Panasonic KX-TGA760 User manual

Operating Instructions
Call Block dedicated Machine
Model No. KX-TGA710
KX-TGA760
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save
them for future reference.
For assistance, visit our Web site: http://shop.panasonic.com/
support for customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
Printed in Malaysia PNQX8877ZA PP1218MU0

Introduction
Accessory information ...............3
Graphical symbols for use on
equipment and their
descriptions ...............................4
Important Information
For your safety ...........................5
Important safety instructions ......6
For best performance ................6
Other information .......................7
Specifications ............................7
Getting Started
Setting up ..................................8
Controls .....................................9
Display icons .............................9
Language setting .....................10
Basic Operation
Caller ID service ......................11
Caller list ..................................12
Call block .................................12
Allow list ...................................13
Useful Information
Error messages .......................15
Troubleshooting .......................15
FCC and other information ......18
Appendix
Customer services ...................20
Limited Warranty (ONLY FOR
U.S.A.) .....................................21
Index
Index.........................................23
2
Table of Contents

Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
AAC adaptor/PNLV226-0X 1
BTelephone line cord/PNJA1210Z 1
A B
Other information
RDesign and specifications are subject to change without notice.
RThe illustrations in these instructions may vary slightly from the actual
product.
For assistance, please visit http://shop.panasonic.com/support 3
Introduction

Graphical symbols for use on equipment
and their descriptions
Symbol Explanation Symbol Explanation
Alternating current
(A.C.)
Class P equipment
(equipment in which
protection against
electric shock relies on
Double Insulation or
Reinforced Insulation)
Direct current (D.C.) “ON” (power)
Protective earth “OFF” (power)
Protective bonding
earth
Stand-by (power)
Functional earth “ON”/“OFF” (power;
push-push)
For indoor use only Caution, risk of electric
shock
4For assistance, please visit http://shop.panasonic.com/support
Introduction

For your safety
To prevent severe injury and loss
of life/property, read this section
carefully before using the product
to ensure proper and safe
operation of your product.
WARNING
Power connection
RUse only the power source
marked on the product.
RDo not overload power outlets
and extension cords. This can
result in the risk of fire or
electric shock.
RCompletely insert the AC
adaptor/power plug into the
power outlet. Failure to do so
may cause electric shock and/
or excessive heat resulting in a
fire.
RRegularly remove any dust, etc.
from the AC adaptor/power plug
by pulling it from the power
outlet, then wiping with a dry
cloth. Accumulated dust may
cause an insulation defect from
moisture, etc. resulting in a fire.
RUnplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These
conditions can cause fire or
electric shock. Confirm that
smoke has stopped emitting
and contact us at http://
shop.panasonic.com/support
RUnplug from power outlets and
never touch the inside of the
product if its casing has been
broken open.
RNever touch the plug with wet
hands. Danger of electric shock
exists.
Installation
RTo prevent the risk of fire or
electrical shock, do not expose
the product to rain or any type
of moisture.
RDo not allow the AC adaptor or
telephone line cord to be
excessively pulled, bent or
placed under heavy objects.
Operating safeguards
RUnplug the product from power
outlets before cleaning. Do not
use liquid or aerosol cleaners.
RDo not disassemble the product.
RDo not spill liquids (detergents,
cleansers, etc.) onto the
telephone line cord plug, or
allow it to become wet at all.
This may cause a fire. If the
telephone line cord plug
becomes wet, immediately pull
it from the telephone wall jack,
and do not use.
For assistance, please visit http://shop.panasonic.com/support 5
Important Information

CAUTION
Installation and location
RNever install telephone wiring
during an electrical storm.
RNever install telephone line
jacks in wet locations unless the
jack is specifically designed for
wet locations.
RNever touch uninsulated
telephone wires or terminals
unless the telephone line has
been disconnected at the
network interface.
RUse caution when installing or
modifying telephone lines.
RThe AC adaptor is used as the
main disconnect device. Ensure
that the AC outlet is installed
near the product and is easily
accessible.
Important safety
instructions
When using your product, basic
safety precautions should always
be followed to reduce the risk of
fire, electric shock, and injury to
persons, including the following:
1. Do not use this product near
water for example, near a
bathtub, washbowl, kitchen
sink, or laundry tub, in a wet
basement or near a swimming
pool.
2. Avoid using this product during
an electrical storm. There may
be a remote risk of electric
shock from lightning.
3. Do not use this product to
report a gas leak in the vicinity
of the leak.
4. Use only the power cord
indicated in this manual. Check
with local codes for possible
special disposal instructions.
SAVE THESE INSTRUCTIONS
For best
performance
Environment
RKeep the product away from
electrical noise generating
devices, such as fluorescent
lamps and motors.
RThe product should be kept free
from excessive smoke, dust,
high temperature, and vibration.
RThe product should not be
exposed to direct sunlight.
RDo not place heavy objects on
top of the product.
RWhen you leave the product
unused for a long period of
time, unplug the product from
the power outlet.
6For assistance, please visit http://shop.panasonic.com/support
Important Information

