Model PT-VW330 PT-VX400NT PT-VX400 PT-VX41
Power supply 100-240 V AC, 50/60 Hz
Power consumption
322 W (0.48 W when standby mode
set to Eco*¹, 12.5 W when standby
mode set to Network.)
322 W (0.48 W when standby mode
set to Eco*¹, 14.5 W when standby
mode set to Network.)
322 W (0.48 W when standby mode set to Eco*¹,
10.0 W when standby mode set to Network.)
LCD panel
Panel size 15 mm (0.59 inches)
diagonal (16:10 aspect ratio)
16 mm (0.63 inches)
diagonal (4:3 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Pixels 1,024,000 (1,280 x 800) x 3,
total of 3,072,000 pixels
786,432 (1,024 x 768) x 3,
total of 2,359,296 pixels
Lens 1.6x manual zoom (throw ratio: 1.2–1.9:1),
manual focus, F 1.65–2.33, f 15.47–24.53 mm
1.2x manual zoom
(throw ratio: 1.7–2.1:1), manual focus,
F 1.60–1.76, f 22.33–26.80 mm
Lamp 245 W x 1, lamp replacement cycle (lamp power: Normal/Eco1, Eco2): 3,000 hours/5,000 hours*²
Screen size (diagonal) 0.76–7.62 m (30–300 inch),
16:10 aspect ratio 0.76–7.62 m (30–300 inch), 4:3 aspect ratio 1.02–7.62 m (40–300 inch),
4:3 aspect ratio
Brightness*³ 3,000 lm (lamp power: Auto/Normal) 4,000 lm (lamp power: Auto/Normal)
Center-to-corner uniformity*³ 85 %
Contrast*³ 2,000:1 (full on/full off, lamp power: Auto)
Resolution 1,280 x 800 pixels*⁴ 1,024 x 768 pixels*⁵
Scanning
frequency
HDMI fH: 25–80 kHz, fV: 50–85 Hz, dot clock: 162 MHz or lower
RGB (analog) fH: 15–100 kHz, fV: 50–100 Hz, dot clock: 140 MHz or lower
(Signals exceeding the dot clock rate of 140 MHz are downsampled.)
YPBPR(YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i(525i)] fH: 15.63 kHz, fV: 50 Hz [576i(625i)]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i] fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift 49:1 9:1
Keystone correction range Vertical: ±30°
(±20° when Real-Time Keystone)
Vertical: ±40°, Horizontal: ±30°
(Vertical: ±30°, Horizontal: ±20° when
Auto Keystone)
Vertical: ±30°
(±20° when Real-Time Keystone)
Installation Ceiling/floor, front/rear
Terminals
HDMI IN
HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200),*6
audio signal : linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
COMPUTER IN 1 D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCRx 1)
COMPUTER IN 2 /
MONITOR OUT
D-sub HD 15-pin (female) x 1 (RGB x1), (input/output selectable using on-screen menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
VIDEO IN RCA pin x 1 (Composite VIDEO)
S-VIDEO IN Mini DIN 4-pin x 1 (S-VIDEO)
AUDIO IN RCA pin x 2 (L-R x 1) for VIDEO/S-VIDEO input
COMPUTERAUDIOIN1 M3 x 1 (L-R x 1)
COMPUTER AUDIO IN 2
(MIC IN) M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO OUT M3 x 1 (L-R x 1) for output (variable)
SERIAL IN D-sub 9-pin (male) x 1 for external control (RS-232C compliant)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
USB A —USB type-A (for the USB Memory
Viewer) x 1 —
USB B —USB type-B (for the USB Display/
Wireless Mouse) x 1 —
Built-in speaker 3.7 cm round shape x 1, output power: 10.0 W (monaural)
Noise level 35 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)
Cabinet materials Molded plastic
Dimensions (W x H x D) 350 x 97 x 277 mm (13.8” x 3.8” x 10.9”) (with legs at shortest position, not including protruding parts)
350 x 97 x 254 mm (13.8” x 3.8” x 10.0”)
(with legs at shortest position,
not including protruding parts)
Weight Approximately 3.5 kg (7.7 lbs) Approximately 3.6 kg (7.9 lbs) Approximately 3.5 kg (7.7 lbs) Approximately 3.4 kg (7.5 lbs)
Operating environment Operating temperature: 5°C–35°C (41°F–95°F), operating humidity: 20 %-80 % (no condensation)
Supplied accessories
Power cord x 1*⁷, power cord holder x 1, wireless remote control unit, batteries (AAA/R03/LR03 type x 2),
carrying bag x 1, computer cable (1.8 m, for VGA) x 1, filter cover
Software CD-ROM (Logo Transfer
Software, Multi Projector Monitoring &
Control Software)
Software CD-ROM
(Logo Transfer Software, Multi
Projector Monitoring & Control
Software, Wireless Manager ME 5.5)
Software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control Software)
Specifications
*1When the Standby mode is set to Eco, network functions such as standby on via LAN are not available.
