Panasonic 7600 Series User manual

TELEPHONE USER GUIDE
PLACING AN INTERCOM CALL
1) Lift the handset.
2) Press the room you wish to intercom.
3) Speak and the person will respond hands-free.
PLACING A CALL ON HOLD
1) While on a call press the HOLD button.
2) The call can be taken off of hold by pressing the line button.
INCREASING / DECREASING VOLUME
1) Press the up or down arrow on the navigator button (mouse
pad device with “enter” button) while using the phone.
2) During a speakerphone call the speaker volume will alter.
3) During a handset call the handset volume will alter.
RAISING / LOWERING RINGER LEVEL
1) Press the softkey button below the word RING on the display.
2) Press the up or down arrow on the navigator button (mouse
pad device with “enter” button).
3) Volume will increase or decrease. Ringer can be turned off
by this method as well. Display will read RINGOFF when the
ringer is disabled.
MAKING AN ALL-PAGE
1) Lift the handset.
2) Press the INTERCOM button.
3) Press the button labeled ALL-PAGE.
4) You will now page over all the telephones.
ANSWERING AN ALL-PAGE
1) While a person is making an all-page:
2) Go to the phone and lift the handset.
3) Press the INTERCOM button.
4) Press the button labeled PAGE ANSWER.
REDIAL
1) Select a line.
2) Press the REDIAL button
3) The system will redial the last number dialed.

CONFERENCE (Panasonic System)
1) Make the first call.
2) Press the CONF button (do not press HOLD).
3) Make an additional phone call.
4) Press the CONF button.
5) Continue to add additional callers by repeating steps 2 - 4
6) Conference may include up to 8 parties.
EXITING CONFERENCE AND LEAVING PARTIES CONNECTED
1) While on conference call:
2) Press the CONF button.
3) Hang up handset.
4) Conferenced parties will remain connected to one another.
CONFERENCE (AT&T 3-Way Calling)
1) Make the first call.
2) Press the FLASH button. You will receive dial tone.
3) Call second person. When they answer, press FLASH again.
4) You and the two outside parties will be conferenced
Together. No additional parties may be added.
BARGING IN ON EXISTING CONVERSATION
1) While other person is on a telephone call:
2) Press the line button that they are speaking on (lit up red).
3) Press the button below the word “OVER” on the display.
4) You have now barged in on the call.
DO NOT DISTURB
1) Press the DND button.
2) DND button will light.
3) The phone will not ring on incoming calls or receive
intercom calls.
TURNING OFF DO NOT DISTURB
1) Press the DND button.
2) DND button will extinguish light.
3) The phones will return to normal ringing.
TO ANSWER CALL WAITING
1) While on a call press the FLASH button.
2) Speak with the other caller.
3) To return to the first caller press FLASH again.