RThe product should be kept
away from heat sources such
as heating devices, cooking
appliances, etc. It should not be
placed in rooms where the
temperature is less than 0 °C
(32 °F) or greater than 40 °C
(104 °F). Damp basements
should also be avoided.
Routine care
RWipe the outer surface of the
product with a soft moist
cloth.
RDo not use benzine, thinner, or
any abrasive powder.
Other information
Notice for product disposal,
transfer, or return
RThis product can store your
private/confidential information.
To protect your privacy/
confidentiality, we recommend
that you erase information such
as call block list or caller list
entries from the memory before
you dispose of, transfer, or
return the product.
Notice
Specifications
RPower source:
120 V AC, 60 Hz
RPower consumption:
Standby: 1.0 W
Maximum: 4.3 W
ROperating conditions:
0 °C – 40 °C (32 °F – 104 °F),
20 % – 80 % relative air
humidity (dry)
For assistance, please visit http://shop.panasonic.com/support 7
Important Information

Setting up
Connections
Connect the AC adaptor to the
unit by pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the
power outlet.
Connect the telephone line
cord for your external phone
to the unit ("LINE IN" port),
then to the single-line
telephone jack (RJ11C) until
you hear a click.
A DSL/ADSL filter (not
supplied) is required if you
have a DSL/ADSL service.
Connect the supplied
telephone line cord to the unit
("PHONE" port), then connect
to your external phone.
Note:
RUse only the supplied
Panasonic AC adaptor
PNLV226.
LINE IN PHONE
3
4 6
5
6
4
1
2
Note when setting up
Note for connections
RThe AC adaptor must remain
connected at all times. (It is
normal for the adaptor to feel
warm during use.)
RThe AC adaptor should be
connected to a vertically
oriented or floor-mounted AC
outlet. Do not connect the AC
adaptor to a horizontally
8For assistance, please visit http://shop.panasonic.com/support
Getting Started

oriented AC outlet that faces
the floor, such as an AC outlet
installed on a ceiling or under a
table, as the weight of the
adaptor may cause it to become
disconnected.
Controls
C
G
H
D
E
A B
F
Ringer indicator
Display
MBLOCK LISTNMDN*1
MCALLER LISTNMCN*1
Speaker
MBLOCK CALLN
MERASENMEXITN
MMENUNMOKN
*1 MDN, or MCN: Scroll through
various list and items.
Display icons
Display items
Item Meaning
The line is in use by
your external phone.
Blocked call (page 12)
Allowed call (page 13)
Ringer indicator
Status Meaning
Green
Flashing
The call is being
received and it
matches a phone
number stored in
the allow list.
Red
Flashing
The call is being
received and it is
not matched a
phone number
stored in the call
block list and
allow list.
Red On
(5 seconds)
MBLOCK CALLN
is pressed when
receiving
incoming call.
For assistance, please visit http://shop.panasonic.com/support 9
Getting Started

Language setting
You can select either “English”
or “Español” as the language
used for the following features.
– Display
– Talking Caller ID announcement
The default setting is “English”.
1MMENUN
2MbN: “Language” a MOKN
3MbN: Select the desired setting
a MOKN a MEXITN
10 For assistance, please visit http://shop.panasonic.com/support
Getting Started

Caller ID service
Important:
RThis unit is Caller ID
compatible. To use Caller ID
features, you must subscribe to
a Caller ID service. Contact
your phone service provider for
details.
Caller ID features
When an outside call is being
received, the caller information is
displayed.
Caller information for the last 50
callers is logged in the caller list
from the most recent call to the
oldest.
RIf the unit cannot receive caller
information, the following is
displayed:
–“Out of area”: The caller
dials from an area which
does not provide a Caller ID
service.
–“Private”: The caller
requests not to send caller
information.
–“Long dist.”: The caller
makes a long distance call.
RIf the unit is connected to a PBX
system, caller information may
not be properly received.
Contact your PBX supplier.
Talking Caller ID
This feature lets you know who is
calling without looking at the
display.
To use this feature, you must:
– subscribe to a Caller ID service
of your phone service provider.
– turn this feature on.
When caller information is
received, the unit announce the
caller’s name or phone number
received from your phone service
provider.
RName pronunciation may vary.
This feature may not pronounce
all names correctly.
RCaller ID service has a limit of
how many characters can be
displayed. If the caller’s name is
too long, the unit may not be
able to display or announce the
entire name.
Setting Talking Caller ID
The default setting is “On” .
1MMENUN
2MbN: “Talking CID” a
MOKN
3MbN: Select the desired
setting. a MOKN a MEXITN
For assistance, please visit http://shop.panasonic.com/support 11
Basic Operation

