Panasonic KX-TDE100 User manual

Model No. KX-TDE100
KX-TDE200
Pure IP-PBX
Installation Manual
Thank you for purchasing a Panasonic Pure IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDE100/KX-TDE200: PMMPR Software File Version 1.0000 or later SD Logo is
a trademark.

2 Installation Manual
System Components
System Components Table
Category Model No. Description
Shelves KX-TDE100 Basic Shelf
KX-TDE200 Basic Shelf
Main Processing Card IP Convergence Main Processing Card (IPCMPR)
IPCMPR Option Cards KX-TDE0110 16-Channel VoIP DSP Card (DSP16)
KX-TDE0111 64-Channel VoIP DSP Card (DSP64)
KX-TDA0196 Remote Card (RMT)
Activation Key Cards KX-NCS4104 4-Channel IP Trunk Activation Key (4 IP Trunk)
KX-NCS4208 8-Channel IP Softphone/IP Proprietary Telephone Activation
Key (8 IP Softphone/IP PT)
KX-NCS4508 8-Channel IP Proprietary Telephone Activation Key (8 IP PT)
KX-NCS4716 16-Channel SIP Extension Activation Key (16 SIP
Extension)
KX-NCS4910 Activation Key for Software Upgrade to Enhanced Version
(Software Upgrade 01)
Virtual Trunk Cards - Virtual 16-Channel VoIP Gateway Card (V-IPGW16)
- Virtual 16-Channel SIP Trunk Card (V-SIPGW16)
Virtual Extension Cards - Virtual 32-Channel VoIP Extension Card (V-IPEXT32)
- Virtual 32-Channel SIP Extension Card (V-SIPEXT32)

Installation Manual 3
Physical Trunk Cards KX-TDA0180 8-Port Analogue Trunk Card (LCOT8)
KX-TDA0181 16-Port Analogue Trunk Card (LCOT16)
KX-TDA0182 8-Port DID Card (DID8)
KX-TDA0183 4-Port Analogue Trunk Card (LCOT4)
KX-TDA0184 8-Port E & M Trunk Card (E&M8)
KX-TDA0187 T-1 Trunk Card (T1)
KX-TDA0188 E-1 Trunk Card (E1)
KX-TDA0189 8-Port Caller ID/Pay Tone Card (CID/PAY8)
KX-TDA0193 8-Port Caller ID Card (CID8)
KX-TDA0284 4-Port BRI Card (BRI4)
KX-TDA0288 8-Port BRI Card (BRI8)
KX-TDA0290CE/CJ PRI Card (PRI30)
KX-TDA0290 PRI Card (PRI23)
KX-TDA0484 4-Channel VoIP Gateway Card (IP-GW4E)
KX-TDA0490 16-Channel VoIP Gateway Card (IP-GW16)
Physical Extension Cards KX-TDA0143 4 Cell Station Interface Card (CSIF4)
KX-TDA0144 8 Cell Station Interface Card (CSIF8)
KX-TDA0170 8-Port Digital Hybrid Extension Card (DHLC8)
KX-TDA0171 8-Port Digital Extension Card (DLC8)
KX-TDA0172 16-Port Digital Extension Card (DLC16)
KX-TDA0173 8-Port Single Line Telephone Extension Card (SLC8)
KX-TDA0174 16-Port Single Line Telephone Extension Card (SLC16)
KX-TDA0175 16-Port Single Line Telephone Extension with Message
Lamp Card (MSLC16)
KX-TDA0470 16-Channel VoIP Extension Card (IP-EXT16)
Other Physical Cards KX-TDA0161 4-Port Doorphone Card (DPH4)
KX-TDA0162 2-Port Doorphone Card (German Type) (DPH2)
KX-TDA0164 4-Port External Input/Output Card (EIO4)
KX-TDA0166 16-Channel Echo Canceller Card (ECHO16)
KX-TDA0168 Extension Caller ID Card (EXT-CID)
KX-TDA0190 Optional 3-Slot Base Card (OPB3)
KX-TDA0191 4-Channel Message Card (MSG4)
System Components Table
Category Model No. Description

