Panasonic KX-TDA15 User manual

Thank you for purchasing the Panasonic Hybrid IP-PBX, KX-TDA15.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDA15: Version 1.1
Model No. KX-TDA15
Hybrid IP-PBX
Installation Manual
SD Logo is
a trademark.

2 Installation Manual
System Components
Available Proprietary Telephones
The Hybrid IP-PBX supports all of the Panasonic KX-T7000, KX-TD7000, and KX-TCA series:
• Digital/Analogue proprietary telephones (e.g., KX-T7625, KX-T7630, KX-T7633, KX-
T7636)
• Portable stations (e.g., KX-TD7580, KX-TD7590, KX-TCA155, KX-TCA255)
• DSS consoles (e.g., KX-T7640)
• Single line telephones (e.g., KX-T7710)
Note
The Hybrid IP-PBX does not support the following telephones:
• KX-T30800 series Proprietary Telephones and DSS consoles
• KX-T61600 series Proprietary Telephones and DSS consoles
• KX-T123200 series Proprietary Telephones and DSS consoles
• KX-TD7500 DECT Portable Station
System Components Table
Model Description
Main Unit KX-TDA15 Main Unit
Trunk Cards KX-TDA3183 2-Port Analogue Trunk Card (LCOT2)
KX-TDA3280 2-Port BRI Card (BRI2)
KX-TDA3283 1-Port BRI Card (BRI1)
KX-TDA3480 4-Channel VoIP Gateway Card (IP-GW4)
Extension Cards KX-TDA3172 8-Port Digital Extension Card (DLC8)
KX-TDA3174 8-Port Single Line Telephone Extension Card (SLC8)
Other Cards KX-TDA3161 4-Port Doorphone Card (DPH4)
KX-TDA3162 2-Port Doorphone Card (German Type) (DPH2)
KX-TDA3166 8-Channel Echo Canceller Card (ECHO8)
KX-TDA3168 Extension Caller ID Card (EXT-CID)
KX-TDA3191 2-Channel Message Card (MSG2)
Cell Stations (CSs) KX-TDA0141CE 2-Channel Cell Station Unit Using a Super Hybrid Port or
a DLC Card for DECT Portable Station
Proprietary Equipment KX-T30865 Doorphone

Installation Manual 3
For the equipment (e.g., Add-on Key Module, USB Module, Headset*1) that can be connected
to a particular telephone, refer to the telephone's manual.
For other equipment that can be connected to the Hybrid IP-PBX, refer to "1.2.2 System
Connection Diagram".
Abbreviations in this manual
Proprietary telephone: PT
Digital proprietary telephone: DPT
Analogue proprietary telephone: APT
Portable station: PS
Single line telephone: SLT
Notice
• There are some optional service cards and features that are not available for certain
countries/areas. Consult your certified Panasonic dealer for detailed instructions.
• The power supply capacity of the Hybrid IP-PBX may differ from the values described
in this manual depending on the model number. Please consult your dealer for
detailed information.
*1 The KX-T7090 headset can be connected to the KX-T7000, KX-T7200, KX-T7300, KX-T7400, and KX-T7500 (except for KX-
T7560/KX-T7565) series telephones.

4 Installation Manual
Important Safety Instructions
SAFETY REQUIREMENTS
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool.
5. Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to
protect it from overheating, these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other similar
surface. This product should never be placed near or over a radiator or other heat source.
This product should not be placed in a built-in installation unless proper ventilation is
provided.
7. This product should be operated only from the type of power source indicated on the
product label. If you are not sure of the type of power supply to your home, consult your
dealer or local power company.
8. This product is equipped with a 3-wire earthing type plug, a plug having a third (earthing)
pin. This plug will only fit into an earthing type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the earthing type plug.
9. Do not allow anything to rest on the power cord. Do not locate this product where the cord
will be abused by people walking on it.
10. Do not overload wall outlets and extension cords as this can result in the risk of fire or
electric shock.
11. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the product.
12. To reduce the risk of electric shock, do not disassemble this product, but take it to a
qualified person when some service or repair work is required. Opening or removing
covers may expose you to dangerous voltages or other risks. Incorrect reassembly can
cause electric shock when the appliance is subsequently used.
13. Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power supply cord or plug is damaged or frayed.
b) If liquid has been spilled into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions because improper
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation.
e) If the product has been dropped or the cabinet has been damaged.