Also, only certain commands can be received for external control using the serial terminal.
*2The values given for the recommended lamp replacement cycles are maximum.
*3Measurement, measuring conditions, and method of notation all comply with ISO 21118 international
standards.
*4Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
*5Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*6Compliant with VESA CVT-RB.
*7Power cords available (x 2) for the PT-VW330EA/ VX400NTEA/ VX400EA/VX41EA.
Specifications (built-in wireless LAN function)
Model PT-VW431D PT-VW435N PT-VW430 PT-VX505N PT-VX500
Power supply 100-240 V AC, 50/60 Hz
Power consumption
365 W [0.3 W when standby
mode set to Eco*1, 12.5 W
when standby mode set to
Network.(19.7 W with DIGITAL
LINK, 27.5 W when standby
mode of sound set to ON.)]
365 W (0.3 W when standby
mode set to Eco*1,
12.9 W when standby mode
set to Network.)
365 W (0.3 W when standby
mode set to Eco*1,
11.5 W when standby mode
set to Network.)
365 W (0.3 W when standby
mode set to Eco*1,
12.9 W when standby mode
set to Network.)
365 W (0.3 W when standby
mode set to Eco*1,
11.5 W when standby mode set
to Network.)
LCD panel
Panel size 15 mm (0.59 inches)
diagonal (16:10 aspect ratio)
16 mm (0.63 inches)
diagonal (4:3 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Pixels 1,024,000 (1,280 x 800) x 3,
total of 3,072,000 pixels
786,432 (1,024 x 768) x 3,
total of 2,359,296 pixels
Lens 1.6x manual zoom (throw ratio: 1.18–1.90:1),
manual focus, F 1.60–2.12, f 15.28–24.62 mm
Lamp 280 W x 1, lamp replacement cycle (lamp power: Normal/Eco): 2,500 hours/4,000 hours*²
Screen size (diagonal) 0.76–7.62 m (30–300 inch),
16:10 aspect ratio
0.76–7.62 m (30–300 inch),
4:3 aspect ratio
Brightness*³ 4,300 lm (lamp power: Normal) 5,000 lm (lamp power: Normal)
Center-to-corner uniformity*³ 85 %
Contrast*³ 3,500:1 (full on/full off, lamp power: Normal, Iris: On) 4,000:1 (full on/full off, lamp power: Normal, Iris: On)
Resolution 1,280 x 800 pixels*⁴ 1,024 x 768 pixels*⁵
Scanning
frequency
HDMI/
DIGITAL LINK
(PT-VW431D only)
fH
: 25–80 kHz,
fV:
24–85 Hz,
dot clock: 162 MHz or lower
fH: 25–80 kHz, fV: 50–85 Hz, dot clock: 162 MHz or lower
RGB (analog) fH: 15–100 kHz, fV: 50–100 Hz, dot clock: 140 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)
YPBPR(YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i(525i)] fH: 15.63 kHz, fV: 50 Hz [576i(625i)]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i] fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical: +48 % Vertical: +40 %
Keystone correction range Vertical: ±30° (±20° when Real-Time Keystone)
Installation Ceiling/floor, front/rear
Terminals
HDMI IN
HDMI 19-pin x 1 (Deep Color,
compatible with HDCP)
480p, 576p, 720/60p,
720/50p, 1080/60i, 1080/50i,
1080/24p, 1080/60p,
1080/50p, VGA (640 x 480)-
WUXGA (1,920 x 1,200),*
6
audio signal : linear PCM
(sampling frequencies:
48 kHz, 44.1 kHz, 32 kHz)
HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200),*6
audio signal : linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
COMPUTER IN 1 D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCRx 1)
COMPUTER IN 2/
MONITOR OUT
