Pelican Predator 103 User manual

IP1297-2
Fishingboat

MODEL SHOWN: PREDATOR 103
Welcome!
Thank you for choosing a Pelican fishing boat. This craft was built
according to stringent quality standards and with our 40 years of
acquired expertise. We hope your experience with our product
will be pleasant and rewarding. Please take some time to read
the content of this manual so that you may draw maximum
satisfaction from the product. We believe Pelican fishing boats offer
incomparable value. We hope that you will take full advantage of
your recent purchase.
Antoine & Christian Elie
1000 Place Paul-Kane, Laval
Québec, Canada H7C 2T2
1.800.463.6960
PELICANSPORT.COM
2

IMPORTANT INFORMATION
• Model
• Date of purchase
• Dealer name
• Registration no.
• Province / State
• Model no.
• Serial no. ZEP
HOW TO LOCATE THE SERIAL NUMBER OF YOUR CRAFT
LThe serial number is located on the outside of the hull in the back
right-hand corner. The number starts with ZEP and is twelve (12)
digits long. Example: ZEP12345A678
INDEX
• Your Fishing Boat
• Getting Started
• Materials / Manufacturing
• About your Fishing Boat
• Transportation
• Pre-Launch Checklist
• Launching Procedure
• Mooring / Docking
• Trim Adjustments
• Storage
• Care and Maintenance
• Troubleshooting
• Safety Precautions
• Extended Limited Warranty
• Assignment
• Manufacturer’s Declaration of Origin
• Fishing Boat Description
• Warranty Registration Card
• Fishing Boat Accessories
4
5
5
6
6
6
6
7
7
7
7
8
8
10
11
12
12
13
14
3

YOUR FISHING BOAT
Take some time to learn about the various
components of your fishing boat.
Note: Not all models include or come
equipped with all the parts shown.
MODEL SHOWN: PREDATOR 103
Livewell with aerator
12V electrical outlets
Tank and battery
compartment
Tackle compartment
Vertical rod holder
Bottle holder
Built-in
motor mount
Built-in
motor mount
4

MATERIALS / MANUFACTURING
Your boat is made of Ram-X™. Its great flexibility offers exceptional
shock resistance. This flexibility increases with heat or with the craft’s
prolonged exposure to the sun but may also slightly warp the hull. The
warping disappears when the hull cools and never affects the craft’s
performance.
Ram-X™ is a superior material that was developed and registered
in 1978. It quickly became the benchmark of quality in the industry
thanks to its shock resistance and ability to regain its initial shape
following an impact. Widely hailed by consumers, Ram-X™ is a step
above other materials used in the industry.
GETTING STARTED
Please read all the instructions in this owner’s manual. Keep this
manual in a safe place for future reference if necessary. The manual
consists of:
1- Important information
There is a space provided at the beginning of the manual to record
important information about your boat (page 3). This information will come
in handy if you need to contact our customer service department.
2- Warranty registration card
As outlined in the warranty section (page 10), you can register your
warranty online at our website (www.pelicansport.com) or by mail
by filling out and returning the registration card. You can find the
registration card in the center of this manual. (page 13).
3- Manufacturer’s Declaration of Origin
Certain governments require a Manufacturer’s Declaration of Origin to complete
the registration. The declaration is located in the center of this manual (page 12).
5

ABOUT YOUR FISHING BOAT
1. There is a capacity sticker on every boat. These capacity ratings should be respected
at all times for your safety and security.
2. Sturdy polystyrene foam blocks are located between the hulls for optimum safety. Do
not remove them as they are for extra flottation.
3. Some larger boat models have wood reinforcement between the deck and hull, and
all boats are reinforced with wood at the bow and stern, to provide you with the
support required in a small fishing boat.
4. All fasteners or mounting hardware are either made of stainless steel or anodized
aluminum.
5. Always distribute weight evenly when using the boat in order to attain the highest
performance.
TRANSPORTATION
1. Do not use handles to secure boat for transport.
2. We recommend a bunk trailer as keel rollers could eventually dent the hull.
3. Respect the load recommendations that the trailer is built for.
4. Your boat is very light so be sure to calculate total weight of motor if applicable plus
boat, plus gear, before trailering to avoid any unnecessary bouncing of your boat on
larger trailers.
5. Insure that boat is properly secured to trailer.
6. Remove swivel seats, livewell and battery compartments, and any other accessories
before trailering to avoid loss or damage.
PRE-LAUNCH CHECKLIST
1. Transom drain plug securely in place.
2. All other drain plugs are securely in place.
3. All passengers must wear an approved Personal Flotation Device (PFD). Insist that
children wear a certified Personal Flotation Device that is the right size.
4. Emergency paddle(s) or oar(s) are on board.
5. There is enough fuel aboard.
6. Motor(s) and battery are in good order.
7. No condensation has accumulated between hull and deck.
8. There is an emergency kit (extinguisher, horn, extra fuses, first aid kit, etc.) aboard.
9. All weight is properly distributed.
10. Check that all accessories are properly installed.
LAUNCHING PROCEDURE
MAKE SURE THAT:
1. All drain plugs (especially the rear drain plug) are securely in place.
2. All straps or tie-downs have been removed.
3. Outboard motor has been tilted upwards before sliding boat off of trailer.
4. You step into the center of the boat when boarding, to assure the boat remains stable
(never board by stepping onto the rubrail).
5. Never drag over rocks or sharp objects as this could damage the hull.
6. Always wear a certified Personal Flotation Device (PFD).
6

