Panasonic KX WP1050 User manual

Quick Start Guide
Wi-Fi Phone for Skype™
Executive Travel Set
Model No. KX-WP1050
Thank you for purchasing a Panasonic Wi-Fi Phone for Skype
Executive Travel Set.
Please read this Quick Start Guide before using the unit and save for future
reference.
For further details, please read the Operating Instructions included in the
CD-ROM.
The Operating Instructions are in PDF format. Please note that Adobe®
Reader® (6.0 or later) or Acrobat® Reader (5.0 or later) is required to view
the Operating Instructions.
No emergency calls: Skype is not a replacement for your ordinary
telephone and cannot be used for emergency calling.
PQQW15391YA SJ1006SM1047
We recommend keeping a record of the following information for
future reference.
Date of purchase
Serial No.
(found on the bottom of the base unit)
MAC address
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd.,
and may be reproduced for internal use only. All other reproduction, in
whole or in part, is prohibited without the written consent of Panasonic
Communications Co., Ltd.
© 2006 Panasonic Communications Co., Ltd. All Rights Reserved.
Contents
1. Packing the accessories ..........2
2. Installing the base unit .............2
3. Setting up the base unit ...........6
4. Setting up the handset .............8
5. Menus .................................... 11
6. Managing contacts .................13
7. Making / answering calls ........15
8. Troubleshooting ......................15
This product is designed
for use in the following
countries:
USA, Canada, Japan, UK,
Germany, France (indoor use)

2 3
1
Select the appropriate installation procedure according to where you want
to use the unit.
– In a hotel room: Follow the instructions 2-A on this page.
– At home: Follow the instructions 2-B on page 4.
Packing the accessories
2Installing the base unit
Ô
Included accessories
No. Accessory item Quantity
1
Ethernet cable (approx. 0.5 m [1.6 feet]) 1
2
Charge cable (approx. 0.5 m [1.6 feet]) 1
3
AC cord*1 (approx. 1.7 m [5.6 feet]) 1
4
AC adaptor for base unit (approx. 1.9 m [6.4 feet]) 1
5
Base unit (Wireless travel router) 1
6
Handset stand 1
7
Battery 1
8
Handset 1
9
Carrying case 1
j
Quick Start Guide (English and Spanish) 2
k
CD-ROM (Operating Instructions are included.) 1
l
Wireless LAN sticker*21
*1 The included AC cord is compatible with a power source up to 125 V AC. You
might need a separate AC cord when you use this product in other countries.
For UK: Order No. PSJA1106Z
For Germany and France: Order No. PFJA02A006Z
*2 Your base unit’s default network name (SSID) and network key for wireless
connection are printed. As this information is important for the base unit
settings, save this sticker in a safe place.
Trademarks:
L�Microsoft, Windows and Internet Explorer are either registered
trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
L�Skype, SkypeIn, SkypeOut and the S logo are trademarks of Skype
Limited.
L�Wi-Fi is a trademark of the Wi-Fi Alliance.
1
2
34
5
67
9
8
j
L�Adobe, Acrobat and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
L�Mozilla and Firefox are registered trademarks of the Mozilla Foundation.
L�All other trademarks identified herein are the property of their respective
owners.
2-A While you are in a hotel room
You can use the handset while you are traveling by accessing the Internet
from a hotel room.
The hotel you are staying in may give you specific instructions as to what
Internet connection mode you should select. In that case, follow their
instructions. Otherwise, you are suggested to use [Default Profile] when
you set the connection mode in Initialization Setup (3-A on page 6).
k
l
Note:
L�Do not include the CD-ROM when packing the
accessories in the carrying case.
L�Charge the battery for 6 hours before initial use.
Note:
L�You need to connect a computer to the base unit in order to set up the
base unit.
1
2
3
4
AC cord
AC adaptor
To AC outlet Ethernet port
(RJ45 jack)
Internet
Computer
Base unit
Mode selector
Ethernet cable (included)
Ethernet cable
(not included)
1 Switch the Mode selector to “HOTEL”.
2 Connect the included Ethernet cable to the “WAN”
port on the base unit and the Ethernet port (RJ45
jack) in the hotel room.