D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output selectable using on-screen menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
VIDEO IN RCA pin x 1 (Composite VIDEO)
S-VIDEO IN Mini DIN 4-pin x 1 (S-VIDEO)
AUDIO IN RCA pin x 2 (L-R x 1) for VIDEO/S-VIDEO input
COMPUTER AUDIO IN 1 M3 x 1 (L-R x 1)
COMPUTER AUDIO IN 2
(MIC IN) M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO OUT M3 x 1 (L-R x 1) for output (variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
LAN — RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
LAN/DIGITAL LINK
RJ-45 x 1
for network/DIGITAL LINK
connection (Video, audio
and control signals),
10Base-T/100Base-TX,
compliant with PJLink™
(class 1), Deep Color,
compatible with HDCP
—
USB A — USB type-A (for the USB
Memory Viewer) x 1 —USB type-A (for the USB
Memory Viewer) x 1 —
USB B — USB type-B (for the USB
Display/Wireless Mouse) x 1 —USB type-B (for the USB
Display/Wireless Mouse) x 1 —
Built-in speaker 4 cm round shape x 1, output power: 10.0 W (monaural)
Noise level 37 dB (lamp power: Normal), 29 dB (lamp power: Eco)
Cabinet materials Molded plastic
Dimensions (W × H × D) 379 x 107 x 305 mm (14.9” x 4.2” x 12.0”) (with legs at shortest position, not including protruding parts)
Weight Approximately 4.8 kg (10.6 lbs)
Operating environment
Operating temperature: 0°C-40°C [32°F-104°F]*7(less than 1,200 m [3,937 ft] above sea level, Fan control: OFF),
0°C-30°C [32°F-86°F] (between 1,200 m and 2,000 m [3,937 ft and 6,562 ft] above sea level, Fan control: ON1),
0°C-30°C [32°F-86°F] (between 2,000 m and 2,700 m [6,562 ft and 8,858 ft] above sea level, Fan control: ON2)
Operating humidity: 20 %-80 % (no condensation)
Supplied accessories
Power cord x 1*8, power cord holder x 1, wireless remote control unit, batteries (AAA/R03/LR03 type x 2),
carrying bag x 1, computer cable (1.8 m, for VGA) x 1
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software, Wireless
Manager ME 6.0)
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software, Wireless
Manager ME 6.0)
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
Specifications
*1When the Standby mode is set to Eco, network functions such as standby on via LAN are not available.
Also, only certain commands can be received for external control using the serial terminal.
*2The values given for the recommended lamp replacement cycles are maximum.
*3Measurement, measuring conditions, and method of notation all comply with ISO 21118 international
standards.
*4Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
*5Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*6Compliant with VESA CVT-RB.
*7When the ambient temperature is between 35°C and 40°C (95°F and 104°F), the lamp power should
be set to Eco.
*8Power cords available (x 2) for the PT-VW431DEA/ VW435NEA/ VW430EA/VX505NEA/ VX500EA.
* Not supported by IEEE802.11n.
* Not supported by IEEE802.11n.
Specifications (built-in wireless LAN function)
765
Easy Setting Function for Even Easier Setup
When the Auto Setup button is pressed, a camera inside the projector detects
the condition of the projected image. In addition to Auto Input Signal Search and
Auto Setup, the projector then makes the following adjustments. This makes
setup even easier.