Installation Manual 5
f) If the product exhibits a distinct change in performance.
14. Avoid using a telephone (other than a cordless type) during an electrical storm. There may
be a remote risk of electric shock from lightning.
15. Do not use the telephone to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS

6 Installation Manual
Precaution
• Keep the unit away from heating appliances and electrical noise generating devices such
as fluorescent lamps, motors and televisions. These noise sources can interfere with the
performance of the Hybrid IP-PBX.
• This unit should be kept free of dust, moisture, high temperature (more than 40 °C) and
vibration, and should not be exposed to direct sunlight.
• Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.
• If there is any trouble, disconnect the unit from the telephone line. Plug an SLT into the
telephone line. If the telephone operates properly, do not reconnect the unit to the line until
the trouble has been repaired by an authorised Panasonic Factory Service Centre. If the
telephone does not operate properly, chances are that the trouble is in the telephone
network, and not in the Hybrid IP-PBX.
• Do not use benzene, thinner, or the like, or any abrasive powder to clean the cabinet. Wipe
it with a soft cloth.
For users in Germany only
• When the unit is working, the noise is less than 70 dB (A) according to DIN 45635 Part 19.
WARNING
• THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED
SERVICE PERSONNEL.
• WHEN A FAILURE OCCURS WHICH EXPOSES ANY INTERNAL PARTS,
DISCONNECT THE POWER SUPPLY CORD IMMEDIATELY AND RETURN
THIS UNIT TO YOUR DEALER.
• DISCONNECT THE TELECOM CONNECTION BEFORE
DISCONNECTING THE POWER CONNECTION PRIOR TO RELOCATING
THE EQUIPMENT, AND RECONNECT THE POWER FIRST.
• THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR
SAFETY REASONS THIS PLUG MUST ONLY BE CONNECTED TO AN
EARTHING CONTACT SOCKET WHICH HAS BEEN INSTALLED
ACCORDING TO REGULATIONS.
• TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
• THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT
DEVICE. ENSURE THAT THE SOCKET-OUTLET IS LOCATED/
INSTALLED NEAR THE EQUIPMENT AND IS EASILY ACCESSIBLE.
CAUTION
DANGER OF EXPLOSION EXISTS IF THE BATTERY IS INCORRECTLY REPLACED.
REPLACE THE BATTERY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED
BY THE BATTERY MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING
TO THE MANUFACTURER’S INSTRUCTIONS.

Installation Manual 7
MODEL No.:
SERIAL No.:
The serial number of this product may be found on the label affixed to the
side of the unit. You should note the model number and the serial number
of this unit in the space provided and retain this book as a permanent
record of your purchase to aid in identification in the event of theft.
DATE OF PURCHASE
NAME OF DEALER
DEALER'S ADDRESS
DEALER'S TEL. NO.
For your future reference
The KX-TDA15E, the KX-TDA15NE, and the KX-TDA15GR are designed to interwork
with the:
• Analogue Public Switched Telephone Network (PSTN) of a European country
• Pan-European Integrated Services Digital Network (ISDN) using ISDN basic rate access
We, Panasonic Communications Co., Ltd./Panasonic Communications Company (U.K.) Ltd., declare
that this equipment is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
If you would like to receive a copy of the original Declaration of Conformity of our products which
relates to the R&TTE, please visit our web address:
http://doc.panasonic.de