L�If you cannot find the Ethernet port (RJ45 jack) in
the hotel room, ask the hotel front desk. In some
hotels, the wireless Internet connection service
may be available by using a wireless Ethernet
bridge prepared by the hotel.
3 Connect a separate Ethernet cable to the “LAN”
port on the base unit and the Ethernet (LAN) port
on your computer.
4 Connect the included AC adaptor to the power port
and an AC outlet.
L�The WAN indicator on the base unit lights in
steady green or amber.
Note:
L�Use only the included Panasonic AC adaptor
PQWEWP1050 and AC cord PQJA10188Z.
L�You need a separate AC cord when you use
this unit in UK, Germany and France.
OR
Wireless Ethernet bridge

4 5
2. Installing the base unit
Ô
2-B While you are at home
The base unit has 2 modes of operation for use at home: AP (Bridge) mode
and Router mode.
– AP (Bridge) mode is designed for the case when you have an existing
router or modem (cable or DSL) with a built-in router.
– Router mode is designed for the case when you only have a standard
cable or DSL modem.
With an EXISTING ROUTER or MODEM with a built-in
ROUTER
<AP (Bridge) mode>
If you install the base unit with your existing router or modem with a
built-in router, the base unit should be set to AP (Bridge) mode. Select
[AP (Bridge)] for your connection mode in Initialization Setup (3-A on
page 6). In AP (Bridge) mode, the base unit connects wireless devices to
one another and to the LAN, and allows wireless devices to use a DHCP
server on the LAN. In most cases, routers are equipped with the function
as the DHCP server.
1
2
4
5
AC cord
AC adaptor
To AC outlet
Existing router
Internet
Computer
Base unit
Mode selector
Ethernet cable
(included)
Ethernet cable (not included)
1 Switch the Mode selector to “HOME”.
2 Turn off your computer properly. Unplug any cable connecting your
existing router (or modem with a built-in router) to your computer.
However, your existing router (or modem with a built-in router) needs
to remain connected to your cable or DSL modem.
3 Connect the included Ethernet cable to the “WAN” port on the base
unit and an unused Ethernet (LAN) port on your existing router (or
modem with a built-in router).
4 Connect a separate Ethernet cable to the “LAN” port on the base
unit and the Ethernet (LAN) port on your computer.
5 Connect the included AC adaptor to the power port and an AC outlet.
L�The WAN indicator on the base unit lights in steady green or
amber.
Note:
L�Use only the included Panasonic AC adaptor PQWEWP1050 and AC
cord PQJA10188Z.
L�You need a separate AC cord when you use this unit in UK, Germany
and France.
3
Cable or DSL modem
With a MODEM ONLY
<Router mode>
If you install the base unit with a modem only, the base unit should be set
to Router mode. In Router mode, the base unit assigns IP addresses to
network devices (including wireless devices) as a DHCP server. It also
protects the network devices from being directly exposed to the WAN. For
your connection mode, select [DHCP], [Static] or [PPPoE] in Initialization
Setup (3-A on page 6).
1
2
4
6
AC cord
AC adaptor
To AC outlet
Internet
Computer
Base unit
Mode selector
Ethernet cable (included)
Ethernet cable (not included)
1 Switch the Mode selector to “HOME”.
2 Turn off your computer properly and unplug your cable or DSL
modem’s power cord. Unplug any cable connecting the modem to
your computer. However, the modem needs to remain connected to
the Internet.
3 Connect the included Ethernet cable to the “WAN” port on the base
unit and the Ethernet (LAN) port on the modem.
4 Connect a separate Ethernet cable to the “LAN” port on the base
unit and Ethernet (LAN) port on your computer.
5 Plug your modem’s power adaptor into an AC outlet.
L�Wait for your modem’s power light to stop flashing before you go
to the next step. (It may take a few minutes.)
6 Connect the included AC adaptor to the power port and an AC outlet.
L�The WAN indicator on the base unit lights in steady green or
amber.
Note:
L�Use only the included Panasonic AC adaptor PQWEWP1050 and AC
cord PQJA10188Z.
L�You need a separate AC cord when you use this unit in UK, Germany
and France.
