Parrot 3100 User manual

User's Guide
Guide de l'utilisateur
Kullanım Kılavuzu
English Français Türkçe
ﻞﻤﻌﺘﺴﳌ� ﺪﺷﺮﻣ
ﻲﺑﺮﻋ

www.parrot.biz
www.parrot.biz

English
Français
Türkçe
ﻲﺑﺮﻋ
5
15
25
44

Warning :
The manufacturer Parrot S.A. and it’s affiliates should not be held
liable towards
End-Users or third parties for prejudice caused by misuasage of the
product,
nor for usage that would be in violation of local traffic regulations and
laws.
Disclaimer :
The information in this document is subject to change without notice
and does not
represent a commitment on the part of vendor. No warranty or repre-
sentation, either
expressed or implied, is made with respect of quality, accuracy or
fitness for any particular
purpose of this document. The associated with it at any time without
obligation
to notify any person or organization of such changes. In no event will
the manufacturer
be liable for direct, indirect, special, incidental or consequential dama-
ges arising
out of the use or inability to use this product or documentation, even if
advised of the
possibility of such damages. This document contains materials protec-
ted by copyright.
All rights are reserved. No part of this manual may be reproduced or
transmitted in any
for, by any means or for any purpose without express written consent.
Product names
appearing in this document are mentioned fot identification purposes
only.
All trademarks, product names appearing in this document are regis-
tred property of
their respective owners.
FCC Compliance Statement :
This device complies with part 15 of the FCC rules. Operation is sub-
ject to the following
two conditions :
1- This device may not cause harmful interference.
2- This device must accept any interference received, including inter-
ference that may
cause undesired operation.
Declaration of Conformity:
We, Parrot S.A. of 174 Quai de Jemmapes, 75010 Paris, France,
declare under our sole
responsibility that our product, CK3100, CK3300, CK3500, to which
this declaration
relates is in conformity with appropriate standards EN300328,
EN301489-17, EN 60950
following the provision of Radio Equipment and Telecommunication
Equipment directive
1995/5/EC with requirements covering EMC directive 89/336/EEC and
Low Voltage
directive 73/23/EEC.
Bluetooth:
The Bluetooth® word mark and logos are owned by the Bluetooth®
SIG, Inc. and any
use of such marks by Parrot S.A is under license. Other trademarks
and trade names
are those of their respective owners.

English
User’s guide
EN

CK3100 Advanced Car Kit
6User’s guide
OUTLINE
Bluetooth technology offers voice and data transmission via a
short-distance radio link. It can link a wide range of wireless
electronic equipments and spread the communication possibili-
ties of mobile telephones and numerous pieces of equipment.
Based in Paris, founded in 1994 by Henri SEYDOUX, Parrot
S.A is one of the fastest-growing companies. From the very
beginning its specialties have been technologies associated
with voice recognition and signal processing for telecoms and
cars.
The Parrot CK3100 Car Kit allows you to use your cellular
phone while driving your car with the best of comfort and the
best security possible.
The names of your callers will appear on the screen.
Your phonebook is accessible from the control screen.
The voice command and the voice recognition allow you to
use it without letting goof your steering scroll button.
Your conversation is carried over the loud speakers in your
vehicle.
On the screen you can access your telephone phonebook.
Caller name display.
Voice recognition.
Volume control.
Mutes the in-car radio.
Dual call.
Pick-up and hang-up via voice
command.
INTRODUCTION
Functionalities

CK3100 Advanced Car Kit 7
EN
User’s guide
LCD screen Power cable
electronic box microphone
mute cable manual
Contents of the package
CK3100 MOUNTING
Installation of the electronic box
The CK3100 system is fitted with 4 outputs:
Input - in-car radio output LCD screen power
microphone
It is recommended to install all the cables before fixing the
control box. Each cable supplied has a different connector to
avoid wrong connections.
The box must not be installed near the heating or the air-con-
ditioning.
Ensure that it is not exposed to sunlight. Avoid installing it
behind metal walls, which could alter the quality of the blue-
tooth link.
The mute cable is equipped with black ISO connectors and
with a “line out” output.
In-car radio with «line in» inputs
Preferably use this type of connection by joining the brown and
green wires as well as the yellow wires of the “mute” to the
back of your in-car radio.
In-car radio with «ISO» connectors
Disconnect the audio and supply bundles from the in-car radio
Link the female connectors of the mute supply cables and of
Installation of the in-car radio cable
the power supply cable to the in-car radio. Connect the audio
and supply bundles from the vehicle to the male connectors.If
the in-car radio is equipped with a mute input, connect the
yellow wire of the mute cable to one of the “ Mute in “ inputs 1,
2 or 3.
In-car radio without «ISO» connectors
You must obtain an “ISO” adapter cable
Installation of the power supply cable
The red wire of the power cable must be connected
to the permanent 12V, the orange wire to the 12V and
the black wire to the earth.
Verify the electric wiring of the ISO supply bundle of
the in-car radio.
In some vehicles it is necessary to reverse the positions
of the red and orange wires.
This operation is simply done by reversing the fuse
holders.
Do not connect the orange wire to the permanent
12V, otherwise you risk causing the vehicle battery to
go flat.

