Percussion Play Rainbow Trio Metallophone User manual

1. Attach the steel legs to the
base of the instrument with
the M8 Nyloc Nuts and 2 part
security caps. (1.1) (See
Assembly Guide)
Ground Fixed
KS2 - 300mm
Ground Surface
KS2 850mm
KS1 - 450mm
Installation Instructions
(1.1)(1.1) (1.2)
M10x200 Bolt
x2
M10 Nut
x4
6. Attach the 1 pair of beater
to the saddle strap on the leg.
(1.3)
Ground Fix
Components:
Instrument
Components:
(1.3)
19.5 Kg
2. Attach Ground Fixing posts
to legs(1.2) (See Ground Fix
Post Installation Sheet)
5. Once happy with location
of the Instrument, fill holes
using rapid hardening
concrete. Be sure to compact
concrete around legs and
leave to dry according to
manufactures guidelines.
3.Excavate 1 hole for the
Steel legs 250mm diameter
by 350-500mm deep
depending on Key stage, in
desired location upon
decision from customer.
4. Locate (lower) legs into
holes making sure they are
vertical and level prior to
concreting in place.
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
Pair Small Red
Beaters X1
BS EN 1176
Metric
Conversion:
250mm/ 10”
300mm/ 12”
450mm/ 18”
700mm/ 28”
850mm/ 33”
1.5m/ 59”
Spares available from
percussionplay.com or from your
local distributor
KS1 700mm
Rainbow Trio
Metallophone
Page 1 of 3
M6x20 Security Screw
x2
M6 Saddle Strap
x1
2 Part Cover
Cap
x4
M8x20 Security Screw
x4
Weight of heaviest part 7kg (Metallophone)

PPRMET SIDE
COMPONENTS LIST:
2 Part Cover Cap X4
M10 Nut X4
M10x200 Threaded Bar X2
Saddle Strap X1
M6x20 Pin torx X2
PPRMET FRONT
M8x20 Pin torx X4
Ground Fixed
Assembly Guide PPSANS
(1.1)
M10x200 Bolt
x2
M10 Nut
x4
Ground Fix
Components: 19.5 Kg
Pair Small Red
Beaters X1
BS EN 1176
Instrument
Components:
TX 30 Driver Bit
x1
TX 40 Driver Bit
x1
Tools:
Spares available from
percussionplay.com or from your
local distributor
Rainbow Trio
Metallophone
Page 2 of 3
M6x20 Security Screw
x2
M6 Saddle Strap
x1
2 Part Cover
Cap
x4
M8x20 Security Screw
x4

Ground Fixed
Components:
Ground Fix Post Installation
M10x200 Bolt
x2
M10 Nut
x4
BS EN 1176
Insert M10x 200 Threaded
bar into pre drilled holes
in Ground Fixing Post
Fix M10x 200 Threaded
bar in place using M10
Nuts
Fill hole with fast drying
concrete to manufacturers
specifications.
350
50
350
250
Aggregate
Concrete
Excavate a hole with a
250mm diameter tapering
down to 350mm diameter
and 350mm depth
Compact base of hole with
50mm of aggregate.
Lower ground Fix post
attached of instrument
into hole (check
instrument straight and
level before filling with
concrete)
(1.1)
123
4
300mm min depth
5
Foundations should not present a hazard. These foundations
are recommended as a guide, for more information on
foundation details for various surface see Part 1 of BS EN 1176.
Metric Conversion:
50mm/ 2”
250mm/ 10”
300mm/ 12”
350mm/ 14”
400mm/ 16”
450mm/ 18”
Rainbow Trio
Metallophone
Page 3 of 3