Percussion Play Papilio Bells User manual

Ground Fixed
5. Once happy with location of
the Instrument, fill hole using
rapid hardening concrete. Be
sure to compact concrete
around legs and leave to dry
according to manufactures
guidelines, making sure to
leave jig in place until set.
2. Use wooden jig to mark out
hole positions for each of the 3
legs in desired location upon
decision from customer. .
3.Excavate 3 holes for the
Steel legs 250mm diameter by
400mm deep. (See GF Post
Installation Sheet)
4. Locate (lower) legs into
holes making sure they are
vertical and level and use jig
to check positioning
1. Attach M10x150 Bar and
Nuts to each of the 3 Legs.
(1.1) (See Assembly Guide)
400mm
Ground Surface
1110
Installation Instructions
(1.1)
Instrument
Components:
M10x150 Bolt
x6
M10 Nut
x12
Ground Fix
Components:
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
Papilio Bells
Page 1 of 3
Weight of heaviest part 13kg (Notes)
BS EN 1176
36 Kg
M8 Barrel Nuts
x8
(1.1)
6. Once concrete has set,
remove wooden jig and install
notes using M8 Barrel nuts
provided. Finally install
beaters using fixings provided.
(See Assembly Guide)
M6x20mm
Secure Screw
X8
Eye Straps
X4
Pair Small Red
Beaters X4
Metric Conversion:
250mm/ 10”
400mm/ 16”
1110mm/ 44”
1.5m/ 59”
CAUTION: Papilio
surface can get hot
in direct sunlight, if
possible install in
shaded areas.
Spares available form
percussionplay.com or from your
local distributor

M10 Nut X12
M10x150 Threaded Bar X6
COMPONENTS LIST:
Saddle Strap X4
M6x20 Pin torx X8
M8 Barrel Nut Pin torx X8
Ground Fixed
Instrument
Components:
Assembly Guide PPBUTR
(1.1)
Ground Fix
Components:
M8 Barrel Nuts
x8
M10x200 Bolt
x6
M10 Nut
x12
Papilio Bells
Page 2 of 3
BS EN 1176
15 Kg
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Pair Small Red
Beaters X4
M6x20mm
Secure Screw
X8
Eye Straps
X4
TX 30 Driver Bit
x1
TX 40 Driver Bit
Tools:
x1
CAUTION: Papilio
surface can get hot
in direct sunlight, if
possible install in
shaded areas.
Spares available form
percussionplay.com or from your
local distributor

Ground Fixed
Components:
Ground Fix Post Installation
M10x150 Bolt
x6
M10 Nut
x12
Insert M10x150 Threaded
bar into pre drilled holes
in Ground Fixing Post
Fix M10x150 Threaded
bar in place using M10
Nuts
Fill hole with fast drying
concrete to manufacturers
specifications.
450
50
350
250
Aggregate
Concrete
Excavate a hole with a
250mm diameter tapering
down to 350mm diameter
and 450mm depth
Compact base of hole with
50mm of aggregate.
Lower ground Fix post
attached of instrument
into hole (check
instrument straight and
level before filling with
concrete)
(1.1)
1 2 3
4 5
400mm min depth
Papilio Bells
Page 3 of 3
BS EN 1176
Foundations should not present a hazard. These foundations are recommended as a guide,
for more information on foundation details for various surface see Part 7 of BS EN 1176.
Repeat 1-5 for all 3 legs
Metric Conversion:
50mm/ 2”
250mm/ 10”
350mm/ 14”
400mm/ 16”
450mm/ 18”