8 Installation Manual
Introduction
This Installation Manual is designed to serve as an overall technical reference for the
Panasonic Hybrid IP-PBX, KX-TDA15. It provides instructions for installing the hardware, and
programming the Hybrid IP-PBX using the KX-TDA15 Maintenance Console.
The Structure of this Manual
This manual contains the following sections:
Section 1 System Outline
Provides general information on the KX-TDA15, including the system capacity and
specifications.
Section 2 Installation
Describes the procedures to install the KX-TDA15. Detailed instructions for planning the
installation site, installing the optional service cards, and cabling of peripheral equipment
are provided. Further information on system expansion and peripheral equipment
installation is included.
Section 3 Guide for the KX-TDA15 Maintenance Console
Explains the installation procedure, structure, and basic information of the KX-TDA15
Maintenance Console.
Section 4 Troubleshooting
Provides information on the KX-TDA15 and telephone troubleshooting.
About the Other Manuals
Along with this Installation Manual, the following manuals are available:
Feature Guide
Describes all basic, optional and programmable features of the Hybrid IP-PBX, and step-
by-step instruction for performing system programming using a proprietary telephone or a
personal computer (PC).
User Manual
Provides operating instructions for end users using a PT, SLT, PS, or DSS Console.
Trademarks
•Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
•Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.
•All other trademarks identified herein are the property of their respective owners.
•Screen shots reprinted with permission from Microsoft Corporation.

Installation Manual 9
Precautions for Users in the United Kingdom
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and
convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced, please
ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI
to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is
replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is
obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR
PREMISES, THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE
CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET.
If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt,
please consult a qualified electrician.
WARNING
THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains leads are coloured in accordance with the following
code:
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows.
The wire that is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug
that is marked with the letter E or by the safety earth symbol or coloured GREEN or
GREEN-AND-YELLOW.
The wire that is coloured BLUE must be connected to the terminal that is marked with the letter
N or coloured BLACK.
The wire that is coloured BROWN must be connected to the terminal that is marked with the
letter L or coloured RED.

10 Installation Manual
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse
and fuse cover.
This equipment should be used on PSTN lines requiring 2-wire Loop calling unguarded
clearing with Loop Disconnect or DTMF address signalling.
The equipment must be connected to direct exchange lines and a payphone should not be
connected as an extension.
999 and 112 can be dialled on the apparatus after accessing the Exchange line for the purpose
of making outgoing calls to the BT emergency (999) and (112) service.
During dialling, this apparatus may tinkle the bells of other telephones using the same line. This
is not a fault and we advise you not to call the Fault Repair Service.

Installation Manual 11
Table of Contents
1 System Outline.............................................................................. 13
1.1 System Highlights..................................................................................................14
1.1.1 System Highlights ....................................................................................................14
1.2 Basic System Construction ..................................................................................16
1.2.1 Main Unit..................................................................................................................16
1.2.2 System Connection Diagram ...................................................................................17
1.3 Options ...................................................................................................................19
1.3.1 Options.....................................................................................................................19
1.4 Specifications.........................................................................................................20
1.4.1 General Description .................................................................................................20
1.4.2 Characteristics .........................................................................................................22
1.4.3 System Capacity ......................................................................................................23
2 Installation ..................................................................................... 25
2.1 Before Installation..................................................................................................26
2.1.1 Before Installation ....................................................................................................26
2.2 Installation of the Hybrid IP-PBX..........................................................................28
2.2.1 Unpacking ................................................................................................................28
2.2.2 Names and Locations ..............................................................................................29
2.2.3 Opening/Closing the Covers ....................................................................................30
2.2.4 Installation of the SD Memory Card .........................................................................33
2.2.5 Frame Earth Connection..........................................................................................34
2.2.6 Installing/Removing the Optional Service Cards......................................................35
2.2.7 Types of Connectors ................................................................................................44
2.2.8 Wall Mounting (KX-TDA15) ......................................................................................45
2.2.9 Wall Mounting (AC Adaptor) ....................................................................................48
2.2.10 Lightning Protector Installation.................................................................................51
2.3 Installation of the Trunk Cards .............................................................................54
2.3.1 LCOT2 Card.............................................................................................................54
2.3.2 BRI2 Card ................................................................................................................55
2.3.3 BRI1 Card ................................................................................................................58
2.3.4 IP-GW4 Card ...........................................................................................................61
2.4 Installation of the Extension Cards......................................................................63
2.4.1 DLC8 Card ...............................................................................................................63
2.4.2 SLC8 Card ...............................................................................................................64
2.5 Installation of the Other Cards .............................................................................65
2.5.1 DPH4 Card...............................................................................................................65
2.5.2 DPH2 Card...............................................................................................................67
2.5.3 ECHO8 Card............................................................................................................70
2.5.4 MSG2 Card ..............................................................................................................71
2.5.5 EXT-CID Card ..........................................................................................................72
2.6 Connection of Extensions.....................................................................................73
2.6.1 Maximum Cabling Distances of the Extension Wiring (Twisted Cable)....................73
2.6.2 Parallel Connection of the Extensions .....................................................................74
2.6.3 Digital EXtra Device Port (Digital XDP) Connection.................................................76
2.6.4 First Party Call Control CTI Connection...................................................................81
2.7 Connection of DECT Portable Stations................................................................82

