Panasonic KX-TD816 User manual

KX-TD816
Model KX-TD1232
Digital Super Hybrid System
Installation Manual
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Panasonic
D816
DIGITAL SUPER HYBRID SYSTEM
Thank you for purchasing this Panasonic Model KX-TD816/KX-TD1232, Digital Super Hybrid System.
Please read this manual before connecting the Digital Super Hybrid System.

2System Components
System Components
System Components Table
Model Description
Service Unit KX-TD816
KX-TD1232 Digital Super Hybrid System (Main Unit) Digital Super Hybrid System (Main Unit)
Telephone KX-T7425
KX-T7433
KX-T7436
KX-T7450
KX-T7220
KX-T7230
KX-T7235
KX-T7250
KX-T7130
KX-T7020
KX-T7030
KX-T7033
KX-T7050
KX-T7055
Digital proprietary telephone
Digital proprietary telephone with 3-line display
Digital proprietary telephone with 6-line display
Digital proprietary telephone
Digital proprietary telephone
Digital proprietary telephone with 2-line display
Digital proprietary telephone with 6-line display
Digital proprietary telephone
Proprietary telephone with 1-line display
Proprietary telephone
Proprietary telephone with 1-line display
Proprietary telephone with 1-line display
Proprietary telephone
Proprietary telephone

System Components 3
*1Can be installed in the KX-TD816 only.
*2Can be installed in the KX-TD1232 only.
Note
• In this manual, the suffix of each model number are omitted.
• If your main unit is the KX-TDN1232, refer to the information of the KX-TD1232 in this
manual.
Optional
Equipment KX-T7440
KX-T7441
KX-T7240
KX-T7040
Digital DSS Console
DSS Console for Attendant
Digital DSS Console
DSS Console
KX-TD160
KX-TD170
KX-TD174
KX-TD180
KX-TD184
KX-TD185
KX-TD188*2
KX-TD190*1
KX-TD191*2
KX-TD192*2
KX-TD193
KX-TD194
KX-TD196*2
KX-TD197
KX-TD198*1
KX-TD199*1
KX-TD280
KX-TD286
KX-TD290*2
Doorphone Card
8-Station Line Unit
16 SLT Line Circuit Unit
4-CO Line Unit
E&M (TIE) Line Unit
4-DID Line Unit
E1 Unit
DISA Unit
DISA Card
System Inter Connection Card (two cards with Connection Cable)
Caller ID Card
SLT Message Waiting Lamp Adaptor Unit
Remote Card
High Speed Remote Card
Remote Unit
DISA Card
2-ISDN S0 Line Unit
6-ISDN S0 Line Unit
Primary Rate Interface ISDN Expansion Unit
KX-T30865
KX-T30890
KX-T7090
KX-A46
KX-A216
Doorphone
Headset (Earphone type)
Headset (Headphone type)
Battery Adaptor
Backup Battery and Adaptor Card
System Components Table
Model Description

4Important Information
Important Information
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
a) Read and understand all instructions.
b) Follow all warnings and instructions marked on the product.
c) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
d) Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool.
e) Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
f) Slots and openings in the cabinet and the back or bottom are provided for ventilation, to
protect it from overheating, these openings must not be blocked or covered. The
openings should never be blocked by placing the product on the bed, sofa, rug, or other
similar surface. This product should never be placed near or over a radiator or heat
register. This product should not be placed in a built-in installation unless proper
ventilation is provided.
g) This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your
dealer or local power company.
h) This product is equipped with a three wire grounding type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type
plug.
i) Do not allow anything to rest on the power cord. Do not locate this product where the
cord will be abused by people walking on it.
j) Do not overload wall outlets and extension cords as this can result in the risk of fire or
electric shock.
k) Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the product.
l) To reduce the risk of electric shock, do not disassemble this product, but take it to a
qualified serviceman when some service or repair work is required. Opening or
removing covers may expose you to dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when the appliance is subsequently used.
m)Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
1) When the power supply cord or plug is damaged or frayed.
2) If liquid has been spilled into the product.
3) If the product has been exposed to rain or water.