4 Installation Manual
Compatible Panasonic Proprietary Telephones
The PBX supports the following telephones:
• IP proprietary telephones (e.g., KX-NT300 series)
• IP softphones (e.g., KX-NCS8100)
• Digital proprietary telephones (e.g., KX-T7600 series)
• Analogue proprietary telephones (e.g., KX-T7700 series)
• Portable stations (e.g., KX-TCA355, KX-TCA256, KX-TD7690)
• DSS consoles (e.g., KX-T7640)
• Single line telephones (e.g., KX-T7710)
Incompatible Panasonic Proprietary Telephones
The PBX does not support the following telephones:
• KX-T30800 series proprietary telephones and DSS consoles
• KX-T61600 series proprietary telephones and DSS consoles
• KX-T123200 series proprietary telephones and DSS consoles
• KX-TD7500 DECT portable station
Power Supply Units
(PSUs)
KX-TDA0103 L-Type Power Supply Unit (PSU-L)
KX-TDA0104 M-Type Power Supply Unit (PSU-M)
KX-TDA0108 S-Type Power Supply Unit (PSU-S)
Cell
Stations
(CSs)
Basic CSs KX-TDA0141CE 2-Channel Cell Station Unit Using a DHLC/DLC Card (PT-
interface CS) for DECT Portable Station
KX-TDA0141 2-Channel Cell Station Unit Using a DHLC/DLC Card (PT-
interface CS) for 2.4 GHz Portable Station
KX-TDA0142CE 4-Channel Cell Station Unit Using a CSIF Card for DECT
Portable Station
KX-TDA0142 3-Channel Cell Station Unit Using a CSIF Card for 2.4 GHz
Portable Station
KX-TDA0151 2-Channel Cell Station Unit Using a DHLC/DLC Card (PT-
interface CS) for 2.4 GHz Portable Station
KX-TDA0152 3-Channel Cell Station Unit Using a CSIF Card for 2.4 GHz
Portable Station
High-density
CSs
KX-TDA0158CE 8-Channel High-density Cell Station Unit Using a DHLC/DLC
Card (PT-interface CS) for DECT Portable Station
Proprietary Equipment KX-A228 S/M-type Back-up Battery Cable
KX-A229 L-type Back-up Battery Cable
KX-A258 Blank Slot Cover
KX-T30865 Doorphone
System Components Table
Category Model No. Description

Installation Manual 5
Notes
• For the equipment (e.g., Add-on Key Module, USB Module, Headset*1) that can be connected to a
particular telephone, refer to the telephone's manual.
• For other equipment that can be connected to the PBX, refer to "1.2.2 System Connection
Diagram".
List of Abbreviations
•APT→Analogue Proprietary Telephone
•DPT→Digital Proprietary Telephone
•IP-PT→IP Proprietary Telephone
•PS→Portable Station
•PT→Proprietary Telephone
• SIP Extension →Session Initiation Protocol Extension (SIP hardphones/SIP softphones)
•SLT→Single Line Telephone
Notice
• Some optional service cards and features are not available for certain countries/areas. Consult
your certified Panasonic dealer for detailed instructions.
• In this manual, the suffix of each model number (e.g., KX-TDE100NE) is omitted unless necessary.
• This PBX supports SIP Extensions. However, some PBX features may not be available for SIP
Extensions, depending on your telephone type.
*1 The KX-T7090 headset can be connected to the KX-T7000, KX-T7200, KX-T7300, KX-T7400, and KX-T7500 (except for KX-T7560/KX-
T7565) series telephones.
Important Notice
Prior to connection of this product, please verify that the intended operating environment is supported.
Satisfactory performance cannot be guaranteed for the following:
– interoperability and compatibility with all devices and systems connected to this product
– proper operation and compatibility with services provided by telecommunications companies over
connected networks

