Percussion Play Ground Fixed Marimba User manual

Ground Fixed
1.1
1.3
1.2
1.4
1. Assemble frame and notes
as shown in images 1.2, 1.3
and 1.4(see Assembly Guide)
5. Once happy with location
of the Marimba, fill holes
using rapid hardening
concrete. Be sure to compact
concrete around legs and
leave to dry according to
manufactures guidelines.
2. Using M10 nuts and
200mm bolts supplied locate
through pre drilled holes and
secure bolts in place to
support in ground pole in
concrete. 3 Bars per leg at
120 degree angles. (1.3)
3.Excavate 2 holes for the
Marimba legs 250mm
diameter by 300mm deep in
desired location upon
decision from customer.
4. Locate (lower) legs into
holes making sure they are
vertical and level prior to
concreting in place.
KS2 - 300mm
Ground Surface
KS1,2,
KS1 - 400mm
KS1 –650mm
KS2 –750mm
Installation Instructions Flat Pack
M10x200 Bar
x6 x12
Ground Fix
Components
:M10 Nut
42 Kg
Pair Large Red
Beaters X2
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
1.5m
1.5m
Marimba
Page 1 of 3
Weight of heaviest part 15kg (Notes)
BS EN 1176
Metric
Conversion:
250mm/ 10”
300mm/ 12”
400mm/ 16”
650mm/ 26”
750mm/ 30”
1.5m/ 59”
Instrument
Components:
x2
M8 Barrel Nut
x4
M8 Square
Nut X4
M6x20 Security Screw
x4
M6 Saddle Strap
x4
M8x60 Security Screw
Spares available from
percussionplay.com or from your
local distributor

Ground Fixed
Instrument
Components:
M8x60 Security Screw
x2
M8 Barrel Nut
x4
Assembly Guide PPMARI
M10x200 Bolt
x6
M10 Nut
x12
Ground Fix
Components: 42 Kg
M8 Square
Nut X4
Pair Large Red
Beaters X2
Marimba
Page 2 of 3
TX 40 Driver Bit
x1
TX 30 Driver Bit
x1
Tools:
BS EN 1176
Thread Lock Solution
Required
Thread Lock Solution
Required
Thread Lock Solution
Required
M6x20 Security Screw
x4
M6 Saddle Strap
x4
M10 Nut X12
M10x200 Threaded Bar X6
COMPONENTS LIST:
M8x60 Pin torx X4
M8 Barrel Nut Pin torx X4
PPMARI FRONTPPMARI SIDE
M8 Square nut X4
Saddle Strap X2
M6x20 Pin torx X4
M10 Nut X6
M10x200 Threaded Bar X3
Saddle Strap X3
M6x20 Pin torx X6
M8x60 Pin torx X2
COMPONENTS LIST:
Spares available from
percussionplay.com or from your
local distributor

250
350
350
If Marimba needs
to be positioned
lower a deeper
hole can be
excavated.
Excavate 2 holes with a
250mm diameter tapering
down to 350mm diameter
and 350mm depth
300
50
Compact base of each
hole with 50mm of
aggregate. Lower ground
the instrument into hole
(check instrument straight
and level before filling
with concrete)
Fill hole with fast drying
concrete to manufacturers
specifications.
300
50
Ground Fix Installation
(1.1)
1
2
3
M10x200 Threaded Bar
x6
M10 BZP Nut
x12
Components:
Ground Fixed
Marimba
Page 3 of 3
BS EN 1176
Foundations should not present a hazard. These foundations are recommended as a
guide, for more information on foundation details for various surface see Part 7 of BS EN
1176.
Metric Conversion:
50mm/ 2”
250mm/ 10”
300mm/ 12”
350mm/ 14”