Important Information 5
4) If the product does not operate normally by following the operating instructions.
Adjust only those controls, that are covered by the operating instructions because
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal operation.
5) If the product has been dropped or the cabinet has been damaged.
6) If the product exhibits a distinct change in performance.
n) Avoid using a telephone (other than a cordless type) during an electrical storm. There
may be a remote risk of electric shock from lightning.
o) Do not use the telephone to report a gas leak in the vicinity of the leak.

6Attention
Attention
• Keep the unit away from heating appliances and electrical noise generating devices such as
fluorescent lamps, motors and televisions. These noise sources can interfere with the
performance of the Digital Super Hybrid System.
• This unit should be kept free of dust, moisture, high temperature (more than 40 °C) and
vibration, and should not be exposed to direct sunlight.
• Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.
• If there is any trouble, disconnect the unit from the telephone line. Plug the telephone
directly into the telephone line. If the telephone operates properly, do not reconnect the unit
to the line until the trouble has been repaired. If the telephone does not operate properly,
chances are that the trouble is in the telephone system, and not in the unit.
• Do not use benzine, thinner, or the like, or any abrasive powder to clean the cabinet. Wipe
it with a soft cloth.
• The ISDN Line Unit (e.g. KX-TD280) is in accordance with the European
Telecommunication Standards (ETS).
If your telephone company provides an ISDN service which follows the standards other
than ETS, some ISDN features in the Features Guide may not work properly. (e.g. Charge
Fee Reference, CLIP, COLP, etc.)
• TheprimaryRateInterface ISDN Expansion Unit(KX-TD290) is working in PCM30 mode
only.
• To use the point-to-multi-point configuration with the KX-TD286, the number on the name
plate, which is on the back of the unit, must be or later.
• To use the KX-TD170 or KX-TD174 with the KX-TD188 or KX-TD290, the number on
the name plate, which is on the back of the unit, must be or later.
WARNING
• THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED
SERVICE PERSONNEL.
• WHEN A FAILURE OCCURS WHICH RESULTS IN THE INTERNAL PARTS
BECOMING ACCESSIBLE, DISCONNECT THE POWER SUPPLY CORD
IMMEDIATELY AND RETURN THIS UNIT TO YOUR DEALER.
• DISCONNECT THE TELECOM CONNECTION BEFORE DISCONNECTING
THE POWER CONNECTION PRIOR TO RELOCATING THE EQUIPMENT,
AND RECONNECT THE POWER FIRST.
• THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR
SAFETY REASONS THIS PLUG MUST ONLY BE CONNECTED TO AN
EARTHINGCONTACTSOCKETWHICHHASBEENINSTALLEDACCORDING
TO REGULATIONS.
• THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE,
ENSURE THAT THE SOCKET-OUTLET IS LOCATED / INSTALLED NEAR THE
EQUIPMENT AND IS EASILY ACCESSIBLE.

Attention 7
• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
The serial number of this product may be found on the label affixed to the bottom
of the unit. You should note the serial number of this unit in the space provided
and retain this book as a permanent record of your purchase to aid in identification
in the event of theft.
MODEL NO.:
SERIAL NO.:
SERIAL NO.
(found on the bottom of the unit)
DATE OF PURCHASE
NAME OF DEALER
DEALER’S ADDRESS
DEALER’S TEL. NO.
For your future reference

8Introduction
Introduction
This Installation Manual provides technical information for the Panasonic Digital Super
Hybrid System, KX-TD816 / KX-TD1232. It is designed to serve as an overall technical
reference for the system and includes a description of the system, its hardware and software,
features and services and environmental requirements.
This manual contains the following sections:
Section 1, System Outline
Provides general information on the system including system capacity and specifications.
Section 2, General Installation
Contains the basic system installation and wiring instructions, as well as how to install the
optional cards and units.
Section 3, ISDN Installation
Contains the ISDN unit installation and wiring instructions.
Section 4, E1 Installation
Contains the E1 unit installation and wiring instructions.
Section 5, Troubleshooting
Provides information for system and telephone troubleshooting.
Section 6, Index
Provides the important words and phrases to help you access the required information easily.
Programming Guide References
The related and required programming titles described in the Programming Guide are noted for
your reference.
Programming Guide reference is also shown in the sentences as follows.
Example: <SYS PRG [109]>
Explanation: Refer to system programme [109] in the Programming Guide.
This helps you know the related and require programming easily for the contents of the
sentences.
Features Guide References
The related feature titles described in the Features Guide are noted for your reference.
About this Installation Manual
Terms used in this Installation Manual

