Pax Technology A980 User manual

PAX TECHNOLOGY INC.
Contents Qty.
A920 POS Terminal 1
Paper Roll 1
Power Cord 1
Power Adapter 1
Please check the components aer unpacking. If any of
the components are missing, please contact the dealer.
Contents Checklist
1
Product Descripon
2
EMV Reader
Power Buon
Front Facing
Camera
Magnec Stripe
Reader
Contactless Area
LCD Screen
Contactless Area
MAC Address
Label
5MP Rear Camera
Oponal Base
POGO PINS
Baery Cover
Hatch
Volume +
Power Buon
Volume -
USB Type-C Port
Printer Hatch
Note: Product images shown may be dierent than actual
product recieved.
Power
4
3
SAM, SIM, & Micro SD Card
1. Remove the back cover.
2. Gently remove the baery from the device.
3. Insert the card into the relevant card slot.
4. Replace the baery and back cover.
POWER ON:
Press and hold the power buon down for 3-5 seconds
and then release.
POWER OFF:
Press and hold the power buon down for 3 to 5
seconds and then release.
• Do not use or place the baery in direct sunlight
and/or smokey, dusty environments.
• Do not strike, squeeze, and/or tread on baery.
• Do not throw the baery in any liquids or place in/
near res.
• If the baery is deformed or damaged, please stop
using immediately and replace it.
• If the connuous working me is only half of a new
baery, the baery life may be at its end. Please
replace it.
• The specied baery model and charger must be
used, otherwise there may be an explosion.
• The charging me cannot exceed 24 hours. If the
baery is out of power, please recharge in an
appropriate me and then disconnect the device.
• Please recharge the baery at least once every 6
months to avoid shortening its life.
• Replace baery every two years.
• Be sure to follow the instrucons to dispose of
wasted baeries.
5
Lithium Ion Baery
Product Descripon CONT’d
2

PAX TECHNOLOGY INC.
Cleaning the Device
6
Installaon and Usage Tips
7
• Do not use industrial strength or abrasive cleaner
as it may damage or scratch the screen.
• Do not immerse the device in water or liquid.
• Do not spray water or cleaner into EMV Card
Reader or ports.
• To clean the screen, apply dislled water or
mild glass cleaner onto a so, lint-free cloth and
gently wipe terminal.
1. If any cables become damaged, seek a replacement.
2. Do not insert unknown materials into any port on the
A920; this may cause serious damage.
3. If repairs are required, please contact a professional
technician instead of aempng them on your own.
4. Avoid exposing the device to an excessively hot,
dusty, or strong electromagnec envrionment.
5. Do not vibrate, shake, or drop the device.
CAUTION: Changes or modicaons not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate th equipment.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules.
Operaon is subject to the following two condions:
(1) This device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired
operaon.
FCC WARNING
This equipment complies with Part 68 of the FCC rules
and the requirements adopted by the ACTA. On the
body of this equipment is a label that contains, among
other informaon, a product idener. If requested,
this number must be provided to the telephone
company.
RF Exposure Informaon
This device meets the government’s requirement
for exposure to radio waves. This device is designed
and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by
the Federal Communicaons Commission of the U.S.
Government.
PAX Customer Support
For quesons or help with the terminal installaon
please contact your service provider or PAX customer
support.
Technical Support Contact Informaon:
Phone: [phone]
Email: [email protected]
URL: www.pax.us
This document is provided to you for
informaonal purposes only. All features
and specicaons are subject to change
without noce. PAX’s name and PAX’s
logo are registered trademarks of PAX
Technology Inc. All Rights Reserved.
Responsible Party:
PAX Technology Inc.
8880 Freedom Crossing Trail,
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk: 877-859-0099
www.pax.us