3
Cable or
DSL modem
2,5

6 7
3-A Initialization Setup
When you log in the base unit for the first time, you must register the
network settings you use for HOME or HOTEL mode as a profile in
Initialization Setup using the Web browser on the computer you connected
to the base unit’s “LAN” port.
Important:
L�Required Web browser:
– Microsoft® Internet Explorer® 6.0 or later for Windows®
– Mozilla® Firefox® 1.5 or later for Windows
Operating tips:
[ ]: The words in the brackets indicate button names displayed on the
computer screen.
1 After the base unit installation (pages 2-5), turn on the computer you
connected to the base unit’s “LAN” port.
2 Open the Web browser. Enter http://192.168.102.1/ (the base unit’s
default IP address) or http://kxwpa.webpage in the address field of the
browser and press the ENTER key.
L�Initialization Setup starts. The Login User Name and Password page is
displayed.
L�If you have already set your user name and password, skip to step 4.
If “Initialization Setup” window is not displayed:
L�Check the network setting on your computer. It is necessary to obtain
an IP address of your computer automatically from a DHCP server.
See “Obtain an IP address automatically on your computer” in the
Operating Instructions included in the CD-ROM.
L�Sometimes it is necessary to set up your Web browser’s proxy server
to access the base unit. See “Changing the proxy server settings on
Web browser” in the Operating Instructions included in the CD-ROM.
3 Enter the desired user name and password, then click [Save].
Important:
L�Please keep your user name and password secure.
[User Name] L�The user name and password can contain 6 to
15 alphanumeric characters.
L�The following cannot be used:
[ ” ], [ ’ ], [&], [<], [>], [ : ], [(space)]
L�User name and password must be different from
each other.
L�User name and password are case-sensitive.
[Password]
[Retype Password] L�Enter the password again to verify.
L�The base unit begins restarting and a prompt
screen with fields for your user name and
password is displayed.
4 Enter the user name and password set in step 3. Then click [OK].
L�Top Menu is displayed.
5 Click [Network Connection] on the Top Menu.
L�The current Internet connection settings and information of the
wireless connection are displayed.
6 Click [New Profile] under the New Profile heading.
L�If you have no specific instructions for the Internet connection from the
hotel, you can use [Default Profile] for an easy setup. Ask the hotel
front desk for details. Select [Default Profile] then skip to step 10.
7 Select the desired connection mode used in the current mode (HOME or
HOTEL), then click [Next>].
�When the Mode selector is set to “HOME”:
L�Internet connection modes vary according to the Internet service
provider. Select a connection mode referring to the Internet service
provider’s setup information.
L�Select [DHCP], [Static] or [PPPoE] if the base unit is installed in
Router mode.
Select [AP (Bridge)] if the base unit is installed in AP (Bridge) mode.
[DHCP] L�Allows the base unit to receive an IP address
automatically from a DHCP server. This connection
mode is usually required for use with cable modems.
[Static] L�Allows the base unit to assign a specific IP address.
[PPPoE] L�Allows the base unit to receive an IP address from
a PPPoE server. This connection mode is usually
required for use with DSL modems.
[AP (Bridge)] L�Allows the base unit to work as an access point when
you have a router at home.
When the Mode selector is set to “HOTEL”:
L�Select the conection mode as specific instructions for the Internet
connection from the hotel.
L�[AP (Bridge)] is not available in HOTEL mode.
[DHCP] L�Allows the base unit to receive an IP address
automatically from a DHCP server. DHCP
configuration is often used in hotel rooms.
[Static] L�Allows the base unit to assign a specific IP address.
[PPPoE] L�Allows the base unit to receive an IP address from a
PPPoE server.
L�A screen with fields for configuring the connection mode you select in
this step is displayed.
3Setting up the base unit
Ô

8 9
3. Setting up the base unit
Example: When you select [DHCP]
8 Configure the settings referring to the Internet service provider’s setup
information (or instructions provided by the hotel), then click [Next>].
L�If your Internet service provider or the hotel you are staying in does not
specify any of the settings, leave the data fields blank except for MTU
entry.
L�The Save Settings page is displayed.