6 Installation Manual
Important Safety Instructions
SAFETY REQUIREMENTS
When using your telephone equipment, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Clean with a damp cloth.
4. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool.
5. Do not place the product on an unstable surface, as a fall may cause serious internal damage.
6. Slots and openings in the front, back and bottom of the cabinet are provided for ventilation; to protect
it from overheating, these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface while in use. The product
should never be placed near or over a radiator or other heat source. This product should not be placed
in a sealed environment unless proper ventilation is provided.
7. The product should only be connected to the type of electrical power supply specified on the product
label. If you are not sure of the type of power supply to your home, consult your dealer or local power
company.
8. For safety purposes this unit is equipped with an earthed plug. If you do not have an earthed outlet,
please have one installed. Do not bypass this safety feature by tampering with the plug.
9. Do not allow anything to rest on the power cord. Do not locate this product where the power cord may
be stepped on or tripped on.
10. To reduce the risk of fire or electric shock, do not overload wall outlets and extension cords.
11. Do not insert objects of any kind into this product through its slots and openings, as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill
liquid of any kind on or in the product.
12. To reduce the risk of electric shock, do not disassemble this product. Only qualified personnel should
service this product. Opening or removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock.
13. Unplug this product from the wall outlet and have it serviced by qualified service personnel in the
following cases:
a) When the power supply cord or plug is damaged or frayed.
b) If liquid has been spilled into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate according to the operating instructions. Adjust only the controls that
are explained in the operating instructions. Improper adjustment of other controls may result in
damage and may require service by a qualified technician to restore the product to normal
operation.
e) If the product has been dropped or the cabinet has been damaged.
f) If product performance deteriorates.
14. Avoid using wired telephones during an electrical storm. There is a remote risk of electric shock from
lightning.
15. Do not use a telephone in the vicinity of a gas leak to report the leak.

Installation Manual 7
SAVE THESE INSTRUCTIONS

8 Installation Manual
Precaution
• Keep the unit away from heating appliances and devices that generate electrical noise such as
fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of
the PBX.
• This unit should be kept free of dust, moisture, high temperature (more than 40 ) and vibration, and
should not be exposed to direct sunlight.
• If you are having problems making calls to outside destinations, follow this procedure to test the trunks:
1. Disconnect the PBX from all trunks.
2. Connect known working SLTs to those trunks.
3. Make a call to an external destination using those SLTs.
If a call cannot be carried out correctly, there may be a problem with the trunk that the SLT is connected
to. Contact your telephone company.
If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX to the
trunks until it has been serviced by an authorised Panasonic Factory Service Centre.
• Wipe the unit with a soft cloth. Do not clean with abrasive powders or with chemical agents such as
benzene or thinner.
For users in the European Union only
•Information on Disposal for Users of Waste Electrical & Electronic Equipment (private
households)
This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste. For proper treatment, recovery
and recycling, please take these products to designated collection points, where they will be accepted
on a free of charge basis. Alternatively, in some countries you may be able to return your products to
your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly
will help to save valuable resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling. Please contact your local
authority for further details of your nearest designated collection point. Penalties may be applicable for
incorrect disposal of this waste, in accordance with national legislation.
•For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
•Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact your
local authorities or dealer and ask for the correct method of disposal.
˚
C