12 Installation Manual
2.7.1 Overview ................................................................................................................. 82
2.7.2 Procedure Overview................................................................................................ 84
2.7.3 Site Planning ........................................................................................................... 86
2.7.4 Before Site Survey .................................................................................................. 90
2.7.5 Site Survey Using the KX-TCA255/KX-TD7590...................................................... 94
2.7.6 After Site Survey ..................................................................................................... 98
2.7.7 Connecting a Cell Station to the Hybrid IP-PBX ..................................................... 99
2.7.8 Wall Mounting........................................................................................................ 106
2.8 Connection of Doorphones and Door Openers................................................ 108
2.8.1 Connection of Doorphones and Door Openers..................................................... 108
2.9 Connection of Peripherals.................................................................................. 117
2.9.1 Connection of Peripherals ..................................................................................... 117
2.10 Starting the Hybrid IP-PBX ................................................................................. 121
2.10.1 Starting the Hybrid IP-PBX.................................................................................... 121
3 Guide for the KX-TDA15 Maintenance Console........................125
3.1 Overview .............................................................................................................. 126
3.1.1 Overview ............................................................................................................... 126
3.2 Connection........................................................................................................... 127
3.2.1 Connection ............................................................................................................ 127
3.3 Installation of the KX-TDA15 Maintenance Console ........................................ 129
3.3.1 Installing and Starting the KX-TDA15 Maintenance Console................................ 129
3.3.2 Structure of the KX-TDA15 Maintenance Console................................................ 133
3.3.3 Hybrid IP-PBX Configuration................................................................................. 134
3.3.4 Hybrid IP-PBX Maintenance ................................................................................. 135
4 Troubleshooting ..........................................................................137
4.1 Troubleshooting .................................................................................................. 138
4.1.1 Installation ............................................................................................................. 138
4.1.2 Connection ............................................................................................................ 139
4.1.3 Operation............................................................................................................... 141
4.1.4 Using the Reset Button ......................................................................................... 142
4.1.5 Troubleshooting by Error Log ................................................................................ 144
Index ...................................................................................................153

Installation Manual 13
Section 1
System Outline
This section provides general information on the Hybrid
IP-PBX, including the system capacity and
specifications.