9 Confirm the settings you are about to save, then click [Save].
L�The setting that you have just configured are saved as profile No. 1
(HOME mode) or No. 2 (HOTEL mode) according to the position of
the Mode selector. The profile is automatically named “Automatic
generation” and saved.
Ô
10 Click [Restart].
L�The base unit restarts with the Internet connection profile you have just
saved. When the WAN indicator lights in steady green, the Initialization
Setup is complete.
L�In AP (Bridge) mode, you need to restart your computer.
11 Try to access a website in order to confirm the Internet connection
setting. Enter http://www.panasonic.com in the address field of the
browser and press the ENTER key.
L�If the Panasonic website is displayed, you have successfully
connected to the Internet.
L�If you are in a hotel room, an authorization for the Internet access may
be required. Ask the hotel front desk and follow their instructions.
3-B Mode selector
Once you have registered the profiles for HOME and HOTEL modes in
Initialization Setup, you can easily select the mode by switching the Mode
selector to “HOME” or “HOTEL” before turning on the base unit.
Mode selector
3-C Using your computer on a wireless LAN
The 15 character device-specific network name (SSID) and 13
alphanumeric character 128 bit encryption network key (WEP) are set to
factory defaults. These factory default setting values are shown on the
included Wireless LAN sticker. If you use your computer on a wireless
LAN, use the values on the sticker to set the wireless LAN configuration
on your computer. To set your computer to be used on a wireless LAN, see
the manual for the computer you use.
Note:
L�To use your computer on a wireless LAN, a wireless LAN card needs to
be installed on your computer.
4Setting up the handset
Ô
4-A Battery installation
1 Press the notch of the handset cover firmly, and
slide it in the direction of the arrow.
2 Insert the battery ( A ), and press it down until
it snaps into position ( B ). Then close the
handset cover ( C , D ).
AD
B
C
Important:
L�Use only the rechargeable Panasonic battery.
Battery charge
Connect the included charge cable to the CHARGE port of the handset.
Connect the other end to the CHARGE port of the base unit that is
connected to the power supply.
Charge the battery for 6 hours before initial use.
L�While charging, the charge indicator on the handset lights in red. When
the battery is fully charged, the indicator goes out.
To AC outlet
Charge cable
CHARGE ports
Charge indicator
Handset stand

10
4. Setting up the handset
Ô Ô
4-B Power on / Sign in to Skype
To use the handset, you need a Skype account and need to connect to a
network and sign in to Skype. If you do not have a Skype account, you can
create it using the handset.
Operating tips:
{ }: The words in the brackets indicate button names/soft key names on
the handset.
“ ”: The words in quotations indicate menu items displayed on the handset
screen.
Starting up for the first time
Perform the following procedures after installing and setting up the base
unit (pages 2-9).
1 Press and hold {}} for 2 seconds to turn on the handset.
2 Read the entire Skype agreement. i {Yes}
L�The handset starts searching for available networks
in range, then the handset automatically connects to
the base unit.
L�If the network list is displayed, select the desired
network and press {Connect}.
If you already have a Skype account:
3 After a network connection is complete, select “Sign in to Skype”.
i {Select}
4 Enter your Skype name (see section 6-C on page 14 for information on
entering text). i {OK} i Enter your password. i {OK}
5 Press {Yes} or {No} to decide whether to sign in automatically from the
next time on.
LThe �Idle screen appears.
If you do not have a Skype account:
3 “Create new account” i {Select}
4 Enter a Skype name (see section 6-C on page 14 for information on
entering text). i {OK} i Enter a password. i {OK} i Re-enter
the password. i {OK}
L�Skype names can be 6 – 32 characters, numbers, and punctuation
marks. You cannot use spaces or start your name with a number or
punctuation mark. If the name is already in use, you will be prompted
to try another name. Password can be 4 – 20 characters. You can
use any mix of upper- and lowercase characters, numbers, and
punctuation marks. You cannot use spaces, start your name with a
number or punctuation mark, or use your Skype name as a password.
5 Read the entire Skype agreement. i {Yes}
L�The Idle screen appears.
Handset status icons
Current time
Skype online status
Skype credit balance
Soft key functions
<Idle screen>
Note:
L�In step 2, you can connect to specific networks that require you to select
security type and enter the network key.