Installation Manual 9
For users in Germany only
• Machine Noise Information Ordinance, 3rd GPSGV: The highest sound pressure level is 70 dB (A) or
less according to EN ISO 7779.
For users in Finland, Norway and Sweden only
• This unit may only be installed in a room or space with restricted access, and equipotential bonding
must be applied. For information on earthing, refer to "3.2.5 Frame Earth Connection".
For users in New Zealand only
• This equipment shall not be set to make automatic calls to the Telecom '111' Emergency Service.
• The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted
that the item complies with minimum conditions for connection to its network. It indicates no
endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides
no assurance that any item will work correctly in all respects with another item of Telepermitted
equipment of a different make or model, nor does it imply that any product is compatible with all of
Telecom's network services.
• This equipment is not capable, under all operating conditions, of correct operation at the higher speeds
for which it is designed. Telecom will accept no responsibility should difficulties arise in such
circumstances.
• Some parameters required for compliance with Telecom's Telepermit requirements are dependent on
the equipment (PBX) associated with this modem. In order to operate within the limits for compliance
with Telecom's Specifications, the associated PBX equipment shall be set to ensure that modem calls
are answered between 3 and 30 seconds of receipt of ringing.
• Using the toll services of a company other than Telecom:
If the PBX is set up to use the toll services of a company other than Telecom, the telephone numbers
dialled from the Caller Display listings within the PBX will be directed through the toll services of the
other company because the telephone numbers include the toll access digit and area code digit. A toll
charge may be incurred. Please check with the toll carrier concerned.
• IMPORTANT NOTICE
Under power failure conditions, the connected telephones may not operate. Please ensure that a
separate telephone, not dependent on local power, is available for emergency use.
• APPLICABLE ONLY TO TELECOM CUSTOMERS WHO HAVE AUTOMATIC ACCESS TO OTHER
CARRIERS FOR TOLL CALLS
When calling back a number from the Caller ID list, all numbers prefixed with "0 + AREA CODE" will be
automatically forwarded to your toll carrier. This includes numbers in your local calling area. The zero
+ area code should either be removed when calling back local numbers, or check with your toll carrier
that a charge will not be levied.
• All persons using this device for recording telephone conversations shall comply with New Zealand law.
This requires that at least one party to the conversation is to be aware that it is being recorded. In
addition, the principles enumerated in the Privacy Act 1993 shall be complied with in respect to the
nature of the personal information collected, the purpose for its collection, how it is used, and what is
disclosed to any other party.
For users in Australia only
• No External TRC Terminal is provided due to an Internal Link between PE and TRC.

10 Installation Manual
For users in Taiwan only
• Lithium batteries can be found in the circuit boards of the main board and optional cards of the PBX.
Notes
• When disposing of any of the above products, all batteries must be removed. Follow the applicable
laws, regulations, and guidelines in your country/area regarding disposal of batteries.
• When replacing a battery, use only the same battery type, or an equivalent recommended by the
battery manufacturer.
Notice
Regarding removing or replacing a battery in the circuit board, consult your dealer.
WARNING
• DO NOT INSTALL THIS UNIT IN ANY OTHER WAY THAN DESCRIBED IN THIS
MANUAL.
• FOR SAFETY REASONS, DO NOT PHYSICALLY MODIFY THIS PRODUCT OR ANY
OPTIONAL EQUIPMENT.
• THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED SERVICE
PERSONNEL.
• IF DAMAGE TO THE UNIT EXPOSES ANY INTERNAL PARTS, DISCONNECT THE
POWER SUPPLY CORD IMMEDIATELY AND RETURN THE UNIT TO YOUR DEALER.
• UNPLUG THIS UNIT FROM THE AC OUTLET IF IT EMITS SMOKE, AN ABNORMAL
SMELL OR MAKES UNUSUAL NOISE. THESE CONDITIONS CAN CAUSE FIRE OR
ELECTRIC SHOCK. CONFIRM THAT SMOKE HAS STOPPED AND CONTACT AN
AUTHORISED PANASONIC FACTORY SERVICE CENTRE.
• WHEN RELOCATING THE EQUIPMENT, FIRST DISCONNECT THE TELECOM
CONNECTION BEFORE DISCONNECTING THE POWER CONNECTION. WHEN THE
UNIT IS INSTALLED IN THE NEW LOCATION, RECONNECT THE POWER FIRST,
AND THEN RECONNECT THE TELECOM CONNECTION.
• TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
• THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE.
ENSURE THAT THE AC OUTLET IS LOCATED NEAR THE EQUIPMENT AND IS
EASILY ACCESSIBLE.
• DANGER OF EXPLOSION EXISTS IF A BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE
BATTERY MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE
MANUFACTURER'S INSTRUCTIONS.

Installation Manual 11
• THE SD MEMORY CARD POSES A CHOKING HAZARD. KEEP THE SD MEMORY
CARD OUT OF REACH OF CHILDREN.
For Future Reference
Please print, record, and retain the following information for future reference.
Note
The serial number of this product can be found on the label affixed to the unit. You should record the
model number and the serial number of this unit as a permanent record of your purchase to aid in
identification in the event of theft.
MODEL NO.
SERIAL NO.
DATE OF PURCHASE
NAME OF DEALER
DEALER'S ADDRESS
DEALER'S TEL. NO.

