Pecron H600 User manual

ShenZhen Pecron Technology CO.,LED
Specification For Portable solar power generator
Model：PECRON - H600
Thanks a lot for your choice pecron –H600 !
Please read the manual carefully before you use!
Shenzhen Pecron Technology CO.,LTD
Http://www.pecron.com

Contents
1. Product introduction .........................................................................................- 1 -
2. Panel function description ................................................................................- 2 -
3. Technical specification .....................................................................................- 4 -
4. Environmental condition ..................................................................................- 5 -
5. Electrical specification .....................................................................................- 5 -
5.1-5.2 Input power specification ..............................................................- 5 -
5.3-5.4 Output power specification ............................................................- 5 -
5.5-5.6 Protection specification ...................................................................- 6 -
6. Operation instructions and precautions ............................................................- 7 -
6.1 How to use AC output.........................................................................- 7 -
6.2 How to operate ....................................................................................- 9 -
6.3 How to charge the battery .............................................................- 10 -
6.4 How to use DC 24V/6A、24V/5A、12V/5A and QC3.0 ................- 11 -
7. Test for basic functions ...................................................................................- 12 -
7.1 Test conditions .......................................................................................- 12 -
7.2 Test for basic functions .......................................................................- 12 -
8. Common problems and solutions ...............................................................- 15 -
9. Packing Information ........................................................................................- 16-

- 1 -
1. Product introduction：
Pecron -H600 is a multiple and portable AC-DC emergency power generator,
which s designed with the safe lithium-ion battery and SPWM inverter
technology.
It’s a kind of back-up power station that’s very easy to carry and convenient
offering power to electrical appliances with advantages of light weight, large
capacity , high power and multiple functions.This item is always used in the
field of mobile office working, emergency communication, power lines repair,
medical facility, exploration and survey, military, fire rescue and somewhere
is lack of power energy; The capacity of H600 is 25.2V/26.8AH/675.36WH.
The followings are their main functions:
♦220V/50Hz or 110V/60Hz pure-sine wave AC output;
♦24V/5A、24V/6A、12V5A,USB(QC3.0）dual output；
♦Smart display indicating the battery capacity, power of input and
output and remaining working hours；
♦LED emergency light;
♦Solar and car charging (optional)；
Pecron-H600 can meet power supply for many kinds of appliances such as
mobile phone, satellite phone, digital camera, mobile hard disk, tablet
computer, LED lamp, laptop computer, car boot ,outdoor lighting,water pump,
telecommunications,medical equipment,etc. And it can also be used in the
following fields like finance, first aid, mining, exploration,military,science,
media, tourism, disaster relief, medical aid and and somewhere lacking of

- 2 -
advanced technology.
2. Panel function description：
1.AC output switch: Long press it to turn on the AC output and long
press again to turn off it.
2.DC output switch: Long press it to open the USB output and again to
turn off it.
3.ON/OFF, long press to turn on the unit and again to turn off it. Fast
double press to switch on the led light and operate again to shun down it.
4.Switch indicator: When turn on the switches, the corresponding
indicators will become green; When turn off the switches, the indicators goes
out.
5.Smart Display: Show the remaining battery capacity with precise

- 3 -
percentage; Show the real load power during charging and discharging;
Show how many hours to fully charge the device when charging; Show the
left working hours when discharging.
6.LED light
7.USB(QC3.0) socket: When turn on DC switch, it can charge DC
appliances.（DC5V/2.1A 9V/2A 12V/1.5A).
8.DC 5525 socket: When turn on DC switch, it can charge DC
appliances. (DC 21-30V/5A).
9.DC 16MF-3B three pins aviation plug: When turn on DC switch, it can
charge DC appliance. (21-30V/6A)
10. Charging port 16MF-4B four pins aviation plug ( 1 and 2 are
positive, 3 and 4 are negative): charging with input 10-40V.
11. DC 5525 socket: When turn on DC switch, it can charge DC
appliance. (12V5A)
12.AC output socket: When turn on AC switch, AC 220V or 110V output
will work.