L�In step 2, you can also connect to open networks. When connecting to
open networks, the confirmation message appears.
To turn off the handset:
Press and hold {}} for 2 seconds.

11 12
4. Setting up the handset
Ô
Starting up for the second time
1 Press and hold {}} for 2 seconds to turn on the handset.
L�The handset starts searching for available networks. If any networks
you normally use are already in your preferred networks list, the
handset automatically connects to one of the networks in the list.
2 After a network connection is complete, select “Sign in to Skype”.
i {Select}
L�If the handset is set to “Auto sign in” and you did not sign out
the previous time, the Idle screen appears instead of the “Sign in”
screen and steps 3 and 4 are skipped.
3 Enter your Skype name. i {OK} i Enter your password. i {OK}
4 Press {Yes} or {No} to decide whether to sign in automatically from the
next time on.
L�The Idle screen appears.
4-C Setting the time and date
Set the correct time and date before you start using the handset.
L�Changing “Time zone” and “Daylight saving” sets the displayed
time forward or backward. When you set the time and date for the first
time, set the time after all the other time and date settings.
5-A Main menu
Skype’s Main menu provides 7 menus as shown below.
1 {Menu} (middle soft key)
2 Select the desired menu. i {Select}
Contacts*1View a list of Skype and SkypeOut™ contacts with their
current Skype status.
History*1View history of missed calls, incoming calls, outgoing
calls, Voicemails and authorization requests.
Status*1Define your personal Skype settings.
L�Change status: Change your Skype online status.
L�My profile: Change your profile details.
L�Sign out: Sign out of Skype.
Add contact*1
Add Skype and SkypeOut contacts to your contact list.
Search*1Search for Skype contacts over the Internet.
Services*1View Skype credit, SkypeIn™ and Voicemail information.
Settings Configure handset settings.
L�Network: Search for networks, manage preferred
networks list, and set auto-connection to open networks.
L�General: Change your password*1, set auto sign-in*1,
update software, and reset handset settings.
L�Call divert*1: Set call forwarding, Voicemail and
welcome message.
L�Privacy*1: Restrict incoming calls to those you specify.
L�Tones: Set the ringer type, tone, volume, notification
tone, Keypad tone and out of service tone.
L�Time and Date: Set the time zone, daylight saving,
time, time format, date and date format.
L�Blocked users*1: View blocked users list and
unblock users you desire.
L�Phone settings: Register the handset to the base
unit and adjust the brightness of the handset display.
L�Information: View handset information such as
product ID, software/firmware versions and MAC address.
L�Advanced: Set the notification for software update and
set network proxy.
*1 Available only when you are signed in to Skype.
5Menus
1 {Menu} (middle soft key)
2 “Settings” i {Select}
3 “Time and Date” i {Select}
4 Select the desired setting.
Time zone Select the desired item. i {Select}
Daylight saving Select “Standard” or “Daylight saving”. i
{Select}
Time Enter the current hour and minute (24-hour
clock/12-hour clock format) by selecting 2 digits
for each. For 12-hour clock, press {*} to select
“AM” or “PM”. i {OK}
Time format Select “24 hour clock” or “12 hour clock”.
i {Select}
The default is set to “12 hour clock”.
Date Enter the current month, day and year by
selecting 2 digits for month and day, and 4 digits
for year. i {OK}
Date format Select the desired format. i {Select}
Note:
L�If you make a mistake when entering the time and date, press {<} or {>}
to move the cursor, then make the correction.
5-B Idle mode option screen
1 {Options}
2 Select the desired menu. i {Select}
L�Functions available in the menu depend on whether
you are signed in to Skype.
Silent*1Set the silent mode to on.
Sounds on*1Set the silent mode to off.
Change status*2 *3Change your Skype online status.
My profile*2Change your Skype profile details.
Sign out*2Sign out of Skype.
View networks View a list of networks found within range.
Network details View network connection information.
*1 Either is displayed according to the current silent mode setting.
*2 Available only when you are signed in to Skype.
*3 You can also access to the “Change status” menu by pressing {^}
while in the Idle screen.