A Wide Variety of Functions for Easy Setup
• Auto Input Signal Search
The Auto Input Signal Search function automatically detects the input signal
and selects the input channel based on the signal. This function lets you start a
presentation without any complicated setup required.
• Input Guidance Function
If the input signal cannot be detected, the Input Guidance function will display
connection instructions on the projector screen, for easy setup.
• Real-Time Keystone Correction*18
With Real-Time Keystone Correction, the projector automatically senses if you
adjust its angle (in the vertical direction) during operation and instantly makes
whatever keystone correction is necessary for optimal viewing.
• Color-board and Blackboard modes
Color-board and Blackboard modes adjust the colors to make high-quality
projection possible in rooms that don’t have a screen.
• Screen Fitting
The projection screen size and horizontal/vertical Keystone correction
(trapezoidal correction) are automatically adjusted to fit the screen.*19
• Focus Assist
A focusing guide is displayed to help the focus adjustment.
• Wall Color Compensation
When projecting onto a colored wall, blackboard, or other similar surface, the
white balance is automatically adjusted.
Easy Lamp/Air Filter Replacement
Simplifies Maintenance
For easier maintenance, you can replace the lamp from the top even after the
projector is installed on the ceiling. And the PT-VW431D/VW435N/VW430/
VX505N/VX500 have one air filter on the side and one on the back, while the
PT-VW330/ VX400NT/ VX400/ VX41 have one on the side and one on the
bottom. This eliminates the need to detach the projector from its ceiling bracket
and greatly simplifies maintenance.
Direct Power Off
The Direct Power Off function keeps the cooling fan turned on even when you
unplug the power cord right after use. This lets you put everything away and
carry the projector quickly to your next presentation or lecture.
Convenient Carrying Bag
A carrying bag with a handy shoulder strap comes
with the projector. This bag helps protect the
projector from impacts.
Side-by-Side and P-in-P Function*20 (PT-VW330)
for Effective Presentations and Lectures
Two different image sources can be simultaneously displayed onto a single
screen. You can also switch to P-in-P (Picture-in-Picture) mode and display a
sub-window onto the main screen. The sub-window can be positioned at any of
the four corners (upper left, upper right, lower left, lower right) to expand the
usable area as only a wide-screen projector can do.
Side-by-Side Mode P-in-P Mode
Effective theft prevention with the startup logo*• 21
Projector identification system for remote control allocation of up to six•
projectors
The Wireless Mouse function (PT-VW435N/ VX505N/VX400NT) enables you to•
operate a computer’s mouse pointer by the projector’s wireless remote control
Built-in closed caption decoder•
AMX D. D. compliant•
Other Features
Featured image: PT-VW430 Series
VW330
VX400NT
Convenient Functions for Portable and Ceiling-Mounted Applications
*18 Keystone correction is performed in the PT-VX400NT when using the Easy Setting function.
*19 If the screen border cannot be detected, the projection screen size adjustment is not made. In this case, only the horizontal/vertical Keystone correction is done.
*20 This function is not effective for some source combinations.
*21 The included Logo Transfer Software is required to upload a new logo.
VW330 VX400NT VX41VX400
VW435NVW431D VX505NVW430 VX500
VW330 VX400NT VX41VX400
VW435NVW431D VX505NVW430 VX500
VW330 VX400NT VX41VX400
VW435NVW431D VX505NVW430 VX500
VW330 VX400NT VX41VX400
VW435NVW431D VX505NVW430 VX500
Model PT-VW435N PT-VX505N
Standard IEEE802.11b/g/n
Infrastructure mode
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES),
128 bit/64 bit WEP, WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC],
EAP-FAST [MS-CHAPv2/GTC], EAP-TTLS [MD5/MS-CHAPv2])
Ad-hoc mode* 128 bit/64 bit WEP
Model PT-VX400NT
Standard IEEE802.11b/g/n
Infrastructure mode
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES),
128 bit/64 bit WEP, WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC],
EAP-FAST [MS-CHAPv2/GTC], EAP-TTLS [MD5/MS-CHAPv2])
Ad-hoc mode* 128 bit/64 bit WEP