Panasonic AK-HRP1005G User manual

DVQP1926ZA
W0918MN0 -PS
ENGLISH
For details of operating Remote Operation Panel AK-HRP1005G, please
visit the Panasonic website (https://pro-av.panasonic.net/manual/en/index.
html), and refer to the Operating Instruction (HTML or PDF).
Read this document when using the AK-HRP1005G Remote Operation Panel in
conjunction with AJ-PX5000G Memory Card Camera-Recorder.
Operating Guide
Remote Operation Panel
Model No. AK-HRP1005G

Connecting the Unit to AJ-PX5000G Cameras 3
Connections 3
Compatible Functions List 4
ROP Menu (during AJ-PX5000G Connection) 7
ROP menu list 7
01 PAINT SWITCH 12
02 SHUTTER SPEED 13
03 PEDESTAL 14
04 CHROMA 15
05 GAIN 16
06 WHITE BALANCE MODE 17
07 FLARE 18
08 GAMMA 19
09 BLACK GAMMA 21
10 KNEE 22
11 DRS 23
12 HD DETAIL 24
13 HD SKIN TONE DTL 25
14 MATRIX 26
15 COLOR CORRECTION 27
16 IRIS RELATIVE 29
17 HI-COLOR 30
18 CAMERA MENU CONTROL 31
19 ROP SETTING 32
20 CONNECT SETTING 32
21 ROP IP SETTING 32
22 CAMERA IP SETTING 32
- 2 -
Table of Contents

Connecting the Unit to AJ-PX5000G Cameras
Connections
Use a dedicated cable to connect the <REMOTE> connector at the rear of the AJ-PX5000G to the AK-HRP1005G’s <CCU> con-
nector.
Set the connection setting to “Serial(AJ)” in the [CONNECT SETTING] menu.
ヒチバチヒヘ
ヤヰワワユヤヵチヴユヵヵリワヨヴㄆㄓㄊ㄂ㄍドモルナワヰワワヰワワヰワワヰワワヰワヤモヮヒヤモヮピヤモヮプヤモヮフヤモヮブヤモヮビヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナヤヰワワユヤヵチヮヰュユドㄑㄖㄔㄉナ
- 3 -
Connecting the Unit to AJ-PX5000G Cameras

Compatible Functions List
When the unit is used in conjunction with an AJ-PX5000G Memory Card Camera-Recorder, a portion of the unit’s button, dial, and other
control functions will be limited or disabled. Be sure to refer to the following table.
Front panel 1
Front panel 2
Front panel 3
Front panel 4
Front panel 5
Front panel 6
Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 1
[PANEL LOCK] button ✓
[AUTO] button ✓Only auto white balance and auto black balance will
function.
[BARS] button ✓Only the ON/OFF for the color bar signal output will
function.
[TALLY/CALL] lamp/button ×
[REF. RECALL] button ×
[FILES] button ×
[SETUP] button ✓
[AUTO IRIS] button ✓
Front panel 2
Function buttons ✓
LCD panel ✓
Menu operation dials ✓
- 4 -
Connecting the Unit to AJ-PX5000G Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 3
[GAIN] button ✓When this is set to ON, the [GAIN] menu appears on
the LCD panel.
[SHT] button ✓When this is set to ON, the [SHUTTER SPEED]
menu appears on the LCD panel.
[COLOR] button ✓The menus will switch with each press of the button.
[CHROMA] > [MATRIX] > [COLOR CORRECTION] >
Menu off (status screen)
[FILTER] button ×
[GAMMA] button ✓The menus will switch with each press of the button.
[GAMMA] > [BLACK GAMMA] > Menu off (status
screen)
[FLARE] button ✓The menus will switch with each press of the button.
[FLARE] > Menu off (status screen)
[KNEE] button ✓The menus will switch with each press of the button.
[KNEE] > Menu off (status screen)
[DTL] button ✓The menus will switch with each press of the button.
[HD DETAIL] > [HD SKIN TONE DTL] > Menu off
(status screen)
Front panel 4
[GAIN], [TEMP], [GAMMA], [SKIN]
adjustment block
✓When [GAIN] is lit:
Adjust [R GAIN] with the red (R) adjustment dial.
Adjust [B GAIN] with the blue (B) adjustment dial.
When [TEMP] is lit:
Adjust [COLOR TMP PRE] with the red (R) adjust-
ment dial.
Adjust [AWB A TEMP] with the green (G) adjust-
ment dial.
Adjust [AWB B TEMP] with the blue (B) adjustment
dial.
When [GAMMA] is lit:
Adjust [GAMMA R] with the red (R) adjustment dial.
Adjust [GAMMA MASTER] with the green (G) adjust-
ment dial.
Adjust [GAMMA B] with the blue (B) adjustment dial.
When [SKIN] is lit:
Adjust [Q PHASE] with the red (R) adjustment dial.
Adjust [I CENTER] with the green (G) adjustment
dial.
Adjust [CRISP] with the blue (B) adjustment dial.
[PED], [FLARE], [B.GAM] adjustment
block
✓When [PED] is lit:
Adjust [PED R] with the red (R) adjustment dial.
Adjust [MASTER PED] with the green (G) adjust-
ment dial.
Adjust [PED B] with the blue (B) adjustment dial.
When [FLARE] is lit:
Adjust [FLARE R] with the red (R) adjustment dial.
Adjust [FLARE G] with the green (G) adjustment
dial.
Adjust [FLARE B] with the blue (B) adjustment dial.
When [B.GAM] is lit:
Adjust [BLACK GAMMA MASTER] with the green
(G) adjustment dial.
- 5 -
Connecting the Unit to AJ-PX5000G Cameras

