Paradox DB7 User manual

Doorbell Installation Manual
DB7 Quick Installation
with BlueEye app
Add Doorbell to Existing Site by Installer
Once Doorbell connected,
next screen will be presented,
Doorbell Added to Site
Press to go to Doorbell
congurations screen
Connect to Site 01 Site 01

Connect Chime to Doorbell
Power for Doorbell
Doorbell Configurations
After the DB7 is connected, plug the DBC5 into the AC outlet. Press the Up and Down arrow
buttons to change the melody. Next, press and hold the Select button for ve seconds
until a beep sound and then press the Ring button of the doorbell. You should hear a beep
from the chime, meaning you are connected. The next time ring button will be pressed, the
selected melody will be played. For other adjustments, please refer to user manual.
Connect the two power wires to the DB7. Existing doorbell wires can be used but BELL can
NOT be connected in series and must be shorted. A wide power supply voltage range can
be used, 12-24 volt AC or DC, minimum 500mA and 7.5W.
Thank you for Considering Paradox Products