Paradox TM50 Touch User manual

TM50 Touch User Guide - Magellan and Spectra SP Systems

Main Screen Outside/Inside temperature
System Status
Zones Panic
Info Menu
OneScreen Monitoring Slide Show
SpotOn Locator
Date/Time

Arming/Disarming your System
Arming/Disarming your system:
1. Select arming method by
pressing corresponding button
from main screen.
2. Enter code (4 to 6 digits).

Menu
For menu options press the Menu
button and follow the on-screen
prompts. Menu options include:
• Bypass Zones
• PGMs
• Alarm Clock
• Zone Chiming
• Clean Screen
• Add-on
• Settings
• System Setup
Arming/Disarming your System

Entering User Programming
Enter user programming:
1. Press Menu.
2. Press System Setup.
3. Enter Master Code.
4. From the Master Programming
menu press Users.

Programming a New User
Programming a new user:
1. Press Add button to add a user.
2. Enter the new User Code and press
Save button.
3. Confirm User Code by entering a
2nd time then press Save.
4. Option to learn remote in, press
button on remote or press Skip.
5. User is now valid.
Entering User Programming

Settings Screen
Setting screen accessed through
Menu then Settings.
Settings include:
• Display Settings
• Sound
• Slide show
• Home Page
• Language
• Update Firmware
• Calibrate Sensor
• Product Info

OneScreen Monitoring™Settings Screen
To Access OneScreen Monitoring*:
1. Press the button.
2. View open/closed zones (an open door
means a zone is open).
3. Press on the Test button to test all
your zones (SoloTest Mode).
4. Press on the Settings button (top
right corner) to access more options.
*OneScreen Monitoring is an optional feature.
Please contact your installer for more information.

SpotOn Locator™
To Access SpotOn Locator*:
1. Press the button.
2. Follow the onscreen instructions on
how to upload photos, images, or
schematics for your personalized
floor plans.
3. Follow the onscreen instructions on
how to add/move/delete zones from
your floor plan.
*SpotOn Locator is an optional feature. Please
contact your installer for more information.

SlideShow
To Access SlideShow:
1. Press the button to view the
default slideshow.
2. Press on the Settings button
(bottom right corner) to access
more options.

0
microSD Card
The TM50’s integrated SD card slot has a cover
clip for its protection.
If it is foreseen that the microSD card will be used
frequently, it is best that the microSD card cover clip
be removed before installation. This is because once
the keypad is installed, removal of the microSD card
requires you to unclip the entire front plate of the TM50.
To remove/replace the microSD (without cover clip):
1. Push down on the microSD card to unlock.
2. Gently pull out the microSD card to remove.
If desired, replace card.

microSD Card
To remove/replace the microSD card
with cover clip:
1. Using a screwdriver, pry the front
housing assembly from the backplate.
Once removed, you will notice that the
microSD cover clip protection is part of
the backplate.
2. Remove the microSD card from the
front housing assembly. If desired,
replace card.

Notes

Warranty: For complete warranty information on this product, please refer to the Limited Warranty Statement found on the Web site www.paradox.com/
terms. Your use of the Paradox product signifies your acceptance of all warranty terms and conditions. One or more of the following US patents may apply:
7046142, 6215399, 6111256, 6104319, 5920259, 5886632, 5721542, 5287111, and RE39406 and other pending patents may apply. Canadian and international
patents may also apply. © 2013 Paradox Ltd. All rights reserved. Specifications may change without prior notice. www.paradox.com

TM50M-EU01
Printed in Canada 02/2013