Number Part name
✓: Enabled
×: Disabled
Remarks
Front panel 5
[ALM] indicator ×
[OPT] indicator ×
[EXT] indicator ×
[D.EXT] indicator ×
Adjustment value display ✓ND filter/CC filter adjustment values are only dis-
played.
[ND] indicator ✓Displayed but cannot be adjusted.
[CC] indicator ✓Displayed but cannot be adjusted.
[IRIS] indicator ✓
[GAIN] indicator ✓
[PED] indicator ✓
[SHT] indicator ✓
[SYNC] indicator ✓
[DISP] button ✓
[UP (FREE)] button ✓
[DOWN (CHARA)] button ✓
[LOCK] indicator ✓
[SEL] dial ✓
Front panel 6
Memory card slot ✓
Memory card access indicator ✓
Camera number/tally display ✓Only camera numbers are displayed.
[IRIS RELATIVE] button ✓
Torque adjustment screw ✓
IRIS lever ✓
Master pedestal dial ✓
[PREVIEW] button ×
- 6 -
Connecting the Unit to AJ-PX5000G Cameras

ROP Menu (during AJ-PX5000G Connection)
ROP menu list
When an AJ-PX5000G Memory Card Camera-Recorder is connected, the ROP menu will be as follows.
For details on menu operations, refer to the following sections in the Operating Instructions.
“Displaying menus”
“Basic menu operations”
01 PAINT SWITCH
FLARE “FLARE” (see page 12)
GAMMA “GAMMA” (see page 12)
WHITE CLIP “WHITE CLIP” (see page 12)
KNEE MANUAL “KNEE MANUAL” (see page 12)
MATRIX “MATRIX” (see page 12)
COLOR CORRE “COLOR CORRE” (see page 12)
HD DTL “HD DTL” (see page 12)
SKIN DTL “SKIN DTL” (see page 12)
HI COLOR “HI COLOR” (see page 12)
02 SHUTTER SPEED
SHUTTER SPEED “SHUTTER SPEED” (see page 13)
SHUTTER SYNCHRO “SHUTTER SYNCHRO” (see page 13)
SW “SW” (see page 13)
MODE “MODE” (see page 13)
SYNCHRO SCN DSP “SYNCHRO SCN DSP” (see page 13)
03 PEDESTAL
PED R “PED R” (see page 14)
PED G “PED G” (see page 14)
PED B “PED B” (see page 14)
04 CHROMA CHROMA LEVEL “CHROMA LEVEL” (see page 15)
05 GAIN
AWB A R “AWB A R” (see page 16)
AWB A B “AWB A B” (see page 16)
AWB B R “AWB B R” (see page 16)
AWB B B “AWB B B” (see page 16)
AWB PRE R “AWB PRE R” (see page 16)
AWB PRE B “AWB PRE B” (see page 16)
06 WHITE BALANCE MODE
COLOR TEMP PRE “COLOR TEMP PRE” (see page 17)
AWB A TEMP “AWB A TEMP” (see page 17)
AWB B TEMP “AWB B TEMP” (see page 17)
WB CH SEL “WB CH SEL” (see page 17)
07 FLARE
FLARE R “FLARE R” (see page 18)
FLARE G “FLARE G” (see page 18)
FLARE B “FLARE B” (see page 18)
FLARE “FLARE” (see page 18)
- 7 -
ROP Menu (during AJ-PX5000G Connection)

