8181
BasicOperations
To hear messages
Dial your home phone number. While the
outgoing message is played back...
Enter your remote control number.
Announcement Press . You will
hear recorded messages if any.
NOTE
●This operation can be made only from
telephones which can send DTMF signals.
Personal phone (KX-FKN551)
■ To make a call
Lift the personal phone from the charger and press
(
11
). Dial.......To end the call, place the
personal phone on the charger or press (
12
).
■ To receive a call
When the phone rings... Lift the personal
phone from the charger or press .
Talk......To end the call, place the personal
phone on the charger or press .
■ To transfer the call to the base unit
Press ( 4
) during a call. ( When you use
multiple personal phones, press .)
Place the personal phone on the charger, or
press when the other party answers.
■
To transfer the call to another personal phone
Press during a call. Press ｰ
(Intercom No.). Place the personal phone on
the charger, or press when the other party
answers.
Base unit (VE-GP05)
■ To make a call
Lift the handset. Dial.
■ To receive a call
When the phone rings... Lift the handset.
■ To place the current call on hold
Press (
15
) during a call.
(You can place the handset on the base unit.)
■ To retrieve the held call
●If you have returned the handset on the base
unit, lift the handset.
●If you have not returned the handset on the
base unit, press again.
■ To transfer the call to the personal phone
Press (
14
) during a call. ( When you use
multiple personal phones, press ｰ
(Intercom No.).) Place the handset on the base
unit when the other party answers.
■ To use TAM (Telephone Answering Machine)
When you leave home, press (
11
) to turn
on the indicator.
(To deactivate, press again to turn off the
indicator.)
When receiving a call while TAM is activated, it
answers the call automatically in Japanese,
and records the incoming messages.
Then, the indicator starts flashing.
When you return home, press to play
back the messages.
The indicator turns off and the answering
mode is deactivated.
After playing back the messages, press to erase
the messages or press to keep the messages.
To play back the message while TAM is
deactivated, press (
12
).
* Up to 50 messages can be recorded for approx.
12 minutes in total.
■ To hear recorded messages while away from
home (Remote control)
Preparation before you leave home
Store a remote control number.
With the handset placed on the base unit, press
. Enter the desired 4-digit
number. Press , then press .
When you leave home, press to turn on
the indicator.
●The number after the button shows the location of
the button described in the previous page.
QuickReferenceGuide
困ったとき
