Panasonic EP30007KX User manual

34
Using the stretch massage
Warning
Make sure there are no people or pets behind the unit when the arm stretch function is turned“on.”
Failure to observe this precaution may result in accident or injury.
•
Caution
Do not use with any pre-existing condition of shoulder injury.
Doing so may result in injury.
•
When Pre-Program and Quick Massage are selected, the leg stretch is turned on and the arm stretch is turned off, respectively.
When Self-Program and Manual Operation are selected, the stretch massage for all parts is turned off.
1Open the left cover.
2Press the or buttons to turn the functions off or on.
Display
To execute the stretch massage only
After turning on the power by pressing the button,
press the (stretch legs) or (stretch
arm) buttons.
The power will turn off automatically if no operation is
executed for 3 minutes.
•
The display will indicate if the stretch function is turned
on or off.
(The lamp is turned on: [ON], the lamp is turned off: [OFF])
Arm stretch
Leg stretch
Operations of the leg stretch
1. After grasping the legs with air, the
legs are stretched as the legrest is
lowered approximately 10 degrees
from the massage position.
2. Once the legrest returns to the original
angle, the legrest is then lowered
approximately 30 degrees to stretch
the legs further.
3.When the operation is complete, the
legrest will return to the angle at the
time before the operation.
Lowered by
approximately
10 degrees
Lowered by
approximately
30 degrees
Operations of the arm stretch
1.The backrest will come fully up.
One arm will inflate to firmly secure
the arm/hand in place.
2. After the backrest reclines
approximately 20 degrees to stretch
the arm, the backrest will come back
up 5 degrees.
3.
Then, the backrest will recline approximately
10 degrees to stretch the shoulders and
arms further.When the operation is
complete, the backrest will return to the
angle at the time before the operation.
•
•

35
Ottoman and Backrest height adjustment
Adjusting the reclining angle and the angle of the legrest
1Press the button to turn on the power.
2Press the or button to adjust the angle.
Movement will continue until a “beep-beep-beep”sound is heard if the buttons are held down.
The legrest will start to move shortly after the backrest.
Approx. 85˚
Approx. 120˚
Approx.
170˚
If the backrest reclines to an angle where you
cannot touch the buttons on the control panel from
the seat, hold the control panel in your hand.
Approx. 0˚
•
•

36
Extending out the legrest
1Slide the legrest to your favorite position by pulling the legrest slide lever.
(The legrest will slide approximately 5" (12 cm).)
Pull the legrest slide
lever back.
Push with soles of feet and
the legrest slides out.
Raise legs slightly and legrest returns.
2Release the legrest slide lever when it reaches your favorite position.
Legrest slide lever

37
Adjusting the voice guidance volume
Press the button to adjust the volume.
VolumeDisplay
“Off” “Soft” “Medium”
Default Setting “Loud”
The single beep (when a
button is pressed) and the
triple beep (when the
adjustable setting limit is
reached) will always be
audible.
Press the button to shift
the volume level by one
up/down.

38
Adjusting the control panel stand and pillow
Adjusting the control panel stand
The direction of the pivoting stand can be adjusted.
Front/Back
Left/Right
Ball joint
Adjusting the pillow for correct height during a massage
1. Remove the pillow. 2. Adjust the height of the pillow so that the
bottom edge is at ear level. 3. Attach the pillow on the velcro
fasteners.
Pillow
If positioned too low, the pillow may
interfere with a massage of the area
around the neck.
Lower edge
of the pillow
Ear level
When the reclining angle changes, the
position of the pillow may shift. In that
case, adjust the position again.
•
•
Pillow
Velcro
fasteners

