Patriot Lighting 343-1474 User manual

PATRIOT LIGHTING® (Post Cap) WARRANTY
1-YEAR LIMITED WARRANTY:
This PATRIOT LIGHT® brand light fixture carries a one (1) Year Limited
Warranty to the original purchaser. If, during normal use, this PATRIOT
LIGHT® light fixture fails die to a defect in material and workmanship within
one (1) year from the date of purchase, simply bring this light fixture with your
original sales receipt back to your nearest MENARDS® retail store. At its
discretion, PATRIOT LIGHT® agrees to have the lighting fixture replaced
with the same or similar PATRIOT LIGHT® product free of charge, within
the stated warranty period, when returned by the original purchaser with
original sales receipt. Notwithstanding the foregoing, this limited warranty
does not cover damage or failure caused by misuse or abuse including but
not limited to improper installation, accident, unauthorized repair,
maintenance, or modifications of the merchandise. This warranty: (1)
excludes expendable parts including but not limited to light bulbs batteries;
(2) shall be void if this lighting fixture is not installed in the U.S.A.; (3) does
not cover products installed within three miles of saltwater coastline or any
area prone to salt spray; and (4) does not cover any losses, labor, injuries to
person/property or costs. This warranty does give you the specific legal
rights and you may have other rights, which vary from state to state. Be
careful, the purchaser has sole responsibility for proper installation
compliance with all state and local code requirements. Seller's employees
are not qualified to advise you on the use of this Merchandise. Any oral
representation(s) made will not be binding on seller or its employees. The
rights under this limited warranty are to the original purchaser of the
Merchandise and may not be transferred to any subsequent owner. This
limited warranty is in lieu of all warranties, expressed or implied including
warranties or merchantability and fitness for a particular purpose. Seller shall
not be liable for any special, incidental, or consequential damages. The sole
exclusive remedy against the seller will be for the replacement of any defects
as provided herein, as long as the seller is willing or able to replace this
product or is willing to refund the purchase price as provided above.
For questions/ comments, technical assistance or repair parts
Please call Fusion Toll Free: 1-877-615-1378 (Monday to Friday
Eastern Standard Time between the hours of 8:30am - 5:00pm).
SAVE YOUR RECEIPTS. THIS WARRANTY IS VOID WITHOUT
THEM
BRECKLIN 2PK SOLAR POST CAP LIGHTS
Installation Manual for Item # 343-1474
Please read this manual carefully and completely before using your
Post Cap.
Keep this manual in a safe place for future reference.
FEATURES
High-efficiency industrial quality solar
panels
Super bright LED bulbs
Automatic operation with sensor turning
on the light at night
Unique reflector design for complete 360
degree lighting
Mounting Hardware Included
4 Adapters to fit: 3.625", 4", 4.5" & 5" post
1 Year Limited Warranty
IMPORTANT
The battery should be fully charged before first
use. Charge under direct sunlight on a sunny
day before first use. Make sure the pull tab
under the solar housing has been removed.
Keep your solar lights away from other night-
time light sources, such as streetlights.
Make sure the solar panels are not covered by
dust, snow and debris. Clean it with a soft
damp cloth or paper towel periodically. Avoid
the use of abrasive cleaning agents.
Use only solar rechargeable "AA" batteries for
your solar lights. Replace a new battery of the
same size each year for optimum
performance.
Attention: Do not dispose of batteries in
fire. Batteries may explode or leak.

INSTALLATION
Remove the red pull tag under the Solar Housing.
Attach it to the lens by turning it clockwise until firmly
attached. (Fig. 1)
Screw the standard post mount bracket to the desired
wood post (Fig. 2) OR attach the Composite/PVC post
mount bracket to the Composite/PVC post by pushing
together. (Fig. 3). Attach the solar light with a clockwise
twist until you hear a "click".
To use the Routed Post Sleeve Design Option:
Remove the lens from the Solar Housing (if Attached)
by turning it counter-clockwise. You will not use the
lens for this application. Attach the Composite/PVC
post mount bracket to the Routed Post Sleeve by
pushing together (Fig. 4). Attach the Solar Housing to
Composite/PVC post mount bracket with a clockwise
twist until you hear a "click".
Note:
After you solar light charges under direct sunlight on
a sunny day, it will automatically turn on at dusk.
Your solar light should not be placed near night-
time light sources as streetlights might keep the light from automatically
turning on.
The post to be installed with your post cap should be higher than 1 foot
for the lantern to receive maximum sunlight.
REPLACING THE BATTERY
Step 1: Turn the solar housing counter-clockwise until it separates from the
lens. (Fig. 5)
Step 2: Remove the battery compartment lid by pushing the tab on it.
Remove the old battery. Replace with a new solar rechargeable "AA" battery
of the same mAh or higher. (Fig. 6)
Step 3: Attached the solar housing assembly to the lens with a clockwise
twist until you hear a "click". (Fig. 7)
Caution: Solar rechargeable batteries contain Nickel-Cadmium or Nickel-
Metal Hydride and must be recycled or disposed of properly. Do not mix old
and new batteries. Do not mix alkaline, standard (carbon-zinc), or
rechargeable batteries.
MAINTENANCE
Troubleshooting
Q: Light does not work.
A:
1. Make sure the red pull tag under the solar housing has been removed.
2. Make sure the battery connection is tight
3. Make sure the battery has been charged under direct sunlight
4. Make sure your light is not placed near other night-time light sources
5. Battery may need to be replaced. Replace with a new solar
rechargeable battery of the same size
Q: Short run time
A:
1. Battery may need to be replaced. Purchase a new solar rechargeable
battery at your nearest MENARDS® retail store.
2. Make sure the solar housing is clear from dust, snow and debris which
would prevent the battery from charging
3. Make sure the battery has been charged under direct sunlight
4. Make sure your light is not place near other light sources.