.
4MOFFN
Changing the headset name
The name of the registered headset will be displayed while talking using a
Bluetooth headset or in the headset list. You can customize the name of registered
Bluetooth headsets.
1Press MPAIRN a MbN: Select the desired headset. a MSELECTN
2MbN: “Change name” a MSELECTN a Enter the desired name (16
characters max.).
3MSAVEN a MOFFN
Note:
RWhen the headset is unpaired, the headset name stored in the handset will be
deleted.
Connection after the call
You can set to remain or disconnect the Bluetooth headset connection after the call
has ended. The default setting is “Stay connected”.
1MMENUN#644
2MbN: Select the desired setting. a MSAVEN
3MOFFN
For assistance, please visit http://shop.panasonic.com/support 9
Installation
KX-TGDA99_0110_ver001.pdf 9 10/1/2021 7:56:45 AM

Changing the Bluetooth PIN (Personal Identification
Number)
The PIN is used to pair the headset to the handset. The default PIN is “0000”. If
your headset PIN is not “0000”, change the Bluetooth PIN beforehand.
Important:
RPlease make note of your new PIN. The unit does not reveal the PIN to you. If
you forget your PIN, please refer the base unit’s operating instruction to reset
the PIN.
1MMENUN#645
RIf the unit prompts you to enter the old PIN (When the default has been
changed), enter the current 4-digit PIN. a MOKN
2Enter the new 4-digit PIN. a MOKN
3Enter the new 4-digit PIN again. a MSAVEN a MOFFN
FCC and other information
This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section
68.316.
When you hold the phone to your ear, noise might be heard in your Hearing Aid.
Some Hearing Aids are not adequately shielded from external RF (radio frequency)
energy. If noise occurs, use an optional headset accessory or the speakerphone
option (if applicable) when using this phone. Consult with your audiologist or
Hearing Aid manufacturer about the availability of Hearing Aids which provide
adequate shielding to RF energy commonly emitted by digital devices.
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the dispatcher the reason for the call.
2) Perform such activities in the off-peak hours, such as early morning or late
evenings.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Privacy of communications may not be ensured when using this phone.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.
10 For assistance, please visit http://shop.panasonic.com/support
Installation
KX-TGDA99_0110_ver001.pdf 10 10/1/2021 7:56:45 AM

NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Warning:
RThis product complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
RThis handset may not be collocated or operated in conjunction with any other
antenna or transmitter.
RFor body-worn operation, the handset must be used only with a non-metallic
accessory. Use of other accessories may not ensure compliance with FCC RF
exposure requirements.
Notice:
RFCC ID can be found inside the battery compartment or on the bottom of the
unit.
Compliance with TIA-1083 standard
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephone handsets identified with this logo have reduced
noise and interference when used with T-Coil equipped
hearing aids and cochlear implants.
For assistance, please visit http://shop.panasonic.com/support 11
Installation
KX-TGDA99_0110_ver001.pdf 11 10/1/2021 7:56:45 AM

Notice:
LThis product is designed for use in the United States of America. Sale or use
of this product in other countries may violate local laws.
LCet appareil est conçu pour être utilisé aux États-Unis d’Amérique. La vente
ou l’emploi de cet appareil dans certains autres pays peut constituer une
infraction à la législation locale.
LEste producto está diseñado para usarse en los Estados Unidos de América.
La venta o el empleo de este producto en ciertos países puede constituir
violación de la legislación local.
Lҏ౰ࠢட࣏୽ٺҢՄ೩Ȅӵڏт୽ড়᎛୵ܖٺҢȂџ૖ོႂІ࿋ӴݲٽȄLߎߩ⵾ຠߪޔᣣᧄ࿖ᄖߢߩ૶↪ࠍ⋡⊛ߣߒߡ⸳⸘ߐࠇߡ߅ࠅޔᣣᧄ࿖ౝߢߩ૶↪ߪᴺᓞ㆑෻ߣߥࠅ߹ߔޕᓥߞߡޔᒰ␠ߢߪᣣᧄ࿖ౝߦ߅޿ߡߪේೣߣߒߡୃℂߥߤߩࠨ࡯ࡆࠬߪ⥌ߒ߆ߨ߹ߔޕ
12 For assistance, please visit http://shop.panasonic.com/support
Installation
KX-TGDA99_0110_ver001.pdf 12 10/1/2021 7:56:45 AM