39
Advanced user memory function
The user memory function retains the adjustments for a massage, such as “REPEAT” function or “BACK INTENSITY,” so that the
massage will start with the saved settings.
Saving the user program settings
See page 40 for the settings that can be saved.
After completing the massage, or when the massage is stopped by pressing the , the
buttons will flash and the unit ready to save any settings that changed during the
massage.
1Press the button for the program settings that you want to save while the
buttons flash (for approximately 15 seconds).
The program settings have been saved when the button you pressed and the user memory display turn on.
When the selected button starts flashing quickly
Other settings are already saved.
To update with new program settings, press the same button again.
To maintain the saved programs, press a different button.
The operation must be executed within approximately 15 seconds after the button starts flashing quickly.
When you want to use your saved massage settings
1Press the button to turn on the power.
The power will turn off automatically if no operation is executed for 3 minutes without performing massage.
2Press the button used to save your settings.
The user memory display turns on.
3Select from Pre-Program, Quick Massage, Self-Program, or Manual Operation.
Massage starts without pressing the button.
It is also possible to change the settings. In that case, press button after the settings are changed.
4The massage will start after body scanning is completed.
•
•
•
•
•
•

40
Settings that can be saved
The latest settings entered by the user during programs or manual operation will be saved.
For Pre-Program, Quick Massage, and Self-Program
Settings other than the massage style will be saved as common settings.
Ultra Knead/Repeat/Position
Settings for 8 different times for the respective programs
can be saved.
If the number of saved settings exceeds 8, the oldest one
will be deleted.
See pages 27 to 28 for detailed functions.
•
•
•
Style
The massage style that is selected last will be saved.
Settings for an entire program will be saved.
See pages 27 and 29 for detailed functions.
•
•
•
Leg stretch settings
Air massage settings
Self-program levels
Intensity of massage heads
For Manual Operation
Leg stretch settings
Air massage settings
Massage style
Massage head position Speed, tapping, regional rolling, auto width
Massage action
settings
Note: The following will not be saved:
Reclining angle
Length of ottoman extension
Arm stretch settings
Manual operation settings
* Massage intensity
•
•
•
•
•

41
Erasing saved data
1Press the button to turn on the power.
The power will turn off automatically if the massage does not start within 3 minutes after turning on the power.
2Press the button corresponding to the settings you wish to delete.
Only the button pressed will illuminate.
3Confirm the program selection buttons flash.
4Press the same button again and hold for 3 or more seconds.
The pressed button will flash.
5Press the button once again while it is flashing (for approximately 15 seconds).
The change from flashing to steady indicates that the deletion is complete.
•

42
After completing the massage
The massage will be completed in approximately 15 minutes. For a quick massage, 5 minutes.
Since the foot section pivots, the legrest will return to a down and retracted position so that you can safely sit up. To return the
back of the chair to the original position, press the button twice. The chair does not automatically come up since you
may be resting comfortably.
Interrupting the massage
1Return the legrest to the original position and then press the button.
The massage heads move to the retracted position.
The legrest lowers and the backrest rises automatically.The backrest will move after the massage heads retract.
Pull the legrest
slide lever back. Raise the legs
slightly and the
legrest returns.
When the massage is complete
The buttons will flash and the unit ready to save any settings that changed during the massage.
Not saving the settings
It is not necessary to operate.The operation will complete after approx. 15 seconds.
Saving the settings
See pages 39 to 41 “Advanced user memory function.”
Emergency Stop
1Press the button.
All operations will stop immediately.
The user program will not be saved in this case.
Get off the unit carefully to prevent the unit tipping over.
•
•
•
•
•

43
Disconnecting the power
Warning
After use, always slide the power switch to the“off” position, turn the lock switch to the“lock”position and remove
the lock switch key.
Failure to observe this precaution may result in accident or injury due to children playing with the controls.
•
Caution
Always hold the power plug, not the power cord, when unplugging from an outlet.
Failure to observe this precaution may result in electric shock or short-circuit.
Unplug the power plug from the outlet when the unit is not in use.
Failure to observe this precaution may result in electrical fire due to deterioration of insulation caused by dust and moisture.
Keep the lock switch key out of reach of children.
Failure to observe this precaution may result in accident or injury due to accidental ingestion or children playing with the
controls.
•
•
•
1Slide the power switch to the“off”
position. 2Turn the lock switch key to the “lock” position.
Power supply box
3Remove the power plug from the
electrical outlet. 4The lock switch key must be stored out of the reach of children.