Paradox NV75M Guide

NV75M-EI00 03 2016 paradox.com
NV75M/MX
Installation Manual V1.0
16 Meter Indoor Dual
Mironel Optics with Anti-Mask
and Pet Immunity Dual Detector
General Description
The NV75M/MX is an indoor industry-leading detector providing
superior 16 meter detection with rock solid stability thanks to the
revolutionary dual Mironel Mirror/Fresnel PIR optics. Combined with
Paradox true Pet Immunity and best-in-the industry active Anti-Mask
technology (EN Grade 3). The NV75M/MX provides an unmatched
high security solution for any indoor installation.
Installing the NV75M/MX (Fig. 1)
Wall Mount
Bracket Mount
Creep Zone/Pet Selection
Note: Remove detector assembly as described in Fig. 1. When
selector is UP, Pet Mode; when DOWN, Creep Zone is active and
there is no Pet Immunity.
Dip Switch Settings
Sensitivity Settings
LED Display
Programming the NV75MX via Keypad or Baby-
Ware
Via Keypad
1. Enter EVO Installer Programming Mode, programming section
4003.
2. Enter the detector’s 8-digit Serial Number. Enter the 3-digit
Section as per Table 2.
Cover Tamper
Step 1 Step 3
NV75MX
TMPCOMALMCOM AM
+
YELGRN
123
BLKRED
NV75M
Step 2
(Table 1)
Wall Mount x6
Bracket Adjustment
Screw Opening
Corner Mount x4
Tamper Screw
Wall/Corner
Wiring Entry x2
1
2
345
Table 1
DIP SWITCH OFF ON (DEFAULT)
1. LED OFF ON
2. EDGE DUAL SINGLE
3. FUTURE FUTURE FUTURE
Feature LED Status Indicator
Tamper open Green: ON for 0.3 seconds every 30
seconds
PIR sensitivity level setting Green: Flashes 1-5 times according
to the selected level
Alarm detection Red: ON for 3 seconds
Booting/Tamper close Green/Red alternating flashes
for 45 seconds
Anti-mask detection Flashes orange rapidly (pre-alarm
state) andthen constant orange when
in alarm.
UP - Pet DOWN - Creep
7m
9m
16m
13m
11m*

NV75M-EI00 03 2016 paradox.com
Table 2
Section [001]:
Section [002]:
Section [003]: 00 (Low) to 04 (Max)
Via BabyWare
1. Double-click the serial number of the NV75MX to open the
detector’s programming.
2. Configure the required settings.
Beam Patterns Top View
Side View
Technical Specifications
Bit Function Status/Description
[1] LED ON: LED ON (default) OFF: LED OFF
Bit Function Status/Description
[3] Future Future
[4] Edge ON:Single (default) OFF:Dual
1.5m 3m 5.5m 10m 16m
(52 ft)
90˚
1.5m3m5.5m 12m10m12m
16m
(52 ft) Creep
Zone
0m 60cm
Creep
Zone
60cm
10m5.5m3m1.5m
Creep
Zone
16m
(52 ft)
60cm 12m
Detector 1 Detector 2 Both Detectors
Specification Description
IR Movement Detection 2 detectors, 2 dual element sensors, 2
Mironel Optics
Optics Two Mironel Mirror/W Fresnel optics with
mechanical Pet / Creep Zone
Coverage 16 meters/52 feet; 90° - complies with
EN50131-2-2 Grade 3
Anti-Masking Active IR with Dual detectors, blocking
items up to 30cm and lens applied
materials including clear lacquer; meets
and exceeds EN50131-2-2 Grade 3.
Pet Immunity Pet up to 50cm will not be detected
Single/Dual Edge Infrared detection requires entry or exit in
single-mode; in Dual-edge, entry and exit
is required for both detectors
Creep Zone Mechanically selectable Creep Zone
detection 1.5m/4ft. (cancels Pet Immunity
when active)
Power - Wired Models NV75M/NV75MX 23mA
Operating Temperature -35º to 50º C (-31º to 122º F)
Relative humidity 95% non-condensing
Tamper Dual - Cover and Wall
Dimensions 128 x 62 x 54 mm/ 5.1 x 2.4 x2.1 in
Weight 120 gr/ 0.3 lb
Certifications CE, EN50131-2-2 Grade 3, Class II
Warranty
For complete warranty information on this product, please refer to the Limited Warranty Statement is found on the website: www.paradox.com/terms or contact
your local distributor. Specifications may change without prior notice.
Patents
US, Canadian and international patents may apply. Paradox is a trademark or registered trademark of Paradox Security Systems (Bahamas) Ltd.