Caller list
Viewing the caller list
1MCALLER LISTN
2Press MCN to search from the
most recent call, or MDN to
search from the oldest call.
3To exit, press MEXITN.
Erasing selected caller
information
1MCALLER LISTN
2MbN: Select the desired entry.
3MERASEN a MbN: “Yes” a
MOKN a MEXITN
Call block
The unit can block calls:
– when receiving the call from the
phone number in
pre-programmed call block list
(14000 items).
– by storing the desired items in
the user’s call block list
beforehand (up to 2000 items).
Note:
RThe numbers stored in the
pre-programmed call block list
cannot be displayed.
To disconnect the current call
and add a phone number to the
call block list
You can press the MBLOCK
CALLN button in the following
situations to disconnect the
current call and add a phone
number to the call block list:
– when an incoming call is being
received
– when talking on an outside call
using external phone
Once a phone number has been
added to the call block list, the unit
will block calls from that phone
number in the future.
1Press MBLOCK CALLN under
the situations shown above.
RThe call block number is
stored in the call block list,
“CALL BLOCKED” is
displayed, and then the call
is disconnected.
nYou can also block calls from
your external phone:
Press #01#
Note:
RIf the call has no phone
number, the call is blocked but it
is not stored in the call block list.
RBlocked calls are logged in the
caller list.
12 For assistance, please visit http://shop.panasonic.com/support
Basic Operation

Adding call blocked
numbers from the caller
list
1MCALLER LISTN
2MbN: Select the desired entry
to be blocked. a MOKN
3MbN: “Save Block list”
a MOKN
4MbN: “Yes” a MOKN a
MEXITN
Setting the block mode
The unit can block calls by setting
the following block mode
beforehand.
–“Unknown” : You can block
calls when no phone number is
provided, such as private
callers or out of area calls.
–“International” : You can
block the international call.
–“00 prefix” : You can block
calls whose phone number
starts with "00".
The default setting for each mode
is “Off”.
1MMENUN
2MbN: “Block mode” a MOKN
3MbN: Select the desired block
mode shown above. a MOKN
4MbN: Select the desired
setting. a MOKN a MEXITN
Viewing/erasing call
block numbers
1MBLOCK LISTN
2MbN: Select the desired entry.
RThe number of times the
entry was blocked is also
displayed.
RAfter viewing, press MEXITN
to exit.
3To erase a number:
MERASEN a MEXITN
Erasing all call block
numbers
1MBLOCK LISTN
2MMENUN a MbN: “Erase
all” a MOKN
3MbN: “Yes” a MOKN a
MEXITN
Allow list
You can allow specific callers to
pass through by adding the
caller’s phone number to the allow
list. You can store up to 100
phone numbers (14 digits max.). If
the phone number stored in the
allow list matches the incoming
Caller ID, the ringer indicator
flashes green and your external
phone rings.
For assistance, please visit http://shop.panasonic.com/support 13
Basic Operation

Adding allowed phone
numbers from the caller
list
1MCALLER LISTN
2MbN: Select the desired entry.
aMOKN
3MbN: “Save Allow list”
a MOKN
4MbN: “Yes” a MOKN a
MEXITN
Adding allowed phone
numbers manually
You can also add the phone
number in the allow list from your
external phone. We recommend
you operate while checking the
unit’s display.
1KX-TGA710/KX-TGA760:
MMENUN
2MbN: “Manually save #”
a MOKN
3MbN: “Save Allow #” a
MOKN
4Your external phone:
**91# a Enter the
phone number (14 digits
max.) a #
Viewing/erasing an entry
1MMENUN
2MbN: “Allow list” a MOKN
3MbN: Select the desired entry.
After viewing, press MEXITN to
exit.
4MERASEN a MEXITN
Erasing all entries
1MMENUN
2MbN: “Allow list” a MOKN
2 times
3MbN: “Erase all” a MOKN
4MbN: “Yes” a MOKN a
MEXITN
14 For assistance, please visit http://shop.panasonic.com/support
Basic Operation

Error messages
Display message Cause/solution
Check LINE IN RThe telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 8).
Not accepted RInvalid code or character is entered. Try again.
Troubleshooting
If you still have difficulties after following the instructions in this section,
disconnect the AC adaptor, then reconnect the AC adaptor.
General use
Problem Cause/solution
The unit does not
work.
RCheck the connections (page 8).
RUnplug the AC adaptor to reset the unit.
Reconnect the adaptor and try again.
The display is in a
language I cannot
read.
RChange the display language (page 8).
For assistance, please visit http://shop.panasonic.com/support 15
Useful Information

