Panasonic KX-TGA641E User manual

Installation Manual
Additional Digital Cordless Handset
Model No. KX-TGA641E
Thank you for purchasing a Panasonic product.
Please read this installation manual before using the unit and
save it for future reference.
This unit is an additional handset compatible with the
following series of Panasonic Digital Cordless Phone:
KX-TG6411/KX-TG6421/KX-TG6461
You must register this handset with your base unit before it
can be used. This installation manual describes only the
steps needed to register and begin using the handset. Please
read the base unit’s operating instructions for further details.
Charge the batteries for about 7 hours before initial use.
TGA641E(e).fm Page 1 Monday, December 15, 2008 6:24 PM

2 Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Accessory information
Supplied accessories
*1 PNLC1008ZT: Titanium black
PNLC1008YS: Silver
*2 Please read the base unit’s operating instructions for replacement
battery information.
*3 The handset cover comes attached to the handset.
Note:
LPlease read the base unit’s operating instructions for additional/
replacement accessories.
LThis equipment is designed for use in the U.K. and Republic of Ireland.
LIn the event of problems, you should contact your equipment supplier
in the first instance.
Sales and support information
Customer Care Centre
LFor customers within the U.K.: 0844 844 3898
LFor customers within the Republic of Ireland: 01289 8333
LVisit our website for product information:
www.panasonic.co.uk
LE-mail: [e-mail]
Accessory item/Part number Quantity
Charger*1 1
AC adaptor/PQLV219E0Y or PQLV219E0X 1
Rechargeable batteries*2/
HHR-55AAAB or N4DHYYY00005
2
Handset cover*3 1
TGA641E(e).fm Page 2 Monday, December 15, 2008 6:24 PM

3 Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Direct Sales at Panasonic U.K.
LOrder accessory and consumable items for your product with ease and
confidence by phoning our Customer Care Centre Monday - Thursday
9:00am - 5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays).
LOr go on line through our Internet Accessory ordering application at
www.panasonic.co.uk
LMost major credit and debit cards accepted.
LAll enquiries transactions and distribution facilities are provided
directly by Panasonic U.K. Ltd.
LIt couldn’t be simpler!
LAlso available through our Internet is direct shopping for a wide range
of finished products, take a browse on our website for further details.
Setting up
Connection/Wall mounting
Note:
LUse only the supplied Panasonic AC adaptor PQLV219E.
LThe AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
(220-240 V AC,
50 Hz)
25 mm
Screws
(Not supplied)
Hooks
TGA641E(e).fm Page 3 Monday, December 15, 2008 6:24 PM

4 Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Battery installation/Battery charge
Important:
LUse the supplied rechargeable batteries. For replacement, we
recommend using the Panasonic rechargeable batteries noted in the
base unit’s operating instructions.
LWipe the battery ends (S, T) with a dry cloth.
LAvoid touching the battery ends (S, T) or the unit contacts.
LConfirm correct polarities (S, T).
LUSE ONLY Ni-MH batteries AAA (R03) size.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
Charge for about 7 hours.
LWhen the batteries are fully charged, the charge indicator goes off.
Note:
LWhen the language selection is displayed after installing the batteries
for the first time, you can select your desired language.
{V} / {^} : Select your desired language. i M i {ih}
LThe handset display may show “Please wait for 1 minute.”
when the handset is placed on the charger if it is not registered to the
base unit.
LIf the batteries are fully charged, but the operating time seems to be
shorter, clean the battery ends (S, T) and the charge contacts with a
dry cloth and charge again.
Rechargeable Ni-MH
ONLY
Confirm “Charging”
is displayed.
TGA641E(e).fm Page 4 Monday, December 15, 2008 6:24 PM

5 Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold
{ih} for few seconds to turn the handset on.
1Handset:
Lift the handset and press {ih}.
2Base unit:
Proceed with the operation for your model.
3Handset:
Place the handset on the base unit.
LContinue the operation even when the handset display shows
“ Please wait for 1 minute. ” .
4With the handset still on the base unit, wait until a confirmation tone
sounds and wstops flashing.
Note:
LIf an error tone sounds, or if wis still flashing, register the handset
according to the base unit’s operating instructions.
LThe KX-TG6411 does not feature an answering system.
LAnswering system features are available only when this handset is
registered to the KX-TG6421/KX-TG6461.
NKX-TG6411
Press and hold {x} for about 5 seconds. (No registration tone)
NKX-TG6421/KX-TG6461
Press and hold {x} for about 5 seconds, until the registration tone
sounds.
LIf all registered handsets start ringing, press the same button to
stop. Then repeat this step.
TGA641E(e).fm Page 5 Monday, December 15, 2008 6:24 PM