Panasonic KX-TGA230B User manual

– 1 –
For assistance, please call: 1-800-211-PANA(7262)
PQQX13421 A-AK S0702-1072
Installation Manual
PLEASE READ BEFORE USE AND SAVE.
KX-TGA230B/KX-TGA230W is the optional cor less han set for the
KX-TG2352W/KX-TG2382B.
This installation manual only escribes the steps necessary to start up the
han set. Please rea the KX-TG2352W/KX-TG2382B operating instructions for
further etails.
2.4GHz Expandable Cordless Handset
Model No. KX-TGA230B/KX-TGA230W
Charger Unit ...................................one
Charger Or er No. PQLV30017ZB (Black)
Or er No. PQLV30017ZW (White)
AC A aptor Or er No. PQLV2Z ( PQLV2 )
Han set Cover................................one
Or er No. PQKK10131Z3 (Black)
Or er No. PQKK10131Z2 (White)
Battery...............................one
Or er No. N4HHGMB00001
(HHR-P103)
Belt Clip.............................one
Or er No. PQKE10352Z3 (Black)
Or er No. PQKE10352Z2 (White)
Accessories (inclu e ) For extra or ers, call 1-800-332-5368.
Installing the battery
Insert the battery into the han set as shown, matching the correct polarity (#). Press
the battery own until it fits securely into the compartment ($). Close the cover.
Installation!
Connecting the AC adaptor
•USE ONLY WITH Panasonic AC ADAPTOR PQLV2 (Or er No. PQLV2Z).
•The AC a aptor must remain connecte at all times. (It is normal for the a aptor to feel
warm uring use.)
1
2
AC A aptor
Power Outlet
(AC 120 V, 60 Hz)

– 2 –
•Clean the charge contacts of the handset and the charger with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or high
humidity. Otherwise the battery may not charge properly.
Handset battery information
After your Panasonic battery is fully charge :
Charging the battery
Place the han set on the charger an charge for
about 15 hours before initial use.
•The CHARGE in icator will light, a beep will soun
an “Charging” will be isplaye .
•Recharge the battery when:
– “Recharge” is isplaye ,
– “ ” flashes on the isplay, or
– the han set beeps intermittently while it is in use.
•If the battery has been ischarge , the han set will
isplay “Charge for 15h” when you place the
han set on the charger. The han set will not work.
Keep charging until fully charge .
Belt Clip!
You can hang the han set on your belt or pocket using the belt clip.
To attach the belt clip To remove the belt clip
CHARGE
In icator
Charge Contacts
Operation Operating time
While in use (TALK)
While not in use (Stan by) Up to 4 hours Up to 7 ays

– 3 –
The han set isplay shows the instructions as shown
on the right.
1
Base unit:
Press HANDSET LOCATOR (ALL) until the
CHARGE in icator flashes.
2
Handset:
#Press á.
$Wait until a long beep soun s an the isplay
shows the registere number. The registration
will be then complete.
•The registere number “[1]” to “[3]” is shown on the top right of
the isplay.
•
You can stop registration by pressing (OFF) on the han set an
pressing HANDSET LOCATOR (ALL) on the base unit.
•After you register the han set to the base unit, please confirm that the other (first one an
secon one) pre-registere han sets isplay “Talk” by pressing . If one of the
han sets oes not isplay “Talk”, re-register that han set to the base unit.
Ex. Extension number 3
Registration!
This cor less han set must be registere at the KX-TG2352W/KX-TG2382B
base unit. The han set will be assigne the extension number at registration.
Only one han set can be registere at a time.
Make sure the base unit and the other handsets are not being used.
Registration must be completed within 1 minute.
á
•The illustration of the base unit is the KX-TG2352W.
To cancel the han set registration, please see the KX-TG2352W/KX-TG2382B
Operating Instructions.
For assistance, please call: 1-800-211-PANA(7262)
CHARGE In icator
Press [ALL] on
base for 3 sec,
then press [
H ].
Handset
Registering
Handset [3]
Registered
[3]
HANDSET LOCATOR (ALL)

– 4 –
Optional Headset!
Plugging a hea set into the han set allows a han s-free phone conversation.
Please use only the Panasonic KX-TCA88 hea set.
To or er, call the accessories telephone number on page 1.
Connecting the headset
Open the hea set jack cover, an connect the hea set to the hea set jack as
shown.
H
Hea set Jack
Wall Mounting!
The charger can be wall mounte . Connect the AC a aptor. Install screws using
the wall template below. Mount the charger (#). Sli e it own ($) then sli e
own to the right (%) until it is secure .
$
#
%
Wall
Template
2.45 cm
(15⁄16")
Screws
To Power
Outlet
2.45 cm
(
15
⁄
16
")