CK3100 Advanced Car Kit
8User’s guide
CABLE DIAGRAM CONNECTION
Microphone :
The microphone must be aimed
at the driverand can be installed:
Anywhere on the vehicle /
On the LCD screen.
LCD screen :
Several accessories allow the screen to be installed in
multiples sites in the body of the vehicle.
Fastening on the dashboard
Using the scoth tape double-face provided.
Just stick the display on a plane and
clean spot on the dashboard .
With a foot on the dashboard
Once the display has been mounted on the foot provided in
the packaging, stick this foot using the scotch tape double-face
on the dasboard.
From then on, the screen becomes directional.
Mounting Instructions
- Rotate “B” from the left
to the right to screw “B” on “A”
Only use the screws “D”.
- Insert the cable from the “A”
through the hole on “B”
- Then, screw “C” on “B”.
Only use the screw “E”
Don’t forget to insert the disc
Installation of the microphone and the console
A : LCD screen
B : Foot
C : Back support
E : Iron screw ( 10mm )
D : Plastic screws (10mm )

CK3100 Advanced Car Kit 9
EN
User’s guide
The menus are accessible from then on
and the hands-free kit announces their
name.
From then you are connected to the
hands-free kit and can use it for com-
municating.
Call: Access your mobile phone’s phonebook.
Receive a call: Press the green button of the hands-free kit
to pick up the mobile phone.
Hang up: Press the red button of the CK3100.
Messaging: You have the option of
accessing the functions of your mes-
saging from the hands-free kit.
Click on the scroll button while
communicating. A menu appears and
allows you to select a character then
validate it. Return to the communication
screen by selecting the arrow.
Repeat function: Press the green key of the hands-free kit
for several seconds to call the last number dialled.
Communication volume: Adjust
the communication volume by turning
the scroll button.
During the initial charging, it is necessary to pair your mobile
phone with the hands-free kit.
Activate Bluetooth on your mobile
Search for peripheral devices:
For more information, refer to the booklet on your telephone
( Pairing section )
Or visit www.parrot.biz
Home / Support / Download
Once it is detected, “Parrot
CK3100” is displayed on your
mobile phone
Enter the link code 1234 and vali-
date.
“Pairing underway” is displayed on
the CK3100
“Pairing complete” is displayed on
the screen, once pairing is successful.
The CK3100 then connects to your mobile phone.
Once it is connected, the Bluetooth logo is displayed on the
screen (except for mobile phones fitted with the Headset pro-
file).
For certain types refer to the page 12 “pair a telephpne”
With certain mobile phones, the name of your mobile,
the battery level and the network are displayed on the screen.
PAIR DEVICE AND FIRST USE
WARNING
Some telephones useBluetooth in a
particular manner. Verify in the
“Preferences” / “Advanced Pref. “ / “Pair
Telephone” menu if the model of your
telephone is listed there. Then select
the option in the menu.
SAP
If you want to utilise the Sim
Access Profile service on
your telephone, please refer
to the GSM section of the
booklet

CK3100 Advanced Car Kit
10 User’s guide
The menu of the CK3100 is made up of the following head-
ings: phone book, call log, dial number, voice cmds, settings,
SIM card, GPS.
Synchronisation of your telephone index
with the CK3100 is one of the innovative
functions of this hands-free kit.
This synchronisation is automatic with
numerous telephones. If this is not auto-
matic, you have the option of transferring
your telephone contacts to the kit via Bluetooth.
Refer to the section “Sending contacts via Bluetooth” (or
“Object push”) in your telephone user manual.
Reception of contacts via Bluetooth is available for the Sony
Ericsson P800/P900 and smartphones if pairing is done in the
corresponding mode.
(refer to the “ATTENTION” section in the “Pairing” chapter)
Once your contacts are transferred to the kit, you can access
the voice recognition function available in the “Voice com-
mands” menu.
You have the option of making a call from the menu index.
Select phonebook
Select a letter using the scroll button
Confirm by pressing the scroll button
Once the contact is selected:
the green button dials the number by
default.
MENU the scroll button helps select from the different numbers of
the contact.
Press the green button to call.
This heading displays the list of calls and
is divided into 3 sub-menus:
Missed calls / received calls / sent calls
Select the desired contact
Press the scroll button or the green but-
ton to redial.
Dial a number by turning the scroll but-
ton to the right or the left.
Press the scroll button to select a char-
acter.
The basket icon deletes the last character.
Once the number is dialled, press the
green button to make the call.
This menu programs the voice recognition of the hands-free kit.
It is divided into 3 sub-menus: index / key words / voice reco.
selection
To attribute a voice print to a contact, select a letter:
Select the name by clicking on the scroll button.
Once the name is selected, click on the scroll button to initiate
the machine learning.
Follow the instructions displayed on the screen.
Once the voice imprint is attributed, a bubble is displayed to the
right of the name.
Phonebook
Call from the phonebook
Last calls
Dial a number
Voice commands