Pax Technology TSYS A920 User manual

20171020 v1.3 9 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
5. A920 Power On/Off
Power up or power off the terminal by
pressing and holding the small rectangle
button on the right side of the terminal for
2-4 seconds and then release.
Power Button

20171020 v1.3 10 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
6. A920 Communication Setup
For the terminal to communicate with the
host, other devices or to download
applications the terminal communication
method must be configured in advance.
This document covers Wi-Fi.
Wi-Fi to
DSL or Cable
Connection
Ethernet Cable
DSL or Cable Line
Step 3. Connect the Ethernet
cable to the LAN port on the
modem and connect the other
end of the Ethernet cable to
the LAN port on the Wi-Fi
access point.
Step 4. Configure the terminal Wi-Fi
settings using the terminal parameters.
Please refer to the owners manual of the
modem and Wi-Fi access point for
connection and configuration information.
Step 1. Connect the
Cable or DLS line from
the service provider
into the modem.
Step 2. Connect the
other end of the cable
line to the service
provider outlet.

20171020 v1.3 11 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7. A920 Wi-Fi Setup
The A920 supports Wi-Fi for network and
internet access. Available access types are
DHCP, Static and Manual Proxy. The
following instructions include setting up for
each communication type.
Wi-Fi DHCP Setup
7.1.1 The Wi-Fi settings are located within
the Android Settings option.
Application

20171020 v1.3 12 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.1.2 From the IDLE screen select the
Settings Icon.

20171020 v1.3 13 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.1.3 Input the Settings password and then
select the green check button and then
“OK”.

20171020 v1.3 14 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.1.4 Turn on the Wi-Fi option. Then select
the Wi-Fi option.
#1 Turn on Wi-Fi
#2 Select Wi-Fi Option

20171020 v1.3 15 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.1.5 To see the available Wi-Fi networks
turn on the Local Wi-Fi option. Only local
Wi-Fi networks that have the SSID
broadcast
option
enabled will
be displayed.
To view or
edit the
network
settings select
the desired
Wi-Fi
network.

20171020 v1.3 16 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.1.6 After selecting the desired Wi-Fi
network, input the Wi-Fi case sensitive
password and select “Connect”.
When the
terminal has
successfully
connected to
the Wi-Fi
access point
the Status will
display
“Connected”.
Select the
back icon to
return to the
Settings menu
or to exit.

20171020 v1.3 17 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.2 Wi-Fi Static Setup
7.2.1 To setup Wi-Fi Static perform steps
7.1.1 to 7.1.5. Then go to step 7.2.2.
7.2.2 Top half of the screen. Select the
desired Wi-Fi network and input the Wi-Fi
case sensitive
password. Then
select the
Advanced options.
In the IP settings
select the Static
option. In the IP
address enter the
static IP address.

20171020 v1.3 18 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.2.3 Bottom half of the screen. After the
static IP address is entered then scroll the
page up. In the Gateway section enter the
gateway address. Next in the Network
prefix length
enter the
network length.
In the DNS 1
section enter
the DNS 1 IP
address. In the
DNS 2 section
enter the DNS 2
IP address. To
save settings
and exit select
the “CONNECT”
option.

20171020 v1.3 19 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.3 Wi-Fi Manual Static Setup
If SSID is disabled on the access point the
terminal will not display the SSID on the
available Wi-Fi network listings. It will be
necessary to manually configure the
terminal for Static connection types.
7.3.1 To setup Wi-Fi Manual Static perform
steps 7.1.1 to 7.1.5. Then go to step 7.3.2

20171020 v1.3 20 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.3.2 If the desired Wi-Fi network is not
displayed it will be necessary to manually
configure the network. In the upper right-
hand corner
select the
three dots
icon. Then
select the
“Add
network”
option.

20171020 v1.3 [email protected]
[phone]
PAX A920 QUICK SETUP GUIDE
7.3.3 Upper half of the screen. The Add
Network pop up screen will display. Enter
the case sensitive Wi-Fi network SSID. Next
select the
security type
from the
drop-down
menu. Now
enter the case
sensitive Wi-Fi
network
password.
Next select
“Save”to save
the settings.

20171020 v1.3 22 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.3.4 Bottom half of screen. Scroll the
screen up screen towards the top. Select
the IP settings and then choose Static from
the drop-down menu. In the IP address
field enter the IP address. In the Gateway
section enter the gateway address. Next in
the Network
prefix length enter
the network
length. In the DNS
1section enter the
DNS 1 IP address.
In the DNS 2
section enter the
DNS 2 IP address.
Next select “SAVE”
to save the
settings.

20171020 v1.3 23 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.4 Wi-Fi Proxy Setup
7.4.1 To setup Wi-Fi Proxy perform
steps 7.1.1 to 7.1.5. Then go to step 7.4.2.
7.4.2 To manually configure the network.
In the upper
right- hand
corner select
the three dots
icon. Then
select the “Add
network”
option.

20171020 v1.3 24 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.4.3 The Add Network pop up screen will
display. Enter the case sensitive Wi-Fi
network SSID. Next select the security
type from the
drop-down
menu. Now
enter the case
sensitive Wi-Fi
network
password.
Next select
the “Show
advanced
options”.

20171020 v1.3 25 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.4.4 Select the Proxy drop down menu and
select the Manual option.

20171020 v1.3 26 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.4.5 To scroll the screen up or down place
finger onto screen and slide the screen
towards the top or bottom. In the Proxy
hostname
section enter
the proxy host
name. Then
in the Proxy
port section
enter the
proxy port
number. If
there is a
Bypass for
proxy value,
then enter the
bypass proxy
information.

20171020 v1.3 27 PAX Technology®
Customer Support su[email protected]
[phone]
www.pax.us
PAX A920 QUICK SETUP GUIDE
7.4.6 Next select the IP setting and then
choose Static from the drop-down menu. In
the IP address field enter the IP address. In
the Gateway section enter the gateway
address. In the
Network prefix
length enter the
network length.
In the DNS 1
section enter
the DNS 1 IP
address. In the
DNS 2 section
enter the DNS 2
IP address. To
save settings
select
“CONNECT”.