12 Installation Manual
The KX-TDE100UK/KX-TDE200UK, the KX-TDE100NE/KX-TDE200NE, the KX-
TDE100GR/KX-TDE200GR, and the KX-TDE100CE/KX-TDE200CE are designed to
interwork with the:
• Analogue Public Switched Telephone Network (PSTN) of European countries
• Pan-European Integrated Services Digital Network (ISDN) using ISDN basic rate access
• Pan-European Integrated Services Digital Network (ISDN) using ISDN primary rate
access
• ONP 2048 kbit/s digital structured leased lines (D2048S)
Panasonic Communications Co., Ltd./Panasonic Communications Company (U.K.) Ltd. declares that
this equipment is in compliance with the essential requirements and other relevant provisions of Radio
& Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are available
for download by visiting:
http://www.doc.panasonic.de
Contact:
Panasonic Services Europe
a Division of Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany

Installation Manual 13
Introduction
This Installation Manual is designed to serve as an overall technical reference for the Panasonic Pure IP-
PBX, KX-TDE100/KX-TDE200. It provides instructions for installing the hardware, and programming the
PBX using the KX-TDE Maintenance Console.
The Structure of this Manual
This manual contains the following sections:
Section 1 System Outline
Provides general information on the PBX, including the system capacity and specifications.
Section 2 Activation Key Installation
Describes information on activation keys, including how to obtain an activation key and install it in the
SD Memory Card.
Section 3 Installation
Describes the procedures to install the PBX. Detailed instructions for planning the installation site,
installing the shelves and optional service cards, and cabling of peripheral equipment are provided.
Further information on system expansion and peripheral equipment installation is included.
Section 4 Guide for the KX-TDE Maintenance Console
Explains the installation procedure, structure, and basic information of the KX-TDE Maintenance
Console.
Section 5 Troubleshooting
Provides information on the PBX and telephone troubleshooting.
About the Other Manuals
Along with this Installation Manual, the following manuals are available:
Feature Guide
Describes all basic, optional and programmable features of the PBX.
PC Programming Manual
Provides step-by-step instructions for performing system programming using a PC.
PT Programming Manual
Provides step-by-step instructions for performing system programming using a PT.
User Manual
Provides operating instructions for end users using a PT, SLT, PS, or DSS Console.
About the software version of your PBX
The contents of this manual apply to PBXs with a certain software version, as indicated on the cover of this
manual. To confirm the software version of your PBX, see "How do I confirm the software version of the PBX
or installed cards?" in the FAQ of the PC Programming Manual, or "[190] Main Processing (MPR) Software
Version Reference" in the PT Programming Manual.
Trademarks
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by Matsushita Electric Industrial Co., Ltd. is under licence.
• Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
• Intel and Celeron are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the United States and other countries.

14 Installation Manual
• All other trademarks identified herein are the property of their respective owners.
• Screen shots reprinted with permission from Microsoft Corporation.

Installation Manual 15
Precautions for Users in the United Kingdom
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three-pin mains plug for your safety and convenience. A 5 amp
fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has
a rating of 5 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If
you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement
fuse cover can be purchased from your local Panasonic dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE AC OUTLET IN YOUR PREMISES, THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS
A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT-OFF PLUG IS INSERTED INTO ANY 13 AMP
SOCKET.
If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult
a qualified electrician.
WARNING
THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in the mains lead are coloured as follows:
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows.
The wire that is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug that is
marked with the letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire that is coloured BLUE must be connected to the terminal that is marked with the letter N or
coloured BLACK.
The wire that is coloured BROWN must be connected to the terminal that is marked with the letter L or
coloured RED.

16 Installation Manual
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse and fuse
cover.
The equipment must be connected to direct extension lines, and a payphone should not be connected as
an extension.
999 and 112 can be dialled on the apparatus after accessing the Exchange line for the purpose of making
outgoing calls to the BT emergency services.
During dialling, this apparatus may tinkle the bells of other telephones using the same line. This is not a fault
and we advise you not to call the Fault Repair Service.

