Pecron S500 User manual

ShenZhen Pecron Technology CO.,LTD.
Outdoor Portable Power Station Specification
Model：S500
Thanks for choose our outdoor portable power station S500
Please read the manual carefully before you use!
Shenzhen Pecron Technology Co.,Ltd
Http://www.pecron.com

Content
1. Introduction：.................................................................................................................................................... - 1 -
2. Panel Function Description........................................................................................................................... - 2 -
3. Product Specification...................................................................................................................................... - 4 -
4. Environment Condition.................................................................................................................................. - 5 -
5.Electrical Specifications:.................................................................................................................................. - 5 -
5.1-5.4 Specifications.................................................................................................................................. - 5 -
5.5-5.7 Protection Instructions.................................................................................................................... - 6 -
6. Operating Instructions And Precautions................................................................................................. - 7 -
6.1 How To Use AC......................................................................................................................................... - 7 -
6.2 How To Operate：.......................................................................................................................... - 8 -
6.3 How To Charge：............................................................................................................................ - 8 -
6.4 How To Use DC 12V and USB：..................................................................................................- 9 -
7. Product Function Test................................................................................................................................... - 10 -
7.1 Test Condition：............................................................................................................................- 10 -
7.2 Basic Function Test Display........................................................................................................- 11 -
8.Misuse And Countermeasures.................................................................................................................... - 12 -
9.Package................................................................................................................................................................ - 13 -
10.After Sales Service:........................................................................................................................................- 14 -

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 1 -
1. Introduction：
pecron S500 is a functional outdoor portable power station,it has safe Lithium-ion
battery and invertor conversion technology,with light weight,high capacity,high
power function,to provide portable power solutions,its battery capacity is
10.8V35.7Ah,its main function is as below:
♦230V50Hz or 110V60Hz pure sine wave output
♦9~12.6V8A DC output,5V2A-USB port
♦Cigar port output 9~12.6V8A
♦LED Emergency Light
♦Battery capacity display screen
♦Support solar charging,car charging(solar cable and car charging cable is
optional)
S500 can be used in series smart products,such as mobile phones,satellite
telephone,digital camera,mobile driver,digital camera,tablet,car start,outdoor
illumination,water pump,post and telecommunications,medical device,and it also
can use in these area:financial,first aid,dig,exploration,military, science, media,
tourism, disaster relief, medical assistance and areas with widespread power
shortages.
Please read the user manual carefully before you use,and please save it with the
purchase certificate for future reference.

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 2 -
2. Panel Function Description
①DC Cigar Port:Provide power supply to 12V appliance,output voltage is
9~12.6V,Continuous output current is 8 amps, maximum output current is 15A
②USB 5V Port:supply power with 5V and max current of 2A.
③Smart Display:showing the battery capacity, percentage,power and time of
charging and discharging
④USB Output/Power switch:Press this button to view the remaining power of
the power unit. At the same time, the display will turn on, as same as the USB
output.If need to turn off it, please press it again.
⑤DC Charging Input:Supply power to appliances with DC port by
13~30V7A(MAX).Support car charging,solar charging,DC5521 connector,max
power 90W.
⑥DC 5525 Outlet:Supply power the DC appliance 9~12.6V8A（MAX 15A）

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 3 -
⑦AC Socket:After the AC switch turn on,the AC output will work,output voltage is
230V or 110V
⑧AC Switch:Turn on the AC switch,the AC output works,turn of AC switch,AC
output stop working.
⑨LED Light
⑩LED switch:Press the switch,LED light on.

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 4 -
3. Product Specification
NO.
Description
S500
1
Output power
500W
2
Peak power
1000W
3
Output voltage
AC pure sine wave 230V/50Hz or AC110V60Hz
DC 9~12.6V8A（MAX 15A） USB 5V2A
4
Output
waveform
Pure sine wave
5
Battery type
18650-14P3S( 3.6V 3.5Ah)
6
Battery
capacity
529.2Wh（10.8V35.7Ah）
7
Battery type
Lithium-ion
9
Charging time
7~8H
10
Charging
voltage and
current
DC 13~30V 7A（MAX） Solar 18V
11
Protection
Over voltage,low voltage,over temperature,over
load,AC short circuit
12
LED
1W*3
13
Working
temperature
0℃~45℃（Charge）
-20℃~60℃（Discharge）
14
Product
dimension
L206*W149*H266mm
15
Shell material
UL94-V0 PC+ABS
16
Net weight
4.5kg

