Percussion Play Emperor Chimes User manual

Ground Fixed
2.Excavate 6 holes for
Emperor chimes 200mm
diameter by 800mm deep
in desired location upon
decision from customer.
3. Locate (lower) legs into
holes making sure they are
vertical and level prior to
concreting in place.Chimes
should be 100mm from
ground surface.
4. Once happy with location
of the chimes, fill holes
using rapid hardening
concrete. Be sure to
compact concrete around
legs and leave to dry
according to manufactures
guidelines.
600mm
100mm
1785mm
2490mm
Ground
Surface
Installation Instructions
M10x200 Bolt
x12
M10 Nut
x24
M10 Barrel Nut
x6
M10x70 Security Screw
x6
Ground Fix
Components:
1. Attach Ground Fixing
posts to legs(1.2) (See
Ground Fix Post Installation
Sheet)
110 Kg
Install Instrument
with 1m free space
(from widest point)
around it.
1.5m
1.5m
1.5m
Spares available form
percussionplay.co.uk or from
your local distributor
Played with hands
Instrument
Components:
Emperor
Chimes
are pre-
assembled
Emperor Chimes
Page 1 of 2
Weight of heaviest part kg (XL Chime)
BS EN 1176

Ground Fixed
Ground Fix Post Installation
(1.1)
Insert M10x 150 Threaded
bar into pre drilled holes
in Ground Fixing Post
Fix M10x 150 Threaded
bar in place using M10
Nuts
Excavate 6 holes with a
250mm diameter tapering
down to 350mm diameter
and 650mm depth
Compact base of hole with
50mm of aggregate.
Lower ground Fix post
attached to instrument
into hole (check
instrument straight and
level before filling with
concrete)
Fix hole with fast drying
concrete to manufacturers
specifications.
Locate the Ground fix Post
into the leg of the
instrument.
Fix instrument to Ground
fix post using M10 bolt
and Barrel Nut and use
thread locking solution
to prevent fixings working
loose.
Chime base is 100mm
from ground surface
100
650
50
350
250
Aggregate
Concrete
1 2 3
5 6
600mm max depth
7
4
M10x200 Threaded Bar
x12
M10 BZP Nut
x24
M10 Barrel Nut
x6
M10x70 Security Screw
x6
Components:
Emperor Chimes
Page 2 of 2
Ground fix tube
protrudes 200mm
from ground surface
that inserts into the
base of the chime
post
TX 45 Driver Bit
Tools:
x1
BS EN 1176