Installation Manual 17
Table of Contents
1 System Outline......................................................................................21
1.1 System Highlights .......................................................................................................... 22
1.1.1 System Highlights............................................................................................................. 22
1.2 Basic System Construction........................................................................................... 26
1.2.1 Basic Shelf ....................................................................................................................... 26
1.2.2 System Connection Diagram............................................................................................ 27
1.3 Optional Equipment ....................................................................................................... 29
1.3.1 Optional Equipment.......................................................................................................... 29
1.4 Specifications ................................................................................................................. 32
1.4.1 General Description.......................................................................................................... 32
1.4.2 Characteristics.................................................................................................................. 34
1.4.3 System Capacity .............................................................................................................. 35
2 Activation Key Installation ...................................................................41
2.1 Information about the Activation Keys......................................................................... 42
2.1.1 Activation Keys ................................................................................................................. 42
2.1.2 Activation Key Card and Key Management System ......................................................... 44
2.1.3 Activation Key File ............................................................................................................ 45
3 Installation .............................................................................................47
3.1 Before Installation ..........................................................................................................48
3.1.1 Before Installation............................................................................................................. 48
3.2 Installation of the PBX ................................................................................................... 50
3.2.1 Unpacking......................................................................................................................... 50
3.2.2 Names and Locations....................................................................................................... 51
3.2.3 Opening/Closing the Front Cover ..................................................................................... 52
3.2.4 Installing/Replacing the Power Supply Unit ...................................................................... 54
3.2.5 Frame Earth Connection .................................................................................................. 58
3.2.6 Backup Battery Connection .............................................................................................. 59
3.2.7 Installing/Removing the Optional Service Cards .............................................................. 61
3.2.8 Types of Connectors......................................................................................................... 66
3.2.9 Attaching a Ferrite Core ...................................................................................................68
3.2.10 Fastening an Amphenol Connector.................................................................................. 71
3.2.11 Wall Mounting (KX-TDE200) ............................................................................................ 73
3.2.12 Wall Mounting (KX-TDE100) ............................................................................................ 75
3.2.13 Floor Standing (KX-TDE200 Only) ................................................................................... 77
3.2.14 Surge Protector Installation ..............................................................................................79
3.3 Information about the Main Processing Card.............................................................. 82
3.3.1 IPCMPR Card................................................................................................................... 82
3.3.2 DSP16 Card (KX-TDE0110) and DSP64 Card (KX-TDE0111)........................................ 85
3.3.3 RMT Card (KX-TDA0196) ................................................................................................ 86
3.4 Information about the Virtual Cards ............................................................................. 87
3.4.1 Virtual Cards..................................................................................................................... 87
3.5 Information about the Physical Trunk Cards ............................................................... 88
3.5.1 LCOT4 Card (KX-TDA0183), LCOT8 Card (KX-TDA0180), and LCOT16 Card (KX-
TDA0181) ......................................................................................................................... 88
3.5.2 DID8 Card (KX-TDA0182) ................................................................................................ 90
3.5.3 CID/PAY8 Card (KX-TDA0189)......................................................................................... 92