Introduction 9
Along with this Installation Manual, the following manuals are available to help you know the
available features, programme and use the KX-TD816 / KX-TD1232 system.
Features Guide
Provides information about the system features.
Programming Guide
Provides system programming instructions.
User Manual
Provides operating instructions for the end users using proprietary telephones, single line
telephones or consoles.
About the other manuals

10 Table of Contents
Table of Contents
1 System Outline
1.1 System Highlights........................................................................................................ 14
1.1.1 System Highlights ...................................................................................................... 14
1.2 Basic System Construction ......................................................................................... 16
1.2.1 Basic System Construction......................................................................................... 16
1.2.2 System Connection Diagram...................................................................................... 17
1.3 Proprietary Telephones............................................................................................... 21
1.3.1 Proprietary Telephones............................................................................................... 21
1.4 Options.......................................................................................................................... 22
1.4.1 Options ....................................................................................................................... 22
1.4.2 Expansion Unit Combination ..................................................................................... 25
1.5 Specifications................................................................................................................ 27
1.5.1 General Description.................................................................................................... 27
1.5.2 Characteristics ............................................................................................................29
1.5.3 System Capacity......................................................................................................... 30
2 General Installation
2.1 Before Installation ....................................................................................................... 34
2.1.1 Before Installation ...................................................................................................... 34
2.2 Installation of the Main Unit...................................................................................... 36
2.2.1 Unpacking................................................................................................................... 36
2.2.2 Location of Interfaces................................................................................................. 37
2.2.3 Wall Mounting............................................................................................................ 41
2.2.4 Frame Ground Connection ......................................................................................... 43
2.2.5 Opening the Front Cover............................................................................................ 44
2.3 Connection.................................................................................................................... 45
2.3.1 Outside Line Connection............................................................................................ 45
2.3.2 Extension Connection................................................................................................. 48
2.3.3 Parallelled Telephone Connection.............................................................................. 55
2.3.4 EXtra Device Port (XDP) Connection........................................................................ 57
2.3.5 Polarity Sensitive Telephone Connection................................................................... 58
2.3.6 External Pager (Paging Equipment) Connection........................................................ 60
2.3.7 External Music Source Connection............................................................................ 62
2.3.8 Printer and PC Connection......................................................................................... 64
2.3.9 Installation of Lightning Protectors............................................................................ 67
2.4 Installation of Optional Cards and Unit.................................................................... 70
2.4.1 Location of Optional Cards and Units........................................................................ 70
2.4.2 4-CO Line Unit Connection ....................................................................................... 75
2.4.3 4-E&M (TIE) Line Unit Connection.......................................................................... 76
2.4.4 4-DID Line Unit Connection...................................................................................... 77
2.4.5 8-Station Line Unit Connection.................................................................................. 78
2.4.6 16 SLT Line Circuit Unit Connection ........................................................................ 79
2.4.7 Installing Expansion Unit........................................................................................... 80
2.4.8 Caller ID Card Installation ......................................................................................... 96
2.4.9 DISA Card / Unit and Remote Card / Unit Installation.............................................. 99
2.4.10 Doorphone and Door Opener Connection.............................................................. 106