For assistance, please call: 1-800-211-PANA(7262)
– 5 –
FCC and Other Infor ation!
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS
TO EMERGENCY NUMBERS:
1) Remain on the line an briefly explain to the ispatcher the reason for the call.
2) Perform such activities in the off-peak hours, such as early morning or late evenings.
This evice complies with Part 15 of the FCC Rules. Operation is subject to the following
two con itions: (1) This evice may not cause harmful interference, an (2) this evice
must accept any interference receive , inclu ing interference that may cause un esire
operation.
Privacy of communications may not be ensure when using this phone.
CAUTION:
Any changes or mo ifications not expressly approve by the party responsible for
compliance coul voi the user’s authority to operate this evice.
Note:
This equipment has been teste an foun to comply with the limits for a Class B igital
evice, pursuant to Part 15 of the FCC Rules. These limits are esigne to provi e
reasonable protection against harmful interference in a resi ential installation. This
equipment generates, uses, an can ra iate ra io frequency energy an , if not installe
an use in accor ance with the instructions, may cause harmful interference to ra io
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment oes cause harmful interference to ra io or
television reception, which can be etermine by turning the equipment off an on, the
user is encourage to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment an receiver.
— Connect the equipment into an outlet on a circuit ifferent from that to which the
receiver is connecte .
— Consult the ealer or an experience ra io/TV technician for help.
Operating near 2.4GHz electrical appliances may cause interference. Move away from
the electrical appliances.
CAUTION:
To comply with FCC RF exposure requirements, the han set shoul be carrie with the
specific belt-clip provi e for the han set to ensure compliance. Other non-teste belt-
clips or similar bo y-worn accessories may not comply, therefore, shoul be avoi e .
This equipment is hearing ai compatible as efine by the FCC in 47 CFR Section
68.316.
When you hol the phone to your ear, noise might be hear in your Hearing Ai . Some
Hearing Ai s are not a equately shiel e from external RF (ra io frequency) energy. If
noise occurs, use an optional hea set accessory or the speakerphone option (if
applicable) when using this phone. Consult with your au iologist or Hearing Ai
manufacturer about the availability of Hearing Ai s which provi e a equate shiel ing to
RF energy commonly emitte by igital evices.

CAUTION:
To re uce the risk of fire or injury to persons, rea an follow these instructions.
1.Use only the battery(ies) specifie .
2.Do not ispose of the battery(ies) in a fire. They may explo e. Check with local waste
management co es for special isposal instructions.
3.Do not open or mutilate the battery(ies). Release electrolyte is corrosive an may
cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowe .
4.Exercise care in han ling batteries in or er not to short the battery to con uctive
materials such as rings, bracelets, an keys. The battery an /or con uctor may
overheat an cause burns.
5.Charge the battery(ies) provi e with or i entifie for use with this pro uct only in
accor ance with the instructions an limitations specifie in this manual.
A nickel metal hy ri e battery powers that is recyclable the
pro uct you have purchase .
Please call 1-800-8-BATTERY for information on how to
recycle this battery.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR ANY TYPE OF MOISTURE.
•The AC a aptor is use as the main isconnect evice, ensure that the AC
outlet is locate /installe near the unit an is easily accessible.
Panasonic World Wide Web address: http://www.panasonic.com
for customers in the USA or Puerto Rico
Panasonic’s e-mail a ress for customer inquiries:
consumerpro [email protected]
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Sales Company,
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 e Infantería, Km. 9.5, San Gabriel In ustrial Park
Carolina, Puerto Rico 00985
– 6 –
If you need assistance with the set-up or operation,
please call 1-800-211-PANA(7262)

– (1) –
Instalación de la batería
Inserte la batería en la uni a portátil como se muestra ajustan o en la
polari a correcta (#). Presione la batería hacia abajo hasta que esté bien
instala a en el compartimiento ($). Una vez instala a, cierre la cubierta.
Instalación!
Conexión del adaptador de CA
•USE UNICAMENTE EL ADAPTADOR DE CA PQLV2 e Panasonic (N.° e pe i o
PQLV2Z).
•El a apta or e CA eberá permanecer conecta o en to o momento. (Durante la
utilización es normal que se caliente el a apta or.)
Manual de instalación
LEA ESTAS INSTRUCCIONES ANTES DE LA UTILIZACIÓN
GUÁRDELAS.
La KX-TGA230B/KX-TGA230W es una uni a portátil opcional para el
KX-TG2352W/KX-TG2382B.
Este manual e instalación escribe únicamente los pasos necesarios para
iniciar el funcionamiento e la uni a portátil. Lea las instrucciones e
funcionamiento el KX-TG2352W/KX-TG2382B para obtener más etalles.
Unidad portátil inalámbrica de 2.4 GHz expandible
Modelo KX-TGA230B/KX-TGA230W
Uni a e carga ...................................1
Carga or N.° e pe i o PQLV30017ZB (Negro)
N.° e pe i o PQLV30017ZW (Blanco)
A apta or e CA N.° e pe i o PQLV2Z (PQLV2)
Cubierta e la uni a portátil................1
N.° e pe i o PQKK10131Z3 (Negro)
N.° e pe i o PQKK10131Z2 (Blanco)
Batería .................................1
N .° e pe i o N4HHGMB00001
(HHR-P103)
Presilla para el cinturón .......1
N.° e pe i o
PQKE10352Z3 (Negro)
N.° e pe i o
PQKE10352Z2 (Blanco)
Accesorios (inclui os)
Para solicitar accesorios extra, llame al 1-800-332-5368.
1
2
A apta or e CA
Tomacorriente
(CA 120 V, 60 Hz)

