Performance Tool W4003 User manual

WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS,
operating, and maintenance instructions contained on the product label and
instruction manual prior to operation of this tool. The owner/operator shall retain
product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or
warning labels and while in use, maintaining the unit in good working order. If the
owner and/or operator are not fluent in English, the product warnings and instructions
shall be read and discussed with the operators’ native language by the purchaser/
owner or his designee. Make sure that the operator comprehends its contents. Safety
information shall be emphasized and understood prior to usage. The tool shall be
inspected per the operating instructions.
Users of this tool must fully understand these instructions. Each person operating this
product must also be of sound mind and body and must not be under the influence of
any substance that might impair their vision, dexterity, or judgment. Protect yourself
and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service
department at: 1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
1 TON COMPACT HAND
POWER PULLER
OWNERS MANUAL
Stock Number W4003
On occasion, after printing of our literature is completed, our manufacturers may make
changes and/or modifications to merchandise which will not be reflected in this manual.
Although we strive to maintain complete and accurate information, it is possible in some
instances, that the product may differ slightly from printed specifications. Illustrations are
intended for reference only. Actual merchandise may vary. Wilmar is not responsible for
typographical errors.
Please read these instructions carefully and retain them for future use.
© Copyright 2016 WILMAR CORPORATION,
P.O. Box 88259 Tukwila, WA 98138
WARRANTY
PERFORMANCE TOOL extends only the following warranties, and only to original retail purchasers.
These warranties give specic legal rights. Except where prohibited by local law, the law of the State
of Washington governs all warranties and all exclusions and limitations of warranties and remedies.
There may be other rights which vary from state to state.
PERFORMANCE TOOL warrants the product to be free from defects in materials and workmanship
under normal use and service. A defective product may be returned for a free replacement within 90
days from the date of purchase, provided that product is returned to place of purchase immediately
after discovery of defect. After 90 days and up to 1 year from date of purchase, PERFORMANCE
TOOL will replace at no charge any parts which our examination shall disclose to be defective
and under warranty. These warranties shall be valid only when a sales receipt showing the date of
purchase accompanies the defective product or defective part(s) being returned. For part(s) after 90
days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
Exclusions:
These warranties exclude blades, bits, punches, dies, bulbs, fuses, grinding wheels, belts and other
consumables which must be replaced under normal use and service. These warranties shall not apply
to any product or part which is used for a purpose for which it is not designed, or which has been
repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these
warranties apply to any product or part which has been subject to misuse, neglect, accident or wear
and tear incident to normal use & service.
PERFORMANCE TOOL does not authorize any other person to make any warranty or to assume
any liability in connection with its products. Except for warranties of title and the limited express
warranties set forth above, PERFORMANCE TOOL makes no express or implied warranties of any
kind with respect to its products. In particular, PERFORMANCE TOOL makes no implied warranty of
merchantability and no implied warranty of tness for any particular purpose, except that for goods
purchased primarily for personal, family or household use and not for commercial or business use,
PERFORMANCE TOOL makes an implied warranty of merchantability (and, if otherwise applicable,
an implied warranty of tness for a particular purpose), but only for the particular qualities or
characteristics, and for the duration, expressly warranted above. The laws on limitation of implied
warranties may differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL shall not be liable for consequential, incidental or special damages resulting
from or in any manner related to any product, or to the design, use, or any inability to use the product.
The sole and exclusive remedy for a defective product or part shall be the repair, or replacement
thereof as provided above. The laws on limitation of remedies or on consequential, incidental or
special damages may vary from state to state, so the above limitations may not apply in all cases.
© Copyright 2016 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138

TECHNICAL DATA
Horizontal pulling capacity: 2200 lbs. (1000kgs)
Vertical lifting capacity: 1100 lbs. (500kgs)
Single line cable: 5mm X 6 ft.
Specifications are subject fo change without notice
OPERATION
SAFETY IMFORMATION
CAUTION: Make sure your hand power puller is maintained in safe and
proper working condition by observing the following rules.
1. Inspect cable regularly to examine the frays, broken strands
or distortion.
2. Do not pull cable over or around a corner.
3. Do not wrap cable around any object and hook it back on itself.
4. Do not overload; know how much load is allowed when you
are pulling.
5. Do not use a "cheater" pipe or other device to lengthen the handle
for additional leverage. This will destroy the puller itself.
6. Do not operate puller with less than 3 wraps of cable on the spindle.
7. Please do use an adequate sling, eyebolt or other accessory attached
to the load to be pulled. Make sure that there is a positive engagement
of the puller hook to the load.
8. DO NOT lift people or lift over people.
To extend cable:
Secure hook and pulley to a rigid anchor.
Depress drive pawl spring in direction of arrow at detail "A".
Raise handle and hold firmly in this position "C", then depress stop
pawl in direction of arrow at detail "D" and at the same time pull until
desired slack is obtained.
To raise load or apply tension:
Engage drive pawl and ratchet wheel by pushing pawl spring in
direction of arrow at detail "B". Each stroke of handle will wind cable to
pull load.
To release tension:
Depress pawl spring in direction of arrow at detail "A". Steadily push
handle until drive pawl pushes and disengages stop pawl to clear
ratchet teeth. This releases load one notch. Repeat this handle motion
as required to release tension a notch at a time.
CAUTION: When releasing load avoid abrupt handle movements. Apply
pressure to handle with an even and steady force.
DRIVE PAWL SPRING
DRIVE PAWL
RATCHET WHEEL
STOP PAWL RIGID ANCHOR POINT
ASSEMBLY
Easily Assembled Handle
1. Align the handle and receiver so the retention pin and hole are lined up.
2. Depress the retention pin then slide the handle into the receiver. Continue until
the retention pin engages in the receiver hole. The handle is now locked into
place and the puller is ready to use.
To remove the handle depress the exposed pin and pull the handle out of the
receiver. Store in blow molded storage case.
Handle
Retention Pin
Receiver Hole