1.1 System Highlights
14 Installation Manual
1.1 System Highlights
1.1.1 System Highlights
Networking Features
This Hybrid IP-PBX supports the following networking features:
Virtual Private Network (VPN)
VPN is a service provided by the telephone company. It uses an existing line as if it were
a private line.
Voice over Internet Protocol (VoIP) Network
The PBX can connect to another PBX via a private IP network. In this case, voice signals
are converted into IP packets and sent through this network.
Built-in Small Call Centre Features
An incoming call distribution group can be used as a small call centre with the following
features:
Queuing Feature
When a preprogrammed number of extensions in an incoming call distribution group are
busy, additional incoming calls can wait in a queue. While calls are waiting in the queue,
the calls are handled by the Queuing Time Table, which can be assigned for each time
mode (day/lunch/break/night).
Log-in/Log-out
Incoming call distribution group members can join (Log-in) or leave (Log-out) the groups
manually. While logged-in, a member extension can have a preprogrammed time period
automatically for refusing calls after completing the last call (Wrap-up).
VIP Call
It is possible to assign a priority to incoming call distribution groups. If an extension
belongs to multiple groups and the extension becomes idle, queuing calls in the groups
will be distributed to the extension in priority order.
Computer Telephony Integration (CTI) Features
Connecting a personal computer (PC) to this Hybrid IP-PBX (via a DPT, or via a Server PC on
a LAN) enables extension users to make use of advanced features by using the stored data in
the PC or in the Server PC.
Voice Mail Features
This Hybrid IP-PBX supports Voice Processing Systems (VPS) with DTMF Integration as well
as DPT (Digital) Integration.

1.1 System Highlights
Installation Manual 15
Parallelled Telephone Features
By connecting telephones in parallel, you can increase the number of telephones connected
to the PBX without adding additional extension cards.
Parallel Mode
An SLT can be connected to an APT or DPT which is connected to a Super Hybrid Port of
the PBX. The SLT shares the same extension number with the APT or DPT.
EXtra Device Port (XDP) Mode
An SLT can be connected to a DPT which is connected to a Super Hybrid Port of the PBX.
Unlike parallel mode, XDP mode allows each telephone to act as an independent
extension with its own extension number.
Digital XDP
A DPT can be connected to another DPT which is connected to a Super Hybrid Port of the
PBX. Similar to XDP mode, each DPT acts as an independent extension with its own
extension number.
Portable Station (PS) Features
PSs (e.g., KX-TCA255) can be connected to this Hybrid IP-PBX. It is possible to use the Hybrid
IP-PBX features using the PS like a PT. A PS can also be used in parallel with a wired
telephone (Wireless XDP Parallel Mode). In this case, the wired telephone is the main
telephone and the PS is the sub telephone.
PC Phone/PC Console Features
This Hybrid IP-PBX supports PC Phone and PC Console. These Panasonic CTI applications
provide advanced features.

1.2 Basic System Construction
16 Installation Manual
1.2 Basic System Construction
1.2.1 Main Unit
The main unit is equipped with one BRI2 card, one EXT-CID card, and 4 Super Hybrid Ports.
For system expansion, optional service cards can be installed.
Construction of Main Unit
EXT-CID card
(installed by default)
BRI2 card
(installed by default)
Main Board
Front Cover Cable Cover

1.2 Basic System Construction
Installation Manual 17
1.2.2 System Connection Diagram
Doorphone & Door Opener
BGM/Music On Hold (MOH)
Pager/
Speaker
Voice Processing
System
KX-T7636/
KX-T7633
Remote PC
PC
Printer
Router
Private
IP Network
Trunk (Telephone Company Lines)
Analogue/BRI
Hybrid IP-PBX
SLT
CSPS
Wireless Phone
Fax Machine
PC
USB
KX-T7600 DPT KX-T7600 DPT
APT DSS Console
DSS Console
DPT
ISDN Telephone
Amplifier
Server PC
PC PC
SLT
DPT

1.2 Basic System Construction
18 Installation Manual
*1 One BRI2 and one EXT-CID card are installed by default.
*2 The Hybrid IP-PBX has 4 Super Hybrid Ports pre-installed.
SLT Wireless Phone Fax Machine
PCKX-T7636/KX-T7633 DSS
Console
Doorphone & Door Opener
Private
IP Network
Station Message
Detail Recording (SMDR)
PC
Router
ISDN BRI Line
ISDN BRI Line
(Digital Trunk)
(Digital Trunk)
ISDN BRI Line
(Digital Trunk)
DLC8
(KX-TDA3172)
SLC8
(KX-TDA3174)
DPH4
(KX-TDA3161)
DPH2
(KX-TDA3162)
ECHO8
(KX-TDA3166)
EXT-CID
*1
(KX-TDA3168)
MSG2
(KX-TDA3191)
IP-GW4
(KX-TDA3480)
Telephone
Company
SLT Wireless Phone Fax Machine
Hybrid IP-PBX
DPT
APT DPT DSS Console
Voice
Processing
System
Voice
Processing
System
Radio
Amplifier Pager/Speaker
Server PC
PT-interface CS PS
4 Super Hybrid Ports*2
PT-interface CS PS
Main Board
KX-T7600 DPT KX-T7600 DPT
Analogue
Trunk
BRI2
*1
(KX-TDA3280)
BRI1
(KX-TDA3283)
LCOT2
(KX-TDA3183)