08 GAMMA
GAMMA R “GAMMA R” (see page 19)
GAMMA MASTER “GAMMA MASTER” (see page 19)
GAMMA B “GAMMA B” (see page 19)
GAMMA SEL “GAMMA SEL” (see page 19)
F-REC DYNMC(%) “F-REC DYNMC(%)” (see page 19)
F-REC BLK STR(%) “F-REC BLK STR(%)” (see page 19)
V-REC KNEE SLOPE(%) “V-REC KNEE SLOPE(%)” (see page 20)
V-REC KNEE POINT(%) “V-REC KNEE POINT(%)” (see page 20)
GAMMA “GAMMA” (see page 20)
ABB (push) “ABB (push)” (see page 20)
09 BLACK GAMMA
BLACK GAMMA CURVE “BLACK GAMMA CURVE” (see page 21)
BLACK GAMMA RANGE “BLACK GAMMA RANGE” (see page 21)
10 KNEE
MASTER POINT % “MASTER POINT %” (see page 22)
MASTER SLOPE “MASTER SLOPE” (see page 22)
WHITE CLIP SW “WHITE CLIP SW” (see page 22)
WHITE CLIP LEVEL “WHITE CLIP LEVEL” (see page 22)
AUTO KNEE POINT % “AUTO KNEE POINT %” (see page 22)
AUTO KNEE LEVEL “AUTO KNEE LEVEL” (see page 22)
AUTO KNEE RSPNS “AUTO KNEE RSPNS” (see page 22)
KNEE MANUAL “KNEE MANUAL” (see page 22)
11 DRS
MODE “MODE” (see page 23)
EFFECT DEPTH “EFFECT DEPTH” (see page 23)
12 HD DETAIL
MASTER DETAIL “MASTER DETAIL” (see page 24)
DETAIL LV H “DETAIL LV H” (see page 24)
DETAIL LV V “DETAIL LV V” (see page 24)
FREQ “FREQ” (see page 24)
LEVEL DEPENDENT “LEVEL DEPENDENT” (see page 24)
CORING “CORING” (see page 24)
DETAIL SOURCE “DETAIL SOURCE” (see page 24)
CLIP “CLIP” (see page 24)
GAIN (+) “GAIN (+)” (see page 24)
GAIN (-) “GAIN (-)” (see page 24)
KNEE APE LV “KNEE APE LV” (see page 24)
HD DTL “HD DTL” (see page 24)
13 HD SKIN TONE DTL
SKIN DTL “SKIN DTL” (see page 25)
EFFECT “EFFECT” (see page 25)
DETECT TBL “DETECT TBL” (see page 25)
SKIN GET “SKIN GET” (see page 25)
ZEBRA MONI “ZEBRA MONI” (see page 25)
I CENTER “I CENTER” (see page 25)
I WIDTH “I WIDTH” (see page 25)
Q PHASE “Q PHASE” (see page 25)
Q WIDTH “Q WIDTH” (see page 25)
SKIN DTL SW “SKIN DTL SW” (see page 25)
- 8 -
ROP Menu (during AJ-PX5000G Connection)

