DC Output: When the DC power is turned on, the LCD screen will display
“DC OUT”. The USB ports and 12V DC socket will be active.
AC Output: When the AC power is turned on, the LCD screen will display
“AC OUT”. It will show the current charge of the battery and percentage
level (each bar represents 20%). The AC outlets will be active. When used -
The AC meter shows the percentage of the AC output of the current load
used. AC outlets will provide Pure Sine Wave 220V.
Battery Level: The display shows the current charge of the battery. Each
bar represents 20%. When charging - the bars will illuminate one bar at a
time. When the bars stop the battery is fully charged. When there is less
than 10% of charge remaining the battery icon will begin to flash. At this
point Please charge the power station immediately.
Battery % / Battery Voltage: The power station will reserve some power to
protect itself from over-discharging, even if the battery level drops to 0%.
When the power station is running devices that require high power
consumption, the low-voltage alarm will be displayed when the battery level
drops to 10%-20%. When this occurs, recharge the power station
immediately.
(Section 3.1) LCD Intelligence Display
Figure 4( intelligence display screen)
DC output power
Charge
Discharge
Time
Battery level
AC output power
AC output power
Battery percentage(%)/
Battery voltage(V)
Temperature Alarm
Charge/discharge power
AC output(W)/Voltage(V)
AC output overload alarm
PF value/charge and discharge time
PORTABLE POWER STATION
7
