Panasonic TGP 550 User manual

1
The Panasonic TGP550 and additional cordless handsets (TPA50) can
be assigned to a single HPBX user or multiple HPBX users. By default,
the TGP550 and associated cordless handsets will be assigned to a
single user; all the handsets will ring when an incoming call goes to
the user’s extension:
Alternatively, you can assign a single user to each handset:
primus.ca
Customer Configuration:
Panasonic TGP550/TPA50
Handset User Assignment Guide

primus.ca 2
ou can also do a combination – some users can have two or
more handsets assigned to them, while other users will just have
a single handset.
The assignment of handsets to HPBX users is configured through
the HPBX Online Portal.
ASSIGNING USERS TO HANDSETS
1. Login to the HPBX Online Portal (https://voice.primus.ca/HPBX/)
using your administrator username (usually your email) and password.
2. Choose Advanced View in the drop-down menu in the top right corner.

primus.ca 3
3. Click Admin Se ings in the left-hand side menu and click
Button Assignment.
4. Under Configure Panasonic device, choose your Panasonic
TGP550 device.
5. Assign a unique user to each “line” in the table.
Please No e:
1. Lines represent the maximum number of users that the
Panasonic device can accommodate and does not correspond
to the number of call paths supported by the device.
2. ou cannot assign multiple lines to a single user. Lines can be
left unassigned if you have fewer users than lines – it will have
no impact on the functionality of your service.

primus.ca 4
6. Assign any number of handsets to each user by using the
checkboxes. ou can assign a corded handset base unit to a user
or a cordless handset or multiple handsets. Most users will want
to dedicate a handset to only one user.
Please No e:
Please Note: The Panasonic TGP550 can support up to 6 cordless
handsets. If you have fewer than 6 cordless handsets, you can
leave the extra handsets unassigned (e.g. if you have only one
cordless handset, you can leave Handset 2 to 6 unassigned).
7. Click Save.