Caller ID/Talking Caller ID
Problem Cause/solution
Caller information
is not displayed.
RYou must subscribe to Caller ID service.
Contact your phone service provider for details.
RIf your unit is connected to any additional
telephone equipment such as a Caller ID box
or cordless telephone line jack, plug the unit
directly into the wall jack.
RIf you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the unit and the telephone line jack.
Contact your DSL/ADSL provider for details.
RThe name display service may not be available
in some areas. Contact your phone service
provider for details.
Caller information
is not announced.
RThe Talking Caller ID feature is turned off. Turn
it on (page 11).
Caller information
is not displayed on
your external
phone.
RTurn on the through mode using the following
method.
1MMENUN
2MbN: “Through mode” a MOKN
3MbN: “On” a MOKN a MEXITN
If you turn on the through mode, your
external phone rings once even if you
registered the phone number in the block
list.
16 For assistance, please visit http://shop.panasonic.com/support
Useful Information

Liquid damage
Problem Cause/solution
Liquid or other
form of moisture
has entered the
unit.
RDisconnect the AC adaptor and telephone line
cord from the unit. After the unit is completely
dry, reconnect the AC adaptor and telephone
line cord. If the unit does not work properly,
contact an authorized service center.
Caution:
RTo avoid permanent damage, do not use a microwave oven to speed
up the drying process.
For assistance, please visit http://shop.panasonic.com/support 17
Useful Information

FCC and other information
This equipment complies with Part 68
of the FCC rules and the requirements
adopted by the ACTA. On the bottom
of this equipment is a label that
contains, among other information, a
product identifier in the format
US:ACJ----------.
If requested, this number must be
provided to the telephone company.
LRegistration No.............(found on
the bottom of the unit)
LRinger Equivalence No.
(REN).......0.1A
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with
the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular
plug is provided with the product. It is
designed to be connected to a
compatible modular jack that is also
compliant.
The REN is used to determine the
number of devices that may be
connected to a telephone line.
Excessive RENs on a telephone line
may result in the devices not ringing in
response to an incoming call. In most
but not all areas, the sum of RENs
should not exceed five (5.0). To be
certain of the number of devices that
may be connected to a line, as
determined by the total RENs, contact
the local telephone company. For
products approved after July 23, 2001,
the REN for the product is part of the
product identifier that has the format
US:AAAEQ##TXXXX. The digits
represented by ## are the REN
without a decimal point (e.g., 03 is a
REN of 0.3).
If this equipment causes harm to the
telephone network, the telephone
company will notify you in advance
that temporary discontinuance of
service may be required. But if
advance notice isn't practical, the
telephone company will notify the
customer as soon as possible. Also,
you will be advised of your right to file
a complaint with the FCC if you
believe it is necessary.
The telephone company may make
changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment.
If this happens the telephone company
will provide advance notice in order for
you to make necessary modifications
to maintain uninterrupted service.
If trouble is experienced with this
equipment, for repair or warranty
information, please contact a Factory
Service Center or other Authorized
Servicer. If the equipment is causing
harm to the telephone network, the
telephone company may request that
you disconnect the equipment until the
problem is resolved.
Connection to party line service is
subject to state tariffs. Contact the
state public utility commission, public
service commission or corporation
18 For assistance, please visit http://shop.panasonic.com/support
Useful Information

commission for information.
If your home has specially wired alarm
equipment connected to the telephone
line, ensure the installation of this
equipment does not disable your
alarm equipment. If you have questions
about what will disable alarm
equipment, consult your telephone
company or a qualified installer.
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:(1)This
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
CAUTION:
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
device.
NOTE:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules.These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation.
Thisequipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
byturning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between
the equipment and receiver.
– Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an
experienced radio/TV technician for
help.
For assistance, please visit http://shop.panasonic.com/support 19
Useful Information

Customer services
Accessories!
hp://shop.panasonic.com/support
Customer Services Directory
Shop
for all your Panasonic gear
Go to
Get everything you need to get the most out of
your Panasonic products
Accessories & Parts for your Camera, Phone, A/V
products, TV, Computers & Networking, Personal
Care, Home Appliances, Headphones, Baeries,
Backup Chargers & more…
For Product Informa!on, Opera!ng Assistance,
Parts, Owner’s Manuals, Dealer and Service info
go to hp://shop.panasonic.com/support
For the hearing or speech impaired TTY: 1- 877-833-8855
As of June 2015
20 For assistance, please visit http://shop.panasonic.com/support
Appendix