14 MATRIX
TABLE “TABLE” (see page 26)
R-G “R-G” (see page 26)
R-B “R-B” (see page 26)
G-R “G-R” (see page 26)
G-B “G-B” (see page 26)
B-R “B-R” (see page 26)
B-G “B-G” (see page 26)
MATRIX “MATRIX” (see page 26)
15 COLOR CORRECTION
SAT R “SAT R” (see page 28)
SAT R-MG “SAT R-MG” (see page 28)
SAT MG “SAT MG” (see page 28)
SAT MG-B “SAT MG-B” (see page 28)
SAT B “SAT B” (see page 28)
SAT B-CY “SAT B-CY” (see page 28)
SAT CY “SAT CY” (see page 28)
SAT CY-G “SAT CY-G” (see page 28)
SAT G “SAT G” (see page 28)
SAT G-YI “SAT G-YI” (see page 28)
SAT YI “SAT YI” (see page 28)
SAT YI-R “SAT YI-R” (see page 28)
PHASE R “PHASE R” (see page 28)
PHASE R-MG “PHASE R-MG” (see page 28)
PHASE MG “PHASE MG” (see page 28)
PHASE MG-B “PHASE MG-B” (see page 28)
PHASE B “PHASE B” (see page 28)
PHASE B-CY “PHASE B-CY” (see page 28)
PHASE CY “PHASE CY” (see page 28)
PHASE CY-G “PHASE CY-G” (see page 28)
PHASE G “PHASE G” (see page 28)
PHASE G-YI “PHASE G-YI” (see page 28)
PHASE YI “PHASE YI” (see page 28)
PHASE YI-R “PHASE YI-R” (see page 28)
COLOR CORRE “COLOR CORRE” (see page 28)
16 IRIS RELATIVE
SENSE Refer to the following section in the Operating Instructions.
“29 IRIS RELATIVE”
COARSE
RELATIVE
17 HI-COLOR
HI-COLOR SW “HI-COLOR SW” (see page 30)
HI-COLOR LEVEL “HI-COLOR LEVEL” (see page 30)
18 CAMERA MENU CONTROL
MENU ON/OFF “MENU ON/OFF” (see page 31)
CURSOR/PARAMETER “CURSOR/PARAMETER” (see page 31)
EXECUTE “EXECUTE” (see page 31)
- 9 -
ROP Menu (during AJ-PX5000G Connection)

19 ROP SETTING
IRIS LEV MODE Refer to the following section in the Operating Instructions.
“37 ROP SETTING”
M.PED CONT
LOCK SELECT
AUTO BUTTON
G/M PED VOL
FREE+LOCK
CAM SEL
DTL BUTTON
SKIN VOL
LCD BRIGHT
PANEL BRIGHT
B.GAMMA VOL
BUZZER
PERIOD
CYCLE
STD POSITION M.GAIN
STD POSITION VAR
STD POSITION ND
STD POSITION CC
IRIS PRIORITY
ROP DATA SAVE
ROP DATA LOAD
SD CARD FORMAT
INITIAL with NW
INITIAL
UPGRADE
IRIS CALIBRATION TOP
IRIS CALIBRATION BOTTOM
SYSTEM VERSION
SOFT VERSION
FPGA VERSION
20 CONNECT SETTING
CONNECT MODE CAM1(push) Refer to the following section in the Operating Instructions.
“38 CONNECT SETTING”
CONNECT MODE CAM2 to CAM99
(push)
21 ROP IP SETTING
IP ADDRESS 1 Refer to the following section in the Operating Instructions.
“39 ROP IP SETTING”
IP ADDRESS 2
IP ADDRESS 3
IP ADDRESS 4
IP ADDRESS PORT
IP ADDRESS UPLOAD
SUBNET MASK 1
SUBNET MASK 2
SUBNET MASK 3
SUBNET MASK 4
SUBNET MASK UPLOAD
DEFAULT GATEWAY
DEFAULT GATEWAY UPLOAD
MAC ADDRESS
- 10 -
ROP Menu (during AJ-PX5000G Connection)