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 5 -
4. Environment Condition
5.Electrical Specifications:
5.1-5.4 Specifications
NO .
Test Project
Specification
Unit
Remark
5.1
AC Charging
5.1.1
Rated Voltage
100 ~ 240
VAC
5.1.2
Rated Frequency
50/60
Hz
5.1.3
Charging Voltage
16.8
VDC
5.1.4
Charging Current
7
A
5.2
Solar Charging
5.2.1
Voltage
13~30
VDC
5.2.2
Current
≤7
A
5 .3
DC Output
5.3.1
Rated Voltage
230/110 ± 5%
VAC
5.3.2
Rated Frequency
50/60±1%
Hz
5.3.3
Rated Power
400
W
5.3.4
Harmonic distortion
＜3%
5.3.5
Conversion efficiency
≥85%
5.4
DC Output
5.4.1
USB Voltage
5
VDC
5.4.2
USB Current
2.0
A
5.4.3
5525 DC Output Voltage
9~12.6
VDC
5.4.4
5525 DC Output Current
8
A
5.4.5
DC Cigar port output voltage
9~12.6
V
5.4.6
DC Cigar port output current
8
A
NO.
Test Project
Specification
Unit
Remark
1
Working Temperature
0~45
℃
2
Storage Temperature
-20~60
℃
3
Humidity
45% ~ 85%
RH
4
Cooling type
Air-cooled
Cooling≥45℃
5
Altitude
3000
m
6
Mean time between failures
≥5000
H

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 6 -
5.5-5.7 Protection Instructions
NO .
Test Project
Specification
Unit
Remark
5.5
Inverter
5.5.1
Over Temperature
Inverter
cooling≥65℃
℃
No AC output，wait until
the temperature down
5.5.2
Over Load
＞450
W
Lock,no output,until
disconnect and restart
5.5.3
AC Output Circuit
—
W
Lock,no output,until
disconnect
Remark
When 5.5.2 5.5.3 is under protection status,need to shut down AC switch,when
turn on again,the AC output will restore.
5.6
Controller
5.6.1
USB Over Current
3
A
No output
5.6.2
5525 Over Current
15
A
No output
5.6.4
Cigar Port Over Current
15
A
No output
5.6.3
Solar charging
protection,voltage shut
down
>12.6
V
Disconnect charge after
achieve voltage
5.7
Battery pack
5.7.1
Single-cell overcharge
voltage protection
4.2 V
V
Keep output and
disconnect charge
5.7.2
Single-cell over-discharge
voltage protection
2.8V
V
Shut down output
5.7.3
Battery pack
over-temperature protection
≥65
℃
Shut down input and
output
5.7.4
Short circuit protection
Yes
Shut down output after
short circuit
5.7.5
Battery pack over current
protection
120-180
A
Shut down output after
over current

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 7 -
6. Operating Instructions And Precautions
To make sure safety transportation,when you receive the power station,the
power station is under low capacity status,please charge the power station to full
capacity before you use.
If you need to full charge the power station,please use our standard power
adapter for S500,or use 18V solar panel to charge it.
During charging, the battery remaining display screen will on. When the power
supply is fully charged, the display will off, and the S400 power supply is fully
charged.
When using solar panel to charge,S500 accept 13-30V solar panel to charge
it,to make sure charging efficiency,please use 18V solar pane to charge it,solar
panel power should be 100~250W,open circuit voltage lower than 30V.
To make sure charging safety,please use our standard original charger,when
S500 full charged,the charger will stop working automatically,and the display will
off.
6.1 How To Use AC
Please note the following before using:
(1)Please make sure the input voltage and frequency is same as S500
(2)Please make sure the appliance rated power is lower than 500W.
* If you violate these,the charger may damage or out of work.
* If your appliance power higher than 500W,please choose other higher
power portable power station.
Remark：Because when some appliances turn on,its consumption power is
higher than the rated power,such as sensitive load device start up current normally
is 3-8 times than its rated power,Energy-saving lamps start up power is dozens of
times than its rated power,if their start up power is higher than the emergency
power station’s peak power,it will trigger the over load protection,and shut down
the power station.The S500 is with over load,short circuit,over temperature
protection.
(3) When the following happens,S500 will stop output to protect the
appliance:

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 8 -
① When the appliance load power is higher than the power station rated
power.
② AC output or appliance circuit
③ The internal temperature of power station is too high
④The internal battery voltage is too low
6.2 How To Operate：
Step 1:Turn on the AC switch,battery remaining capacity display will turn on
automatically,and shows the remaining capacity.
Step 2:Check the load input voltage and frequency.
Step 3:Check the load power,make sure it won’t over S500 rated power
Step 4:Connect the appliance to the AC socket,turn on the AC switch
Step 5:After use the power station,please turn off the AC switch to shut down the
output.
Step6:If the power station capacity use off or the remaining capacity is too
low,please recharge S500 for your next use.
(Note:When you stop using the power station,please turn off the AC switch.If
not,the S500 will be in a high-energy self-consumption mode, consuming the
stored power of the power supply. )
6.3 How To Charge：
we can use the follow charging types to charge the battery.
+
=