- 4 -
3. Technical specification：
NO.
Model：
H600
1
Continuous
output power
600W
2
Peak output
power
1200W
3
Output voltage
AC pure sine wave 220V/50HZ
DC 24V/5A 24V/6A 12V/5A
QC3.0 （5V2A, 9~12V1.5A）
4
Battery model
Lithium-ion 18650-8P7S( 3.6V 3.35Ah)
5
Battery Capacity
25.9V 26.8AH
6
Life of battery
70%@1000cycle
7
Charging time
5 -6 H
8
Charging voltage
and current
DC 10~40V 6.5A (MAX, external changer）
9
Protection
Over-voltage, over temperature, overload, AC
short circuit protection, self-recovery function
10
Working
environment
0℃~45℃for charging
-20℃~60℃for discharging
11
Dissipation
Air fan for forced cooling
12
Dimension(mm)
L225*W90*H326
13
Shelf material
PC+ABS
14
Weight(kg)
5.3

- 5 -
4. Environment Conditions:
5. Electrical specification:
5.1-5.2 Input
NO.
Test Item
Parameter
Unit
Remarks
5.1
AC input （built-in charger）
5.1.1
Rated voltage
180V ~ 260V
V
5.1.2
Rated frequency
50±5%
Hz
5.1.3
Rated current
0.8-1
A
5.1.4
Converter
efficiency
≥86%
Vin=220Vac rated load
5.2
DC input
5.2.1
voltage
29.4
V
external changer
5.2.2
current
≤6.5
A
5.3-5.4 Output
NO .
Item
Parameter
Unit
Remarks
5 .3
AC output
5.3.1
Rated voltage
230±5%
V
5.3.2
Rated frequency
50±1%
Hz
5.3.3
Rated power
600
W
NO.
Test Item
Parameter
Unit
Remarks
1
Work Temperature
0-45
℃
2
Storage
Temperature
-20 ~ 60
℃
3
Humidity
45% ~ 85%
RH
4
Cooling method
Air cooling
Heat radiation ≥
45℃
5
Altitude
3000
m
6
MTB
≥5000
H

- 6 -
5.3.4
Harmonic distortion
＜5%
5.3.5
Converter efficiency
≥92%
5.4
DC Output
5.4.1
USB voltage
5/9/12
V
5.4.2
USB current
2.1/2.0/1.5
A
5.4.3
5525 output
voltage
24/12
V
5.4.4
5525 output
current
5
A
5.4.5
DC output voltage
of aviation plug
24
V
5.4.6
DC output voltage
of aviation plug
6
A
5.5-5.6 Protection Instructions
NO .
Test item
Parameter
Unit
Remarks
5.5.1
Overcharge, over-discharge, overload, over temperature and short-circuit
protection of lithium battery
5.5.2
Over voltage
（battery）
4.2 V
V
5.5.3
Low voltage
（battery）
＜2.8V
V
5.5.4
Over temperature
Inverter
cooling≥
65℃
A
Lock-up; No output until
temperature is decreased
5.5.5
Over load
700
W
Lock-up; No output,until
disconnected
5.5.6
Output short circuit
—
W
Locked,no output,until
disconnected
Remark
5.5.3 5.5.4 5.5.5 During protection, AC switch should be turned off. DC output
will be opened when the switch is turned on again.
5.6
DC output
5.6.1
USB over-current
2.1/2.0/1.5
±10%
A
5.6.2
5525 over-current
8
A
5.6.3
aviation plug
24Vover-current
8
A

- 7 -
6. Operation instructions and precautions:
In order to ensure the safety of H600, the battery is not full of power or in the
low power state during the transportation. Please charge the device by the
original charging cable or solar panel with max current of 8A when you need
to use it in the first time.
To ensure the safety, please use our original changer ( Pecron- H600), or
use solar charger with max current of 6.5A.
During charging, the battery capacity display will light and will be off after
fully charging.
Please choose 18-40V solar panel with max current 6.5A to charge the
device, if you prefer to solar charging. In order to improve the charging
efficiency, we suggest you charge by 36V solar panel. And the charging
power should be less then 250W and the open-circuit voltage should be less
than 40V.
To ensure the safety, please use the original charger. The battery volume
capacity will turn off automatically after being fully charged.
6.1 How to use AC output
Pecron - H600 is with 220V 50HZ pure sine wave output, rated power of
600W.
Please read the following information before using the power station

- 8 -
1 、The input voltage and frequency of appliances should be same with
that of H600.
2 、Please ensure the rated power is lower than the output power of
600W .
* The appliance will be damaged once above needs are not met.
* Please choose another portable power pack with higher power once the
power of appliances is higher than that of 600W.
Remarks：Since the consumed power of some appliances is greater than its
rated power when power-on, the overload protection will occur and power
output will turn off. For example, the general starting current for inductive
load equipment is up to 6~8 times of its rated power. And its starting power
for energy saving lamp is up to dozens of times of its rated power; Their
starting power is much more than the instant maximum power that the power
pack can bear, so the load protection works automatically. H600 is featured
with overload protection, short-circuit protection, over-temperature protection,
over voltage protection and so on.
3、H600 will stop to work to protect the device once following conditions
occur.
①、When external load power exceed the rated power load
②、AC output or load circuit
③、Internal temperature of the device is too high.
④、The voltage of the internal battery is too low.