18 Installation Manual
3.5.4 CID8 Card (KX-TDA0193).................................................................................................93
3.5.5 E&M8 Card (KX-TDA0184) ...............................................................................................94
3.5.6 T1 Card (KX-TDA0187).....................................................................................................97
3.5.7 E1 Card (KX-TDA0188) ..................................................................................................100
3.5.8 BRI4 Card (KX-TDA0284) and BRI8 Card (KX-TDA0288)..............................................103
3.5.9 PRI30 Card (KX-TDA0290CE/CJ) ..................................................................................107
3.5.10 PRI23 Card (KX-TDA0290).............................................................................................111
3.5.11 IP-GW4E Card (KX-TDA0484)........................................................................................114
3.5.12 IP-GW16 Card (KX-TDA0490) ........................................................................................116
3.6 Information about the Physical Extension Cards ......................................................118
3.6.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144) .........................................118
3.6.2 DHLC8 Card (KX-TDA0170) ...........................................................................................120
3.6.3 DLC8 Card (KX-TDA0171)..............................................................................................123
3.6.4 DLC16 Card (KX-TDA0172)............................................................................................125
3.6.5 SLC8 Card (KX-TDA0173)..............................................................................................127
3.6.6 EXT-CID Card (KX-TDA0168) .........................................................................................129
3.6.7 SLC16 Card (KX-TDA0174) and MSLC16 Card (KX-TDA0175).....................................130
3.6.8 IP-EXT16 Card (KX-TDA0470) .......................................................................................132
3.7 Information about the Other Physical Cards..............................................................134
3.7.1 OPB3 Card (KX-TDA0190) .............................................................................................134
3.7.2 DPH4 Card (KX-TDA0161) .............................................................................................135
3.7.3 DPH2 Card (KX-TDA0162) .............................................................................................137
3.7.4 EIO4 Card (KX-TDA0164)...............................................................................................140
3.7.5 ECHO16 Card (KX-TDA0166) ........................................................................................143
3.7.6 MSG4 Card (KX-TDA0191).............................................................................................144
3.8 Connection of Extensions............................................................................................145
3.8.1 Maximum Cabling Distances of the Extension Wiring (Twisted Cable)...........................145
3.8.2 Parallel Connection of the Extensions ............................................................................146
3.8.3 Digital EXtra Device Port (Digital XDP) Connection........................................................148
3.8.4 First Party Call Control CTI Connection..........................................................................153
3.9 Connection of DECT Portable Stations.......................................................................154
3.9.1 Overview .........................................................................................................................154
3.9.2 Procedure Overview........................................................................................................156
3.9.3 Site Planning...................................................................................................................158
3.9.4 Before Site Survey ..........................................................................................................162
3.9.5 Site Survey Using the KX-TCA255/KX-TCA256/KX-TCA355/KX-TD7590 .....................167
3.9.6 After Site Survey .............................................................................................................171
3.9.7 Connecting a Cell Station to the PBX .............................................................................172
3.9.8 Wall Mounting .................................................................................................................182
3.10 Connection of 2.4 GHz Portable Stations ...................................................................186
3.10.1 Overview .........................................................................................................................186
3.10.2 Procedure Overview........................................................................................................187
3.10.3 Site Planning...................................................................................................................189
3.10.4 Before Site Survey ..........................................................................................................193
3.10.5 Site Survey......................................................................................................................196
3.10.6 After Site Survey .............................................................................................................200
3.10.7 Connecting a Cell Station to the PBX .............................................................................201
3.10.8 Wall Mounting .................................................................................................................209
3.11
Connection of Doorphones, Door Openers, External Sensors, and External Relays ...........213
3.11.1
Connection of Doorphones, Door Openers, External Sensors, and External Relays ............213

Installation Manual 19
3.12 Connection of Peripherals........................................................................................... 216
3.12.1 Connection of Peripherals .............................................................................................. 216
3.13 LAN Connection ........................................................................................................... 220
3.13.1 LAN Connection ............................................................................................................. 220
3.14 Power Failure Connections ......................................................................................... 221
3.14.1 Power Failure Connections............................................................................................. 221
3.15 Starting the PBX ........................................................................................................... 225
3.15.1 Starting the PBX............................................................................................................. 225
4 Guide for the KX-TDE Maintenance Console ...................................227
4.1 Overview ....................................................................................................................... 228
4.1.1 Overview......................................................................................................................... 228
4.2 PC Connection.............................................................................................................. 229
4.2.1 PC Connection ............................................................................................................... 229
4.3 Installation of the KX-TDE Maintenance Console ..................................................... 231
4.3.1 Installing and Starting the KX-TDE Maintenance Console............................................. 231
5 Troubleshooting ..................................................................................235
5.1 Troubleshooting ........................................................................................................... 236
5.1.1 Installation ...................................................................................................................... 236
5.1.2 Connection ..................................................................................................................... 239
5.1.3 Operation........................................................................................................................ 241
5.1.4 Using the Reset Button .................................................................................................. 243
5.1.5 Troubleshooting by Error Log ......................................................................................... 244
Index ..........................................................................................................247

20 Installation Manual