Percussion Play Ground Fixed Grand Marimba User manual

Ground Fixed
Installation Instructions
Instrument
Components:
Pair Large Red
Beaters X2 48 Kg
Grand Marimba
Page 1 of 3
BS EN 1176 M10x200 Bolt
x4 x8
Ground Fix
Components:
M10x30 Security Screw
x4
3.Excavate 4 holes for the
Steel legs 250mm diameter by
400-550mm deep depending
on Key stage, in desired
location upon decision from
customer.
4. Locate (lower) legs into
holes making sure they are
vertical and level prior to
concreting in place.
Weight of heaviest part 40kg (Grand Marimba)
KS1,2
KS2 - 400mm
KS1 - 550mm
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m 1.5m
1.5m
1.5m
1. Attach the steel legs to each
end of the instrument with the
M10x30 security screws. (1.1)
(See Assembly Guide)
2. Attach Ground Fixing posts
to each of the legs (See Ground
Fix Post Installation Sheet)
5. Once happy with location of
the Instrument, fill holes using
rapid hardening concrete. Be
sure to compact concrete
around legs and leave to dry
according to manufactures
guidelines.
10x3/4
Secure Screw
X4
Metric Conversion:
250mm/ 10”
400mm/ 16”
550mm/ 22”
1.5m/ 59”
Spares available form
percussionplay.com or from your
local distributor

PPGRAM FRONT
PPGRAM SIDE
M10 Nut X8
M10x200 Threaded Bar X4
COMPONENTS LIST:
10x3/4 Pin torx Screw X4
M10x30 Pin torx X4
Saddle Strap X2
saddle straps for beaters attach to
underside of Grand Marimba body
Ground Fixed
Assembly Guide PPGMAR
10x3/4
Secure Screw
X4
Instrument
Components:
Pair Large Red
Beaters X2 48 Kg
Grand Marimba
Page 2 of 3
BS EN 1176 M10x200 Bolt
x4 x8
Ground Fix
Components:
M10x30 Security Screw
x4
TX 25 Driver Bit
x1
TX 45 Driver Bit
x1
Tools:
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Spares available form
percussionplay.com or from your
local distributor

Insert M10x 200 Threaded
bar into pre drilled holes
in Ground Fixing Post
Fix M10x 200 Threaded
bar in place using M10
Nuts
Fill hole with fast drying
concrete to manufacturers
specifications.
450
50
350
250
Aggregate
Concrete
Excavate a hole with a
250mm diameter tapering
down to 350mm diameter
and 450mm depth
Compact base of hole with
50mm of aggregate.
Lower ground Fix post
attached of instrument
into hole (check
instrument straight and
level before filling with
concrete)
Ground Fixed
Components:
Ground Fix Post Installation
(1.1)
M10x200 Bolt
x4
M10 Nut
x8
Duplicate points 1-5. Grand Marimba
requires 4 Ground Fix Posts
TX 45 Driver Bit
Tools:
x1
BS EN 1176
Grand Marimba
Page 3 of 3
Thread Lock Solution
Required (Not Supplied)
Foundations should not present a hazard. These foundations are
recommended as a guide, for more information on foundation
details for various surface see Part 7 of BS EN 1176.
(1.1)
1 2 3
4 5
400mm min depth
Metric Conversion:
50mm/ 2”
250mm/ 10”
350mm/ 14”
400mm/ 16”
450mm/ 18”