Percussion Play PPMIRC User manual

Instrument
Components: KS1,KS2
KS2 - 850mm
Ground Surface
KS1 - 700mm
Installation Instructions
20 Kg
4. Once all mounts are fixed
in place attach the notes
using M8 Barrel Nuts and Pin
torx bit.
1. Mark hole positions on wall,
then drill to manufacturers
specified diameter and depth
of M10 rawl bolt (See Wall Fix
installation sheet)
2. Once holes are drilled
insert M10 rawl bolts into
holes and set in place to
secure tightly
3. Attach wall mounts onto
rawl bolts making sure they
are tight to the wall and have
the large holes to the outside.
Use a long tool to tighten
further.
1m
1 Small Red and
1 Large Red
Weight of heaviest part 18kg (Mirror Chimes)
BS EN 1176
Wall Fixed
M8x30 Barrel Nut
x4
Mirror Chimes
Page 1 of 3
Wall mounts
x4
1m
1m
Install Instrument with 1m free space (from widest point) around it.
Wall fixings are not supplied, installer will select suitable
method of fixing. Suggested Fixing M10 Rawl Bolt
Metric Conversion:
700mm/ 27 9/16”
850mm/ 33 15/32”
1m/ 39 3/8”
CAUTION: Chime
surface can get hot
in direct sunlight, if
possible install in
shaded areas.
Spares available from
percussionplay.com or from your
local distributor

Wall Fixed
Instrument
Components:
Assembly Guide PPMIRC
M8x30 Barrel Nut
x4
20 Kg
Pair Small Red
Beaters X1
Mirror Chimes
Page 2 of 3
TX 40 Driver Bit
x1
Tools:
BS EN 1176
COMPONENTS LIST:
M8 Barrel Nut Pin torx X4
Wall mounts
x4
Wall fixings are not supplied, installer will select suitable
method of fixing. Suggested Fixing M10 Rawl Bolt
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
CAUTION: Mirror
Chimes surface can
get hot in direct
sunlight, if possible
install in shaded
areas.
Spares available from
percussionplay.com or from your
local distributor

Wall Fix Installation
(1.1)
TX 45 Driver Bit
Tools:
x1
BS EN 1176
Wall Fixed
Instrument
Components:
M8 Barrel Nut
x4
Mirror Chimes
Page 3 of 3
Wall mounts
x4
1. Mark hole positions . 2. Drill holes .
3. Fit wall mounts . 4. Attach notes .
Metric Conversion:
1290mm/50 25/32”
1298mm/51 7/64”
1364mm/ 53 45/64”
590mm/ 23 1/4”
295mm/ 11 5/8”