- 9 -
6.2 How to operate：
Step 1：Press the AC switch to see the remaining power capacity volume
.
Step 2：Check the working voltage and frequency of the load.
Step3：Check the load power again to ensure it’s not higher than the rated
power of H600.
Step4：Plug in the AC socket of H600 and turn on the load switch.
Step 5：Turn off the AC output switch after using it.
Step 6：Please charge H600 on time if the battery is run off or lack of battery
so that you can use it conveniently next time.
Note：Please be sure to turn off the switch of AC power when you stop to
use it. Or it will be in high energy consume mode, consuming the energy in
reserve.

- 10 -
6.3 How to charge the battery pack
The rated power of pecron - H600 is 600W, and capacity is 25.2V 26.8AH; It
can be charged by the following way :
+ =
①
①Please charge by our original charger. Connect the female connector of
the cable to the original charger first, and then connect the other end to 220V
AC home power. Make sure to disconnect the home power end first and then
disconnect the power end after fully charged.
Note：
1. Please use the original accessories for the power pack and avoid raining.
2. Please charge the power pack every 6 months when you won’t use it since
the battery will be run off because of self-consumption model.

- 11 -
6.4 How to use DC 24V/6A、24V/5A、12V/5A and QC3.0：
DC24V is the continuous output voltage. The voltage of
this item is 19.6V~29.4V with max working current of 6A. We will provide the
below aviation plug without cable.
DC 24/12V with 5A rated current and 6A load
current. Press DC switch, the two light indicators is on, then the DC output
can work. Please ensure if the socket can go through with large current and
pay attention to the socket temperature for protecting the power pack.
DC 5V/2.1A 9V2A 12V/1.5A, Press DC switch, the
corresponding light indicator is on, then the QC 3.0 will work.

- 12 -
7. Testing show for product functions
7.1 Test conditions：
7.2 Testing show for basic functions
7.2.1 Discharging test under load 7.2.2 Charging test
No.
Test
Item
Test Conditions
Inspection
item
1
Altitude
Test
1. The pressure≤=11.6Kpa，T =20±5℃
2. no packed, no electrify
Appearance
and electric
specification
2
Temp.
test
1. under40±2℃and 75±2℃
2. repeated test for 10 times
3. switching time is 30s
、
4. 反复测试 10 次
5. 开关时间为 30 分钟
Appearance
and electric
specification
3
Vibrati
on test
Amplitude:1.52mm;
Scan frequency range: 5Hz~10Hz, scan speed: about 10 ㎡/s3;
Scan frequency range: 0Hz~200Hz, scan speed: about 3 ㎡/s3,
Scan frequency range: 200Hz~500Hz, scan speed: about 1 ㎡
/s3,
Duration 20min for each X,Y and Z axis direction.
Should be no sign of damaged,
No part inside shifted and function should be normal.
Product should pass functional test,
Should be no severe rub off marks or any cosmetic issue
Appearance and
electric
specification

- 13 -
7.2.3 12V 5525 output test 7.2.4 USB output test
7.2.5 24V 5525 output test 7.2.6 24V output of aviation plug
7.2.7 LED light test

- 15 -
8. Error Shooting
Error
Root
Solution
No LCD display after pressing
any switch
Interior battery power out
Charge up
Press AC switch, there is no
AC output but LCD display
normally
over-temperature
Disconnect the load
overload
Supply the load with rated power
is less than the device’s output
power
Low voltage
Charge up
No USB output, DC light
indicator is off
DC switch is not been
turned on
Press the DC switch
No 24V/12V output, DC light
indicator is off
DC switch is not been
turned on
Press the DC switch
24V、12V or USB consume
energy quickly
AC switch is on; standby
current is too large
Turn off AC switch during DC
output
Buzzer on ( Warning )
Interior battery power almost
being out; The UPS will be
off soon
Charge up
Not full charged by solar
panel charger
1. The solar panel is not suit
for our device
2. The sunlight is not
sufficient
Choose a suitable solar panel
with the current less than 6.5A

- 16 -
9. Package information
NO .
Packing list
Quantity(pieces)
1
H600 power pack
1
2
Charging adapter+cable
1
3
DC5525 to cigar port cable
1
4
16MF-3A 3 pins aviation plug
1
5
Shoulder girdle
1
6
Manual and warranty card
1
7
Car charging cable(option)
1
8
Solar charging cable（option）
1
Gross weight（kg) H600：8KG
Carton size（mm) ：L430*W175*H370
Quantity（pcs )：1pcs/carton