MOORING / DOCKING
1. Always moor the boat away from rocks and sharp objects.
2. Make sure the motor is raised.
3. Always moor in water sufficiently deep to avoid damaging the hull.
4. Never moor the boat against a dock that is not equipped with hull-protecting bumpers
TRIM ADJUSTMENTS
1. Different load conditions may require different trim angle settings. When the drive
unit (propeller) is closet to the transom, it will tend to push the bow down when
power is applied. If the bow digs excessively into the water, shift some of the weight
to the stern and / or move the propeller further away from the transom. On the
contrary, if the propeller is too far from the transom, the bow will rise excessively
when power is applied. In this case, move some weight forward in the boat and / or
bring the propeller closer to the transom.
2. Performance depends on the relation between proper weight distribution, trim angle
and engine horsepower.
STORAGE
SHORT TERM
1. Insert weather caps in the bow and stern trolling motor sockets.
2. Boat equipped with a navigational stern light; insert a weather cap in the light base.
LONG TERM
1. Pull the boat out of water.
2. Remove the drain plugs and stand the boat on its bow to remove any water accumulation.
3. Remove motor, fuel tank(s), battery, swivel seats, cushions, oars or paddles and all
other accessories, empty livewell completely and store these pieces properly.
4. Set the boat upside down on a level ground.
5. Cover the boat with a trap or canvas.
6. Never store the boat on sawhorses or comparable supports.
7. Avoid prolonged, unnecessary exposure to the sun, as this may damage the boat cosmetics.
CARE AND MAINTENANCE
The best way to clean your boat is to wash it with lukewarm water and mild soap. Do not
use harsh abrasives. Regular cleaning will keep your boat looking like new. Never attempt
to paint the boat because it will not stick to the hull.
MODELS EQUIPPED WITH AERATOR PUMP (LIVEWELL):
1. The removable pump sits at the bottom of the livewell on a removable filter which in turn
is snapped onto the base. To access the pump and clean the filter simply twist the filter ¼
turn counterclockwise. The filter will snap out of the base and expose both the filter and the
pump for servicing and cleaning. To reassemble, align filter with base and twist the filter ¼
turn clockwise to snap in place.
2. Check to make sure the butt connectors for the wire that leads to the pump are up and out
of water.
CAUTION
Some water may accumulate between the hull and deck due to
rain, extended wave action, or condensation. This is not a defect. To
drain, remove the drain plug (located at the bow under the rubrail)
and tip the boat on its bow.
7

TROUBLESHOOTING
MODEL EQUIPPED WITH LIVEWELL ONLY:
Livewell pump does not work.
1. Check that the wires are connected properly and securely.
2. Check the fuse(s).
3. Check the battery connections.
4. Check if the battery is dead.
ALL MODELS:
Accessories plugged into the bow and / or stern sockets do not work.
1. Make sure the accessory is plugged correctly.
2. Check the fuse(s).
3. Check the battery connections.
4. Check if the battery is dead.
5. Check if the accessory is functioning properly.
THE BOAT WILL NOT DRAIN:
Make sure the drain(s) is (are) not blocked.
SAFETY PRECAUTIONS
WARNING
We suggest that you read the information below before using the
boat. Failure to follow the warnings / precautions below may lead to
serious injury or death.
1- Weather and water conditions
Check the weather and water conditions before you go boating. Your boat is
designed to be used only in sheltered waters, lakes, and slow moving streams.
It is not designed for whitewater use. Never go paddling in severe winds,
rain, thunderstorms, choppy waters, strong currents, flood waters, or where
tides will seriously affect your ability to steer the boat or return to shore.
2- Every passenger should always wear a Coast Guard approved
Personal Flotation Device (PFD) when using this boat.
Before going boating, read the PFD manufacturer’s information pamphlet regarding
the PFD and thoroughly familiarize yourself with how the PFD is to be worn.
3- Never use or consume alcohol, drugs, or any other substance
that may affect your coordination, judgment or ability to safely
operate the boat.
4- Sound device
The Coast Guard requires boaters to have a means of signaling other boaters
of their presence. You should keep a sound device in the boat with you at all
times. If possible, attach the sound device to your Personal Flotation Device.
8

