Percussion Play PPCONG User manual

Surface Fixed
2. Attach Surface Fixing posts to
legs(1.2) (See Ground Fix Post
Installation Sheet)
1. Attach the steel leg to each
of the congas with the
M10x30 security screws,
square washers and PU
mounts. (1.1) (See Assembly
Guide)
Ground Surface
S,M,L
Small –800mm
Medium –800mm
Large- 800mm
Installation Instructions
(1.1)
Instrument
Components:
M10x30 Security Screw
x4
M10x50x3 Square washer
x4
Surface Fix
Components:
PU 200 Mount
PU 250 Mount
x2
x2
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
Played with hands
Congas
Page 1 of 2
Weight of heaviest part 3.8kg (Large drum Small Congas)
Weight of heaviest part 4.5kg (Large drum Medium Congas)
Weight of heaviest part 5.2kg (Large drum Large Congas)
BS EN 1176
14.8 Kg
15 Kg
20 Kg
M10 Barrel Nut
x1
M10x70 Security Screw
x1 Ground Anchors
not supplied
4. Fix to Surface using
recommended ground
anchors not supplied
3.Locate Plate in desired
location and mark holes to fix
to desired surface.
5. Make sure all fixings are
covered and secure using
cover caps provided
2 Part Cover Cap
x4
(1.2)
Metric Conversion:
800mm/ 31”
1.5m/ 59”
Spares available form
percussionplay.com or from your
local distributor

PPCONG FRONT PPCONG SIDE
PPCONG PLAN
M10x30 Pin torx X4
M10x50x3 square washer X4
COMPONENTS LIST:
PU MOUNT 200 X2
PU MOUNT 250 X2
M10x70 Pin torx X1
M10 Barrel Nut Pin torx X1
Surface Fixed
Instrument
Components:
Assembly Guide PPCONG
(1.1)
Surface Fix
Components:
M10x30 Security Screw
x4
M10x50x3 Square washer
x4
200 Mount
250 Mount
x2
x2
Played with hands
Congas
Page 2 of 2
TX 45 Driver Bit
Tools:
x2
BS EN 1176
14.8 Kg
15 Kg
20 Kg
M10 Barrel Nut
x1
M10x70 Security Screw
x1 Ground Anchors
not supplied
2 Part Cover Cap
x4 Spares available form
percussionplay.com or from your
local distributor
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)