Panduit BlackFin CT-2600/LBT User manual

HE.20216_A © 11/2021 R&D-2
CT-2600/LBT
Instruction Manual
Panduit Corp
www.panduit.com/blackfin
Pic. similar
Serialnumber
HE.20208

CT-2600/LBT
optional:
BL1850(B) (RAL4)
BL1840(B) (RAL40)
BL1830(B) (RAL2)
NG2
ACHTUNG! Garantiesiegel
Bei Beschädigung Garantieverlust
ATTENTION! Warranty seal
If broken loss of Warranty
HE.17537
HE.18055_D
FCC ID: RFRMS42 • IC: 4957A-MS42
Model: CFM
This device complies with Part 15 of the FCC Rules and with
Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation
BL1815 (RAL1)
HE.20216_A © 11/2021 I
Pic. similar / Intended Use
WORK SERVICE DON´T DO General
safety rules
Auf dem Knapp 46
D-42855
Remscheid
HE.17537
HE.20208
batch# e.g. 304711
datecode e.g. X = 2027; N = Jan.
consecutive# e.g. „142“ = tool # 142
datecode
Year Code Month Code Month Code
2022 R Jan. N July V
2023 S Feb. P Aug. W
2024 T Mar. Q Sept. X
2025 V Apr. R Oct. Y
2026 W May S Nov. Z
2027 X June T Dec. 1
304711
XN
142

CT-2600/LBT
31 2
1,6“
3“
4,9“
4,6“
14,2“
4“
2,4“
125mm
116mm
60mm
0,4“40mm
75mm
360mm
103mm
9mm
HE.20216_A © 11/2021 II
Pic. similar / Intended Use
WORK SERVICE DON´T DO General
safety rules
1 2 3
WARNING
Read all safety warnings, instructions, illust-
rations and specifications provided with this
power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
HE.20215
CT-2600/LBT Crimping Tool
Voltage: 18 V •Force: 4.0 Ton (35kN)
Gustav Klauke GmbH • Auf dem Knapp 46
42855 Remscheid Germany • EK354CFMPAN
For use only with 18 V Makita battery
LISTED
TOOL
80103907
HE.20208
<70dB <2,5m/s2
+104°F
+40°C
+14°F
-10°C
5,3 lbs
2,4 kg
4 Ton
(35 kN)

CT-2600/LBT
Use tool only with 18 V Makita battery
Li-ion
BL1850(B) 45 min.
RAL4
BL1840(B) 36 min.
RAL40
BL1830(B) 22 min.
RAL2
BL1815 15 min.
RAL1
10 - 40°C
®
Li-ion & Ni-MH 7.2-18V
DC18RC
Alle Bedienungsanleitungen auch unter www.klauke.de abrufbar
All manuals are also available on www.Klauke.com
HE.20216_A © 11/2021 III
Pic. similar / Intended Use
WORK SERVICE DON´T DO General
safety rules

CT-2600/LBT
30% max.
PRESS
PRESS
PRESS
on/off
PRESS
HE.19625_B
STOP
>350°
Authorised Service Center
HE.20216_A © 11/2021 IV
Pic. similar / Intended Use
WORK SERVICE DON´T DO General
safety rules
1.2.3.
1.2.3.
PRESS
PRESS

CT-2600/LBT
1. 2.
HE.20216_A © 11/2021 V
Pic. similar / Intended Use
WORK SERVICE DON´T DO General
safety rules
1.
2.
PRESS
PRESS
PANDUIT
CD-2600
(KC4XX)
(KA4XX)

CT-2600/LBT
CLICK
HE.20216_A © 11/2021 VI
Pic. similar / Intended Use
WORK SERVICE DON´T DO General
safety rules
PRESS
PRESS
CLICK
CLICK
PANDUIT
CD-2600
(KC4XX)
(KA4XX)
90°

CT-2600/LBT
*1 Error codes:
1 Overcurrent fuse
2 Overcurrent comparator
3 Overheat board
4 Overheat battery
5 Battery empty, operation stop
6 Faulty crimp
motor in operation
7 Faulty crimp
motor not in operation
8 Low battery
9 Battery empty
10 RTC battery low
11 Tool deactivated
12 Service necessary
13 RTC not found
14 BT unit not found
16 Pressure sensor not found
17 Burst pressure exceeded
18 Battery temperature too low
1 Überstrom durch
Überstromsicherung
2 Überstrom durch Komparator
3 Boardtemperatur zu hoch
4 Akkutemperatur zu hoch
5 Akkuspannung während der
Operation zu gering
6 Fehlpressung bei
laufendem Motor
7 Fehlpressung bei
stehendem Motor
8 Niedrige Akkuspannung
9 Akku leer
10 RTC-Batterie leer
11 Werkzeug deaktiviert
12 Service nötig
13 RTC nicht verfügbar
14 BT-Modul nicht verfügbar
16 Drucksensor nicht verfügbar
17 Berstdruck überschritten
18 Akkutemperatur zu gering
*2 (2Hz)
P 3 bar
P 3 bar
F 74 lbf
F 369lbf
ERROR CODE:
****
TOTAL:
t = 0.07 h
Q = 21.12 Ah
n = 174
USER 3:
RD3 Doppelklick
NEXT SERVICE:
9826 OPs
Doubleclick
Singleclick
enter menue
to change:
bar / psi
to change:
kN / lbf
Doubelclick
select
Doubelclick
confirmed
Cycles
(until next service)
Since manufacturing:
operating houres
Capacity
# crimps
Bluetooth (if connected) *2
Battery charging level
Current pressure
Pressure max.
Error code *1
USER SELECT:
RD3 Einfachklick
bar / psi
bar / psi
kN / lbf
USER SELECT:
RD3 Doppelklick
USER SELECT:
RD3 Doppelklick
3 sec.
3 sec.
3 sec.
1
2
3a
4a
4b
3b
3b
4c
3c
4d
3d
5
6
7
BT
BT
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
HE.20216_A © 11/2021 VII
Pic. similar / Intended Use
WORK SERVICE DON´T DO General
safety rules

CT-2600/LBT
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le foncti-
onnement.
NOTICE:
Changes or modifications made to this equipment not expressly approved by Klauke may void the FCC authorization to operate this equipment.
HE.20216_A © 11/2021 VIII
Pic. similar / Intended Use
WORK SERVICE DON´T DO General
safety rules
PRESS
PRESS
≤20 sec.
PRESS
PRESS
REPEAT
> 20 sec.
PRESS
PRESS
≤20 sec.
Klauke i-press®Software
www.klauke.com/connectivity
Klauke i-press®App

CT-2600/LBT
HE.20216_A © 11/2021 IX
Pic. similar / Intended Use
WORK SERVICE DON´T DO General
safety rules
DIN EN 50110
N
O
C
H
I
L
D
R
E
N
<
1
6
A
T
W
O
R
K
•
BEFORE WORK
OIL
1.
2.
3.
HE.17441
[email protected]
WEEE
2012/19/EU
Authorised Service Center
Authorised
Service
Center
SAFETY
3 years or
10.000 operations
Authorised Service Center