5- Never stand up in the boat
Standing up in the boat may cause it to capsize. If the boat should capsize, please note
that, in most cases, it is far more dangerous to attempt to swim to shore than to stay
with the boat.
6- Never exceed your ability
Honestly assess your physical capability as to how far and how long you can paddle
and swim.
7- Slippery when wet
The hull material is extremely slick when wet. Always wear slip-resistant shoes and
stay in the center of the boat.
8- Hypothermia
Boating accidents in cold water are very dangerous. Hypothermia, the loss of body heat
due to immersion in cold water, can be deadly. Survival time can be as short as
15 minutes in 35°F (2°C) water. Dress appropriately for weather conditions, wearing a
wet or dry suit if necessary.
9- Never paddle alone
It is best to have someone with you in case of an emergency or accident. Also, always
tell someone your boating plans, including where you are going, how long you’ll be
gone, and how many people you’ll be with.
10- Never allow minors to use this boat without adult supervision.
11- Always familiarize yourself with the body of water where you
will be paddling.
Learn what hours boating is permitted, whether there are any known hazardous
conditions, and where you can get help quickly in case of emergency or accident.
12- Always abide by all Coast Guard regulations and State and local
laws, regulations, ordinances, and rules concerning boating and
boating safety.
Check with the Coast Guard and State and local authorities concerning proper boat
handling and the proper equipment to be carried on board, such as lights and
sound-producing devices.
13- Drain plugs
Check that the drain plug(s) of the boat is (are) securely in place before launching
the boat. You should drain the space between the deck and the hull of any water
accumulated through condensation or seepage.
14- Motor
Never use a motor larger than rated on capacity tag displayed on the boat. Follow
instructions that come with motor. Handle gasoline with extreme care. Avoid sudden
maneuvers which could cause loss of control, and capsizing, or passengers to fall from
the boat.
15- Weight capacity
Review the passenger and weight capacity limitations. Ensure the loading will be
within these limits. Proper distribution of weight is necessary to ensure proper balance
(trim) and performance. Each boat has capacity tag clearly displayed on the craft.
16- Emergency paddle(s)
Always bring an emergency paddle or oar on board.
9

EXTENDED LIMITED WARRANTY
Your boat is built of superior materials and in accordance to stringent quality standards.
With adequate maintenance, it will give you years of reliable use. But as with most
such products, it is subject to wear and tear. If you eventually need replacement parts,
technical assistance or product / service information, please contact our Customer Service
Department (1-888-669-6960), having ready at hand the product’s model name and
serial number ZEP, as well as the date and place of purchase.
The present warranty is only valid if the original buyer registered the warranty within the
thirty (30) day period immediately following he date of purchase. Registration can be
done either electronically via our website (www.pelicansport.com), or by completing and
returning the accompanying registration card (page 13).
Pelican International Inc.’s warranty is valid only if the product is used for its intended
purposes and for which it was designed.
Product component parts and accessories are warranted for a period of one (1) year from
the date of purchase against defects in workmanship and / or materials. The hull and deck
are warranted for a period of one (1) year from the date of purchase against defects in
workmanship and / or materials and suitable for its intended purpose. Only by returning
your warranty and registration card on time will you extend your hull and deck warranty to
two (2) years.
This warranty does not cover:
a)boats used for rental or other commercial use
b)products that have been damaged by negligence, misuse or accident, or wear due to
owner’s failure to provide reasonable and necessary maintenance
c)products which have been modified or repaired by unauthorized persons
d)change in appearance of boat due to wear, exposure or any other environmental
condition
During the warranty period Pelican International Inc. is obliged only to repair or replace,
at its discretion, the above mentioned parts, at either its manufacturing plant, or at
an authorized dealer store or service center, as decided by Pelican International Inc.
Transportation costs back to the appointed place of repair or replacement are at the
expense of the consumer. Pelican is not responsible for any damages incurred in transport,
for storing or transportation fees, nor for inconvenience or loss of time or money while
repairs are being made.
Any return or repair of boats must be accompanied by an authorization number obtained
by your dealer and which can only be issued by calling Pelican’s Customer Service
Department between 9 am and 5 pm Eastern Standard Time at 1-800-463-6960. The
return of any Pelican boat will not be accepted by Pelican International Inc. without this
authorization number.
This warranty is the sole and exclusive warranty by Pelican International Inc. in connection
with its above mentioned boats and Pelican International Inc. makes no warranties or
representations, expressed or implied (including warranties of merchantability and of fitness
for a particular purpose) in such connection except as specifically set in this warranty.
All incidental and / or consequential damages are excluded from
this warranty. Implied warranties are limited to the life of this
warranty. Some states do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may
not apply to you. This warranty gives you special legal rights, and you
may also have other legal rights which may vary from state to state.
10

