Parrot CK3100 LCD User manual

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
PARTNER
PARTNER
The brand name PEUGEOT PARTNER and the PEUGEOT logo are the property of AUTOMOBILES PEUGEOT.
This document is only valid for the vehicle model PARTNER® year 2008 to 2011, excluding all other models in the same range and excluding
later modifications made to the vehicle by the manufacturer.
The Parrot brand name and logos are the exclusive property of Parrot SA.
Installation manual:
Parrot MKi + Parrot
CK3100 range

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
PARTNER
Accessories required
Disassembly
20min
Kit installation
30min
Refitting
20min
Testing
15min
Total
1h25min
YES
ACC wire
NO
ISO
YES
UNIKA
FRONT SPEAKER
TEL mode
ALL
MUSIC mode
Fitting time (estimated) / Main features
Tools
- TORX screwdriver
- Multimeter or Test lamp
- Hose clamp
- Electrical tape
- Round file (or a knife)
"Please contact your Wholesaler to purchase
accessories."
Kram ref.
Dealer ref.
CK range
86 165
9706 CF + 9706 AT
MKi range
84744
9706AT
Photos not contractually binding
CK range MKi range
Updating
Plastic trim removal tools
FACOM / BERNER
FACOM Sleeve
DX-25 (n°4 spanners)
To get the most out of your hands-free kit we recommend that you update your
software regularly. The update procedure can be found at
www.parrot.com/usa/support/downloads

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
PARTNER
Disassembly

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
PARTNER
Disassembly 1 / 2
Insert the removal tools into the
slots on each side of the radio.
Unclip, pull and lift the radio
disconnecting the antenna
connector.
Using the plastic trim tools, unclip
and remove the storage
compartment from the centre
console. (Do not disconnect it.)
Remove screws 1, 2, 3 and 4
located above the glove box.
1
3
2
4
5 6
Using the plastic trim tools,
unclip the top of the glove box
(Do not remove it.)
Using the plastic trim tools, unclip
the clip located on the left side of
the dashboard.
1 2 3 4

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
PARTNER
Disassembly 2 / 2
Release the fuse box cover and
place it on the floor making sure
not to remove it.
Remove the door seal on the
driver’s side.
7 8

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
PARTNER
Pass the cable towards the radio
housing.
Microphone passage
Stick the microphone bracket
(supplied) to the steering
column after having thoroughly
cleaned the surface.
1 2

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
PARTNER
Feeding the accessory cable
Using a guide feed the cable
from the glove box towards the
radio housing.
Feed the cable through the hole
on the right of the glove box.
making sure you leave sufficient
length.
1 2
Replace screws 1, 2, 3 and 4
located above the glove box.
3

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
PARTNER
ISO
adapter
Fitting the hands-free system 1 / 2
Connect the adaptor 86165/9706 CF+AT for the
CK or 84744/9706AT for the Mki to the original
connector. Connect all of the wires to the blue
box as shown in the diagram below. Test before
reinstalling then slide the assembly into the
bottom housing of the central console. (Located
under the storage compartment.)
1

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
PARTNER
Fitting the hands-free system 2 / 2
Bevel cut the two left-hand
corners (top and bottom left) of
the support supplied. Then, after
thoroughly cleaning the surface
stick it between the air vents on
the left side of the radio.
Feed the cable through the storage
compartment housing. (Make sure
that you DO NOT cut the cable.)
2 3
!

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
binding.
PARTNER
Testing
Before refitting the system, switch the kit on using the
ignition (or by starting the car). By pushing the central knob
of the remote control, check:
1 - That the menu is displayed on the screen. (Language or
iPod.)
2 - That the system can be muted. (Click in the blue box.)
3 - That there is no sound coming from the speakers.
4 - That the sound from the voice menu is coming out of the
front speakers.
5 - Then turn off the ignition, check that the kit switches off
and that the "goodbye" message appears on the screen. (If
this fails, reverse the fuses on the kit's wiring harness.)
6 - Pair a telephone with the kit to make a call. (Check that
both the microphone and the kit are working.)