13 14
6-A Adding contacts
You can add up to 500 contacts to your contact list. If you have an existing
Skype account, your contact list is automatically downloaded when you
sign in. If you are new to Skype and have just created an account, your
contact list will be empty. You will need to add contacts to your list.
Adding Skype contacts
1 {Menu} (middle soft key)
2 “Add contact” i {Select}
3 “Skype” i {OK}
4 Enter the Skype name (max. 32 characters; see
section 6-C on page 14 for information on entering
text). i {OK}
5 Press {Yes} to add the contact to your list and to authorize the contact
to see when you are online.
L�Press {No} to add the contact without the authorization.
L�If you previously sent an authorization request to the same user and
the user accepted your request, skip steps 6 and 7, then press {OK}.
6 Press {OK} to send an authorization request to the added contact.
7 Enter text to send with the request (max. 200 characters). i {OK}
Note:
L�You can also search and add Skype contacts from the “Search” menu
(6-B on this page).
Adding SkypeOut numbers
You can add non-Skype (SkypeOut) numbers to your contact list. SkypeOut
numbers are listed with “ ” icon in your contact list.
1 {Menu} (middle soft key)
2 “Add contact” i {Select}
3 “SkypeOut number” i {OK}
4 “Contact’s name” i {Select}
5 Enter the name if you desire (max. 50 characters; see section 6-C on
page 14 for information on entering text). i {OK}
6 “Phone number” i {Select}
7 Enter the phone number (max. 20 digits) in the following way (even for
local calls):
“country code” + “area code” + “local phone number” i {OK}
Example (using the country code “1” for calling USA): + 1 555 321 5555
L�“+” (international prefix) is automatically added.
L�For some countries, you may need to exclude “0” at the beginning of
the area code.
L�To correct a digit, press {CLEAR}.
8 {Save}
6-B Searching for Skype contacts
You can search the Skype directory for your desired Skype contacts over
the Internet so that you can call, add to your contact list, or view the profiles
of the contacts.
1 {Menu} (middle soft key)
2 “Search” i {Select}
3 Enter the name (Skype name or full name) or E-mail address to search
for (max. 50 characters; see section 6-C on this page for information on
entering text). i {OK}
L�You can also search for a contact by entering a part of the name.
L�The contacts containing the entered characters are listed.
4 Select the desired Skype contact.
L�To view the contact’s profile, press {View}.
L�To call the contact, press {{} or {s}.
L�To access options, press {Options} and select the desired option. i
{Select}
More results View the next 20 results.
Previous results View the previous 20 results.
Search again Search again with another keyword.
Add to contacts Add the contact to your contact list.
View profile View the contact’s profile.
6-C Text entry
The dial keys are used to enter characters and numbers. Each dial key
has multiple characters assigned to it. Use the following character table for
reference when you enter characters or numbers.
Character table
Key
Text entry screen
Phone No.
entry screen
Lowercase
(abc)
Uppercase
(ABC)
Numeric
(123)
Hexadecimal
(HEX)
Numeric
(123)
{1}1 . , ? ! - _ @ *11 1 1
{2}a b c 2 A B C 2 2 2 a b c 2
{3}d e f 3 D E F 3 3 3 d e f 3
{4}g h i 4 G H I 4 4 4 4
{5}j k l 5 J K L 5 5 5 5
{6}m n o 6 M N O 6 6 6 6
{7}p q r s 7 P Q R S 7 7 7 7
{8}t u v 8 T U V 8 8 8 8
{9}w x y z 9 W X Y Z 9 9 9 9
{0}Space*10 Space*10 0
+ ( Press
and hold
)*1
0 0
+ (Press
and hold)
{*} Change character entry mode *
{#} Line feed*1#
*1 Valid depending on the text entry screen.
Basic operation
L�To move the cursor, press {<} or {>}.
L�To enter another character located on the same dial key, leave for a
second after pressing the dial key, so that the cursor automatically moves
to the right.
L�To change the character entry mode, press {*} repeatedly to shift
through Lowercase (abc), Uppercase (ABC), Numeric (123) and
Hexadecimal (HEX) modes. (Changing the character entry mode is
invalid when you enter phone numbers.)
L�Press {*} to switch between uppercase and lowercase just after entering
a character.