– (2) –
•Limpie los contactos de carga de la unidad portátil y de la unidad de carga con un
paño suave y seco una vez al mes. Limpie con más frecuencia si la unidad está
expuesta a la grasa, el polvo o humedad alta. Si no, la batería tal vez no se cargue
correctamente.
Información acerca de la batería de la unidad portátil
Después e que su batería Panasonic esté completamente carga a:
Carga de la batería
Ponga la uni a portátil en la uni a e carga y
cárguela urante 15 horas aproximadamente antes
e utilizarla por primera vez.
•El in ica or CHARGE se encen erá, sonará un piti o y
se visualizará “Charging”.
•Cargue la batería cuan o:
– se visualice “Recharge” en la uni a portátil,
– “ ” parpa ee en el visor, o
– la uni a portátil emita piti os intermitentemente
mientras esté sien o utiliza a.
•Si la batería se ha escarga o, la uni a portátil
visualizará “Charge for 15h” cuan o la ponga en la
uni a e carga. La uni a portátil no funcionará. Deje
que se cargue.
Operación Tiempo de operación
Mientras se utiliza (HABLAR)
Mientras no se utiliza (Espera) Hasta 4 horas Hasta 7 ías
Utilización de la presilla para cinturón
Po rá colgar la uni a portátil en su cinturón o bolsillo utilizan o la presilla para
cinturón.
Para colocar la presilla para cinturón Para quitar la presilla para cinturón
Contactos
e carga
In ica or
CHARGE

Registro!
Esta uni a portátil inalámbrica eberá ser registra a en la uni a base
KX-TG2352W/KX-TG2382B. El número e extensión e la uni a portátil será
asigna o al hacer el registro.
Solamente po rá registrarse una uni a portátil ca a vez.
Asegúrese de que la unidad base y las otras unidades portátiles no estén
siendo utilizadas. El registro deberá completarse antes de 1 minuto.
Para cancelar el registro e la uni a portátil, consulte las instrucciones e
funcionamiento el KX-TG2352W/KX-TG2382B.
– (3) –
El visor e la uni a portátil muestra las instrucciones
como se muestra a la erecha.
1
Unidad base:
Presione HANDSET LOCATOR (ALL) hasta que
el in ica or CHARGE parpa ee.
2
Unidad portátil:
#Presione á.
$Espere hasta que suene un piti o largo y el
visor muestre el número registra o. Entonces
se habrá completa o el registro.
•El número e registro “[1] ”
a “[3]” se mostrará en la parte
superior erecha el visor.
•Po rá etener el registro presionan o (OFF) en la uni a portátil
y presionan o HANDSET LOCATOR (ALL) en la uni a base.
•Después e registrar la uni a portátil en la uni a base, confirme que las otras uni a es
portátiles (la primera y segun a) registra as previamente visualizan “Talk” presionan o
. Si una e las uni a es portátiles no visualiza “Talk”, vuelva a registrar esa uni a
portátil en la uni a base.
Ej., Número e extensión 3
•La ilustración e la uni a base es el KX-TG2352W.
In ica or CHARGE
á
Press [ALL] on
base for 3 sec,
then press [
H ].
Handset
Registering
Handset [3]
Registered
HANDSET LOCATOR (ALL)
[3]

– (4) –
Auricular opcional!
Enchufan o un auricular opcional a la uni a portátil po rá conversar por teléfono
con las manos libres. Utilice solamente el auricular Panasonic KX-TCA88.
Para hacer el pe i o, llame al número e teléfono para accesorios e la página 1.
Conexión del auricular
Abra la tapa e la toma para auricular y conecte el auricular a la toma para
auricular como se muestra.
H
Toma para auricular
Montaje en pared!
El carga or pue e montarse en una pare . Conecte el a apta or e CA. Instale
los tornillos utilizan o la plantilla para pare e abajo. Monte el carga or (#).
Deslícelo hacia abajo ($) y espués hacia abajo y hacia la erecha (%) hasta
fijarlo en su sitio.
$
#
%
PLANTILLA
PARA PARED
2.45 cm
(15⁄16")
Tornillos
A la toma
e corriente
2.45 cm
(
15
⁄
16
")