1.3 Options
Installation Manual 19
1.3 Options
1.3.1 Options
Model No. Model Name Description Maximum
Quantity
KX-TDA3161 4-Port Doorphone Card
(DPH4)
4-port doorphone card for 4 doorphones
and 4 door openers.
1
KX-TDA3162 2-Port Doorphone Card
(German Type) (DPH2)
2-port doorphone card for 2 German
type doorphones and 2 door openers.
1
KX-TDA3166 8-Channel Echo Canceller
Card (ECHO8)
8-channel card for echo cancellation
during conferences.
1
KX-TDA3168 Extension Caller ID Card
(EXT-CID)
Sends Caller ID signals to extension
ports.
1*1
*1 One EXT-CID card is installed by default.
KX-TDA3172 8-Port Digital Extension
Card (DLC8)
8-port digital extension card for DPTs,
DSS consoles, a VPS, and PT-interface
CSs.
1
KX-TDA3174 8-Port Single Line
Telephone Extension Card
(SLC8)
8-port extension card for SLTs. 1
KX-TDA3183 2-Port Analogue Trunk Card
(LCOT2)
2-port analogue trunk card. 1
KX-TDA3191 2-Channel Message Card
(MSG2)
2-channel message card. 2
KX-TDA3280 2-Port BRI Card (BRI2) 2-port ISDN Basic Rate Interface card.
EURO-ISDN/ETSI compliant.
2*2
*2 One BRI2 card is installed by default. One more BRI2 card can be installed in the Hybrid IP-PBX as an option.
KX-TDA3283 1-Port BRI Card (BRI1) 1-port ISDN Basic Rate Interface card.
EURO-ISDN/ETSI compliant.
1
KX-TDA3480 4-Channel VoIP Gateway
Card (IP-GW4)
4-channel VoIP gateway card. VoIP
H.323 V.2, ITU-T G.729a, G.723.1 and
G.711 compliant.
1

1.4 Specifications
20 Installation Manual
1.4 Specifications
1.4.1 General Description
Switching Non-blocking
AC Adaptor AC Input 100 V AC to 240 V AC, 1.5 A, 50 Hz/60 Hz
DC Output 40 V, 1.38 A (55.2 W)
DC Input 40 V, 1.38 A (55.2 W)
Maximum Power Failure
Tolerance
300 ms
Memory Backup Duration 7 years
Dialling Trunk Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialling
Extension Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialling
Connectors Trunk RJ45 (2 wire) ×each trunk port
Extension RJ45 (4 wire) ×each extension port
Paging Output 1 conductor jack
External MOH
(Music on Hold)
Output
1 conductor jack
Mode Conversion DP-DTMF, DTMF-DP
Ring Frequency 20 Hz/25 Hz (selectable)
Trunk Loop Limit 1600 maximum
Operating
Environment
Temperature 0 °C to 40 °C
Humidity 10 % to 90 % (non-condensing)
Conference Call Trunk From 10 ×3-party conference call to 4 ×8-party conference call
Music on Hold 1 port (Level Control: -11 dB to +11 dB in 1 dB steps)
Selectable Tone/External Music Source port
Paging Internal Level Control: -15 dB to +6 dB in 3 dB steps
External 1 port (Volume Control: -15 dB to +15 dB in 1 dB steps)
Serial Interface
Port
RS-232C 1 (maximum 115.2 kbps)
USB 1