Table of Contents 11
2.4.11 SLT Message Waiting Lamp Adaptor Unit Connection..........................................111
2.4.12 System Connection..................................................................................................120
2.4.13 Backup Battery and Adaptor Card Connection.......................................................122
2.4.14 Battery Adaptor Connection....................................................................................124
2.5 Auxiliary Connection for Power Failure Transfer...................................................127
2.5.1 Auxiliary Connection for Power Failure Transfer.....................................................127
2.6 Closing the Front Cover.............................................................................................129
2.6.1 Closing the Front Cover ............................................................................................129
2.7 Starting the System for the First Time.....................................................................131
2.7.1 Starting the System for the First Time ......................................................................131
2.8 System Restart............................................................................................................133
2.8.1 System Restart...........................................................................................................133
2.9 System Data Clear......................................................................................................134
2.9.1 System Data Clear.....................................................................................................134
3 ISDN Installation
3.1 ISDN Network Outline...............................................................................................136
3.1.1 Overview ...................................................................................................................136
3.2 ISDN Line Connection...............................................................................................138
3.2.1 Location of the Units.................................................................................................138
3.2.2 Installing the Unit......................................................................................................140
3.2.3 Internal ISDN S0 Line Connection...........................................................................145
4 E1 Installation
4.1 E1 Line Service Outline.............................................................................................150
4.1.1 Overview ...................................................................................................................150
4.2 E1 Line Installation....................................................................................................151
4.2.1 Location of the Unit ..................................................................................................151
4.2.2 Location of Interfaces................................................................................................152
4.2.3 Installing the Unit......................................................................................................153
5 Troubleshooting
5.1 Troubleshooting..........................................................................................................158
5.1.1 Installation.................................................................................................................158
5.1.2 Connection ................................................................................................................159
5.1.3 Operation...................................................................................................................162
5.1.4 Using the Reset Button..............................................................................................163
6 Index...............................................................................................165

12 Table of Contents

System Outline 13
Section 1
System Outline

1.1 System Highlights
14 SystemOutline
1.1 System Highlights
1.1.1 System Highlights
System Maximum Capacity
Actual capacity will depend on the number or/and type of units connected to the system.
Module Expansion
Expansion modules are used to increase the system capacity.
EXtra Device Port (XDP)
Each extension jack in the system supports the connection of a digital proprietary telephone /
console and a single line device. The two devices per jack have different extension numbers
and are treated as two completely different extensions.
Parallelled Telephone Connection
Every jack in the system also supports the parallel connection of a proprietary telephone and a
single line device. They share the same extension number and are considered by the system to
be one extension.
Super Hybrid System
This system supports the connection of digital and analogue proprietary telephones, consoles
and single line devices such as single line telephones, fax machines, and data terminals.
KX-TD816 KX-TD1232 KX-TD1232 x 2
16 (XDP* : 32) 32 (XDP: 64) 64 (XDP: 128)
Extension 12
PT & SLT*
6 BRI (12 ch) 6 BRI (12 ch) 12 BRI (24 ch)ISDN telephone
81224
Outside
Line
Analogue
4 BRI (8 ch) 6 BRI (12 ch) 12 BRI (24 ch)
Basic Rate
Interface (BRI)
Primary Rate
Interface (PRI) 1 PRI (30 ch) 1 PRI (30 ch)
* Proprietary telephone and single line telephone
* EXtra Device Port
1
2
E1 1 E1 (30 ch) 1 E1 (30 ch)

1.1 System Highlights
System Outline 15
System Connection*1
With the addition of the optional System Inter Connection Card, two Digital Super Hybrid
Systems can be connected together to double the capacity of the system. The two systems
function as one, therefore, some functions such as paging and music-on-hold are duplicated.
ISDN Line Service
The system can manage a call received from the ISDN line by point-to-point or point-to-multi-
point configuration. To use this service, an optional unit is required.
TIE Line Service
A TIE line is a privately leased communication line between two or more PBXs, which
provides cost effective communications between company at different locations. To use this
service, an optional unit is required.
E1 Line Service
An E1 line is at the bottom of the digital transmission hierarchy. The E1 line contains 30 voice
channels. Voice is digitised by Pulse Code Modulation. To use this service, an optional unit is
required.
*1 Available for the KX-TD1232 only.