L�To enter symbols while in the text entry screen, press {Symbol} and
select the desired symbol, then press {Insert}.
(The available symbols differ depending on the text entry screen.)
L�To edit/correct a mistake, press {<} or {>} to move the cursor to the
character or number you want to erase, then press {CLEAR}. Enter the
appropriate character or number.
6Managing contacts

15 16
For other troubleshooting, please see the Operating Instructions included
in the CD-ROM. You can also get up-to-date support information from our
website: http://www.panasonic.com/help
Problem Cause/solution
The unit does not work. • Make sure the battery is installed correctly and
fully charged (pages 8-9).
• Check the connections (pages 2-5).
• Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
• The handset has not been registered to the
base unit. Register the handset (refer to the
Operating Instructions included in the CD-
ROM).
The Top menu of
the base unit is not
displayed.
• Confirm the new IP address by using the
handset. Select “Network details” in the
Idle mode option screen (5-B on page 11).
Enter the displayed IP address in the address
field of the browser after http://.
7Making / answering calls
7-A Making Skype calls
Using the contact list
1 {CONTACTS}
2 Select the desired Skype contact. i {{}
L�You can search for a contact by entering a part of the display name.
Press the dial keys to enter the name, then press {^} or {V} to select
the desired contact from the candidates.
3 When you are finished talking, press {}}.
Note:
L�In step 1, you can also press {Menu} (middle soft key). i “Contacts”
i {Select}
Using History
The following events are logged in the “History” menu: 50 missed calls,
20 incoming calls, 20 outgoing calls, 100 Voicemails and 20 authorization
requests.
1 {Menu} (middle soft key)
2 “History” i {Select}
3 Select the desired list. i {Select}
4 Select the desired log. i {{}
L�If you select a Voicemail log, press {Options}.
i “Call” i {Select}
5 When you are finished talking, press {}}.
Note:
L�In step 1, you can also press {{} to access the outgoing calls list. i
Press {<} or {>} to switch between the outgoing calls, incoming calls
and missed calls lists, then skip to step 4.
7-B Making regular phone calls (SkypeOut)
SkypeOut is a way to make calls from Skype to persons who use landlines
or mobile phones. You must have Skype credit to make SkypeOut calls.
For more information, please visit http://www.skype.com/
1 Enter the phone number in the following way (even for local calls):
“country code” + “area code” + “local phone number”
Example (using the country code “1” for calling USA):
+ 1 555 321 5555
L�“+” (international prefix) is automatically added.
L�For some countries, you may need to exclude “0” at the beginning of
the area code.
L�To correct a digit, press {CLEAR}.
2 {{}
3 When you are finished talking, press {}}.
7-C Answering calls
1 Press {{} or {s}.
2 When you are finished talking, press {}}.
To reject the call:
While the handset is ringing, press {}}.
Temporary ringer off:
While the handset is ringing, press {Silent}.
7-D Useful features during a call
Feature Operation
Using the
speakerphone
Press {s} during a call.
L�To switch to the receiver, press {s} or {{}.
Reciver/Speaker
volume
Press {^} or {V} repeatedly during a call.
Hold 1 Press {Hold} during a call.
2 To release hold, press {Resume} or {{}.
Mute 1 Press {MUTE} during a call.
2 To return to the conversation, press {MUTE} or {{}.
Call waiting 1 Press {Answer} to answer the 2nd call after the call
waiting tone.
2 To switch between calls, press {Switch}.
3 To resume conversation, press {Resume}.
8Troubleshooting
Problem Cause/solution
I cannot make a call. • Confirm the Ethernet cable is properly
connected (pages 2-5).
• If you cannot access Internet Web pages using
your computer, check to see if your Internet
service provider is having connection problems
in your area.
• Double-check your device connections against
the installation instructions (pages 2-5). The
order in which you turn on the devices is very
important.
• Many installation issues can be resolved by
resetting all the equipment. First, power down
your modem, base unit, router (if you have
one), and computer. Then, turn the devices
back on one at a time in this order: modem,
router, base unit, computer. If you use the
PPPoE connection, it may take a few minutes
or more to reset the PPPoE connection.