FIRST ASSIGNMENT
For value received, the undersigned hereby transfers this Statement of Origin
and the boat described therein
to
and certifies that the boat is new and has not been registered in this or any
other state(s); he also warrants the title of said boat at time of delivery, subject
to the liens and encumbrances, if any, as set out below:
Dated At
By
Before me personally appeared
who by me being duly sworn upon oath says that the statement set forth above
is true and correct.
Subscribed and sworn to before me this day of Year
, Notary Public.
Date Commission Expires
SECOND ASSIGNMENT
For value received, the undersigned hereby transfers this Statement of Origin
and the boat described therein
to
and certifies that the boat is new and has not been registered in this or any
other state(s); he also warrants the title of said boat at time of delivery, subject
to the liens and encumbrances, if any, as set out below:
Dated At
By
Before me personally appeared
who by me being duly sworn upon oath says that the statement set forth above
is true and correct.
Subscribed and sworn to before me this day of Year
, Notary Public.
Date Commission Expires
Name Name
Address Address
Amount of Lien Amount of Lien
To Whom Due To Whom Due
Date Date
Transferor (Firm name) Transferor (Firm name)
Address Address
Sign here Position Sign here Position
Seal Seal
11

The manufacturer further certifies that this was the first transfer of said new boat in ordinary trade and commerce, and that all information given herein
is true and accurate to the best of his knowledge.
Name of manufacturer: Pelican International Inc., 1000 Place Paul-Kane, Laval (Quebec) Canada H7C 2T2
Authorized by:
MANUFACTURER’S DECLARATION OF ORIGIN
Sold in the State / Province of
The undersigned manufacturer hereby certifies that the new boat
described below, the property of said manufacturer, has been
transferred on this
day of ,
on invoice no.:
to:
• Dealer name
• Address
• City
• State / Province
• Zip / Postal Code
Christian Elie, President
FISHING BOAT DESCRIPTION
• Serial number: ZEP
• Model year:
• Model name:
•Length:
Built for pleasure use
12

IMPORTANT
To validate the warranty, proceed to its registration within the thirty (30) days
immediately following the product’s purchase date.
Registration can be done electronically via our website (www.pelicansport.com).
You can also complete and return the present registration card to the following address:
Customer Service, Pelican International Inc.
1000 Place Paul-Kane
Laval (Quebec) Canada H7C 2T2
WARRANTY REGISTRATION CARD
Date of Purchase: Model: Serial number: ZEP
Dealer / Store Name:
Dealer / Store Address:
State / Province: Zip / Postal Code: Country:
Mr. Mrs. Ms.
Surname: Name:
Address:
State / Province: Zip / Postal Code: Country:
Telephone Number: ( ) E-Mail:
Product registration
13

Fishing Boat Accessories
Visit www.lavikasport.com
to learn more about the purchase of these - and more - accessories.
Deluxe folDing seat
PS0651-00
MoDifieD V hull boat coVer
PS0662-00
f12V electric Male plug
PS0091-00
Deluxe paDDeD
folDing seat
PS0650-00
seat swiVel MechanisM
PS0659-00
transoM Drain plug
PS0330-00
seat bracket
anD harDware
PS0499-1-00
Deluxe boat sponge
PS1373-00
14