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 9 -
(1)Use our standard power adapter,when we start to charge,we need to use the
power cord to connect with the adapter,and the adapter another side will connect to the
power station input charging port,then plug to the grid.
(2)Use our car charging cable,when you use car charging,after you start up the car,and
then just insert the cigar connector to the car cigar port,the other side connect to the
power station input port.When the car is not on start up status,please don’t use car
charge.
(3)Solar charging,when you use solar panel to charge the power station,please use the
solar cable to connect the solar panel,and the other side connect to the power station
input port.(Please make sure solar panel max voltage not over 30V,Min voltage not lower
than 13V.)
Note：
①Our S500 standard power adapter only use in our S500,please don’t use in other
device and keep away from rain.
②When the portable power is left unused for a long time, the battery will run out. Please
make sure to charge it every six months.
6.4 How To Use DC 12V and USB
=> DC 12V,rated current 8A.overload current 15A，please make
sure the connector can bear big current when you use big current,to prevent the
connector temperature too high to damage the power station.
=> DC 12V cigar port,rated current is 8A,overload current 15A,please
make sure the connector can bear big current when you use big current,to prevent
the connector temperature too high to damage the power station.
=>Press the DC switch,the USB output is on,and the display screen is
on,press again to shut down.

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 10 -
7. Product Function Test
7.1 Test Condition：
No
.
Project
Test condition
Check item
1
High-altitude
test
1. Pressure≤=11.6Kpa，T =20±5℃
2. No package,no electricity
1. Appearence
2.Power performance
2
Temperature
test
1. Temperature between 40±2℃ and 75±2℃
2. Repeat the test 10 times
3. Switching time is 30 minutes
1. Appearence
2.Power performance
3
Vibration test
Amplitude：1.52mm，
Scanning frequency range：5Hz ~ 10Hz， Scan
speed： About 10 ㎡/ S3,
Scanning frequency range：0Hz〜200Hz，Scan
speed：About 3 ㎡/ S3，
Scanning frequency range：200Hz ~ 500Hz，Scan
speed：About 1 ㎡/ S3，
The duration of each vibration is 20 minutes. It
vibrates from all directions of the X, Y and Z axes.
The appearance of the power supply is free of any
signs of damage. The product can pass each
function test, and the product identification text is
clear, complete, and clear. There is no shaking or
squeaking noise; the screws are fastened firmly
and there are no sliding teeth.
1. Appearence
2.Power performance

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 11 -
7.2 Basic Function Test Display
7.2.1 Discharge test under load 7.2.2 Charge test
7.2.3 12V 5525 output current test 7.2.4 USB port output current
7.2.5 12V cigar port output current test 7.2.6 LED test

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 12 -
8.Misuse And Countermeasures
Error
Root
Solution
Press any switch,no LCD
display
Interior battery no output
Charge up
No AC output after pressing
AC switch,LCD display is
normal
Over Temperature
Disconnect the load
Over Load
Check the loading power and
decrease it
Low Voltage
Charge up
USB no output
USB Output/Screen
Switch is off
Press the switch to turn on
12V or USB DC consume
energy quickly
AC switch is on; standby
current is too large
Turn off AC switch during DC
output
Alert on
The internal battery is
about to run out and
will stop working soon
Charge up
Not full charged by solar
panel charger
1.The solar panel is not
suitable
2.Sunshine is not enough
Choose another solar panel that
is much more suitable. And
ensure that the charging voltage
is higher than 13V.

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 13 -
9.Package
NO .
Package Content
Quantity
1
S500 Power Station
1
2
Power Adapter
1
3
Power Cord
1
4
Car Charging Cable
1
5
Solar Cable（Optional）
1
6
User Manual And Warranty
Card
1
Net weight（kg)：6.2
Carton size（mm)：373*294*234
Quantity（pcs )：1PCS/CTN

Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http;//www.pecron.com Tel：[phone]
- 14 -
10.After Sales Service
All pecron portable power station warranty time is 12 month since the sales date.
During the warranty period, our company will be responsible for the defects on material
and process, we will change the damaged parts after receiving them back or maintain the
product for free once our technicians inspect that the breakdown occurs normally;But we
are not responsible for the following situations even though it’s during warranty period:
• Take apart the product
• Damage on surface coating and appearance.
• Breakdown due to wrong installation, packing and usage. Customers should do this
according to the manual instruction.
•Breakdown or damage caused by accident, man-made and environment( misoperation,
crash, unsuitable voltage, damp and etc.)
•Breakdown or damage caused by natural hazard beyond control( earthquake, fire,
tsunami and etc.)
•Maintenance is not including package and products accessories;
•We will offer paid service once warranty period is over.