Customer services
Accessories!
hp://shop.panasonic.com/support
Customer Services Directory
Shop
for all your Panasonic gear
Go to
Get everything you need to get the most out of
your Panasonic products
Accessories & Parts for your Camera, Phone, A/V
products, TV, Computers & Networking, Personal
Care, Home Appliances, Headphones, Baeries,
Backup Chargers & more…
For Product Informa!on, Opera!ng Assistance,
Parts, Owner’s Manuals, Dealer and Service info
go to hp://shop.panasonic.com/support
For the hearing or speech impaired TTY: 1- 877-833-8855
As of June 2015
For assistance, please visit http://shop.panasonic.com/support 13
Appendix
KX-TGDA99_0110_ver001.pdf 13 10/1/2021 7:56:45 AM

Limited Warranty (ONLY FOR U.S.A.)
Limited Warranty Coverage (For USA Only)
Labor
One (1) Year
Parts
One (1) Year
To submit a new repair request and for quick repair status visit our Web Site at
http://shop.panasonic.com/support
Panasonic Products Limited Warranty
Online Repair Request
Mail-In Service--Online Repair Request
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length
of the period indicated on the chart below, which starts with the date of original purchase
(“warranty period”), at its option either (a) repair your product with new or refurbished parts,
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your
purchase price. The decision to repair, replace or refund will be made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. This Limited Warranty excludes both
parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet).
This warranty only applies to products purchased and serviced in the United States.
This warranty is extended only to the original purchaser of a new product which was
not sold “as is”.
Telephone
When shipping the unit, carefully pack, include all supplied accessories listed in the
Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box.
When shipping Lithium Ion batteries please visit our Web Site at
http://shop.panasonic.com/support as Panasonic is committed to providing the most up to
date information. Include a letter detailing the complaint, a return address and provide a
daytime phone number where you can be reached. A valid registered receipt is required
under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL
BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING
DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL
BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF
OF PURCHASE.
Product or Part Name
14 For assistance, please visit http://shop.panasonic.com/support
Appendix
KX-TGDA99_0110_ver001.pdf 14 10/1/2021 7:56:45 AM

Limited Warranty Limits and Exclusions
(As examples, this excludes damages for lost time, travel to and from the servicer,
loss of or damage to media or images, data or other memory or recorded content.
The items listed are not exclusive, but for illustration only.)
This warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which
are caused by products not supplied by the warrantor, or failures which result from
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business
or rental use of the product, or service by anyone other than a Factory Service Center
or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT
OF ANY BREACH OF THIS WARRANTY.
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state. If a problem with this product develops during or after the warranty period,
you may contact your dealer or Service Center. If the problem is not handled to your
satisfaction, then write to:
Panasonic Corporation of North America
Consumer Affairs Department 8th FI.
Two Riverfront Plaza
Newark NJ 07102-5490
As of January 2020
For assistance, please visit http://shop.panasonic.com/support 15
Appendix
KX-TGDA99_0110_ver001.pdf 15 10/1/2021 7:56:45 AM

1Reconnect AC adaptor to the base unit.
2Check if telephone line cord is connected.
3Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4Read troubleshooting page in the base unit’s
Operating Instructions.
IMPORTANT!
If your product is not working properly. . .
Visit our Web site: http://shop.panasonic.com/support
LFAQ and troubleshooting hints are available.
Two Riverfront Plaza, Newark, NJ 07102-5490
© Panasonic Corporation 2022
16 For assistance, please visit http://shop.panasonic.com/support
Appendix
KX-TGDA99_0110_ver001.pdf 16 10/1/2021 7:56:45 AM