1.2 Basic System Construction
16 SystemOutline
1.2 Basic System Construction
1.2.1 Basic System Construction
The KX-TD816 Digital Super Hybrid System has a basic capacity of four outside lines and
eight extensions, and the KX-TD1232 has eight outside lines and 16 extensions. They are
capable of supporting Panasonic digital and analogue proprietary telephones, consoles and
single line devices such as single line telephones and fax machines.
To expand its capabilities the system can be equipped with optional components or customer-
supplied peripherals such as external speakers and external music sources (e.g. radios).
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Panasonic
D816
DIGITAL SUPER HYBRID SYSTEM

1.2 Basic System Construction
System Outline 17
1.2.2 System Connection Diagram
KX-TD816
Panasonic
D816
DIGITAL SUPER HYBRID SYSTEM
Panasonic Panasonic
Doorphone 1
Doorphone KX-T30865
External Music Source
Amplifier
Printer for SMDR or Personal Computer for System Programming
Battery Adaptor
KX-A46
To AC Outlet
Two car batteries, connected in series
(Consisting of two 12 VDC)
Speaker
Doorphone 2 Door Opener 1 Door Opener 2
: Needs optional unit, card or adaptor.

1.2 Basic System Construction
18 SystemOutline
Note
• It is recommended that extension of jack 1 is a display proprietary telephone.
• Parallel connection of telephones is possible. Referto Section 2.3.3 Parallelled Telephone
Connection.
Panasonic
Panasonic
KX-T7400 series digital
proprietary telephones
Digital DSS consoles
(KX-T7440 / KX-T7441 /
KX-T7240)
KX-T7200 series digital
proprietary telephones
(two pair)
Data Terminal
Single Line Telephone
Cordless Phone
(one pair)
(two pair)
KX-T7040 DSS console
(two pair)
(two
pair)
(one
pair)
(one
pair)
(one
pair)
(one
pair)
KX-T7000 series analogue
proprietary telephones
(two
pair)
(two
pair)
KX-T7130 analogue
proprietary telephone
Telephone Answering
Machine with Facsimile
Voice Processing System
SLT Message
Waiting Lamp
Adaptor Unit
KX-TD194
: Needs optional unit, card or adaptor.
(Lightning Protectors)
to outside lines 1 through 4 (initial)
to outside lines 5 through 8 (additional)
8 Outside Lines
16 Extensions (8 extensions – initial, 8 extensions – additional )
D816
DEGITAL SUPER HYBRID SYSTEM
Panasonic

1.2 Basic System Construction
System Outline 19
KX-TD1232
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Panasonic Panasonic
Doorphone 1
Doorphone KX-T30865
External Music Source 1
Amplifier
Printer for SMDR or Personal Computer for System Programming
Battery Adaptor
KX-A46
To AC Outlet
Two car batteries, connected in series
(Consisting of two 12 VDC)
Speaker 1
Amplifier Speaker 2
External Music Source 2
Doorphone 2 Door Opener 1 Door Opener 2
: Needs optional unit, card or adaptor.

1.2 Basic System Construction
20 SystemOutline
Note
• It is recommended that extension of jack 1 is a display proprietary telephone.
• Parallel connection of telephones is possible. Referto Section 2.3.3 Parallelled Telephone
Connection.
Panasonic
Panasonic
KX-T7400 series digital
proprietary telephones
Digital DSS consoles
(KX-T7440 / KX-T7441 /
KX-T7240)
KX-T7200 series digital
proprietary telephones
(two pair)
Data Terminal
Single Line Telephone
(Lightning Protectors)
to outside lines 1 through 8 (initial)
to outside lines 9 through 54 (additional)
38 Outside Lines
Basic – 32 extensions (16 extensions – initial, 16 extensions – additional )
System Connection – 64 extensions (32 extensions – initial, 32 extensions – additional )
Cordless Phone
(one pair)
(two pair)
KX-T7040 DSS console
(two pair)
(two
pair)
(one
pair)
(one
pair)
(one
pair)
(one
pair)
KX-T7000 series analogue
proprietary telephones
(two
pair)
(three
pair)
KX-T7130 analogue
proprietary telephone
Telephone Answering
Machine with Facsimile
Voice Processing System
SLT Message
Waiting Lamp
Adaptor Unit
KX-TD194
D1232
DEGITAL SUPER HYBRID SYSTEM
Panasonic
: Needs optional unit, card or adaptor.