PEERLESS FLD-UNV Guide

ISSUED: 07-05-05 SHEET #: 124-9422-2 05-07-08
For customer service call 1-800-729-0307 or 708-865-8870.Visit the Peerless Web Site at www.peerlessmounts.com 1 of 3
Before you start check the parts list to insure all of the parts shown are included.
Note: Some parts may appear slightly different than illustrated.
E
A
Read instruction sheet before you start installation and assembly.
Model: FLD-UNV (-S)
Installation and Assembly - Universal lockdown brackets for
Plasma and LCD Desktop Stands
FLD-UNV FLD-UNV-S
Description Qty Part # Part #
Afrontlockdownbracket 2 124-1063 124-4063
Bbacklockdown bracket 2 124-1062 124-4062
C10-16 x 3/4 penta pin screw 2 520-9258 520-9281
DM5 x 1" penta pin tool driver 1 520-9249 520-9249
E#8 x .5 phillips screw 4 500-1011 500-1011
F#14nyloncapcover 2 560-1158 590-4190
Gwasher 12 540-9400 540-9400
H#8 x 3/4" phillips screw 4 500-1003 500-1003
Parts List BC
D
G
F
Position TV stand to proper location and mark front
of the stand on the desktop.
NOTE:Standmayappeardifferentthenillustrated.
FlipTV stand upsidedown and measurefrom the
front of the stand to the center of the screw as
shown in detail 1 to get dimension x. Add 1.035"
to get the mounting location of the front lockdown
bracket(A).
FRONT OFTV STAND
DETAIL 1
Remove screws that hold screen to the stand as
shownbelow.
TVSTAND
FRONT
BOTTOMVIEW
TOPVIEW
BACK OF SCREEN
x
H
FRONTOF TV STAND

ISSUED: 07-05-05 SHEET #: 124-9422-2 05-07-08
For customer service call 1-800-729-0307 or 708-865-8870.Visit the Peerless Web Site at www.peerlessmounts.com 2 of 3
+
++
A
Position the front lockdown bracket (A) by adding 1.035" with measurement x in step 3 as shown in detail 2.
Attach to desktop using two #8 x 3/4" phillips screws (H).
NOTE: If feet on base are taller than 1/8", use washers (G) between bracket (A) and desktop to achieve
desired height as shown in detail 3.
A
BOTTOMVIEW
BB
SIDEVIEW SIDEVIEW
TVSTAND TV STAND
DESKTOP DESKTOP
AA
FRONT EDGE OF STAND
1.035
(26)
X
DETAIL 2
B
BOTTOMVIEW
Flip TV stand right side up and slide into front lockdown bracket (A) so that screw in hole 1 locks securely
into slot of bracket.
ATTACHMENT POINT
Removerubber feet or screwsfrom one or twolocations on back ofstand depending on stand.Remove rubber feet
or screws from one or two locations on front of stand.Attach back lockdown brackets (B) to stand with screws (E).
Onfront location(s) leave 3/16"gap between stand andscrew (E).
H
H
DETAIL 3
G
IDEAL ALTERNATE
OR
FRONT OF
STAND
FRONT OF
STAND
DESKTOP
A
G

ISSUED: 07-05-05 SHEET #: 124-9422-2 05-07-08
For customer service call 1-800-729-0307 or 708-865-8870.Visit the Peerless Web Site at www.peerlessmounts.com 3 of 3
Attach back lockdown brackets (B) to desktop using penta pin screws (C) at either location 1 or 2. Tighten
securelywith penta pin driver (D).
Note: Use Nylon cap covers (F) with penta pin screws (C) when using hole 1 of back lockdown bracket (B)
as shown in detail 4.
B
F
C
B
1
2
TVSTAND
DETAIL 4
NOTE: Back lockdown bracket (B) may be placed with flange facing up to allow the screen to be positioned further forward
asshown below.
BACK EDGE OF DESK