Permobil Trost HD User manual

Tröst HD
Adjustable Long-Term Care Bed
Owner’s Manual

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
Version 1.0 December 2023 © Permobil 2023
This document may not be reproduced, copied or used for purposes
other than its intended use without the prior written consent of Permobil.
This manual includes installation instructions as well as important safety and
maintenance information for your Tröst Bed.
All information, pictures, illustrations and specifications are based upon the product
information available at the time this manual was created.
The information in this document is subject to change without notice.
ALL RIGHTS RESERVED
Technical and Customer Support
In the event of problems, contact your dealer or call
Permobil Canada 1-800-265-9830.
Be prepared to provide the bed serial number.
Spare parts and accessories may be ordered through your dealer.
Permobil Canada
2215/2221 46e Avenue •Lachine QC H8T 3C9
Tel.: [phone] •Fax: [phone]
www.permobil.ca
Permobil North American head office
300 Duke Drive •Lebanon TN 37090
Tel: [phone] • Fax: [phone]
www.permobilus.com
Permobil group head office
Permobil AB
Box 120 •861 23 Timra • Sweden
Tfn: [phone]
Fax: [phone]
E-mail: [e-mail]
www.permobil.com

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
Table of Contents
Introduction 1
Design and Functions ...................................................................................................................................1
Specifications.................................................................................................................................................2
Safety Precautions.........................................................................................................................................3
Bed Assembly 4
Ove rvie w .........................................................................................................................................................4
Inspection before unpacking ......................................................................................................................4
Damage during transport ........................................................................................................................5
Incorrect shipment....................................................................................................................................5
1 – Unpack the bed.......................................................................................................................................6
2 – Assemble the platform........................................................................................................................ 10
2.1 Remove cable ties............................................................................................................................ 16
2.2 Test the bed positions..................................................................................................................... 20
3 – Install optional rails ............................................................................................................................. 21
3.1 Install tall rails or half side rails ..................................................................................................... 21
3.2 Install full side rails .......................................................................................................................... 25
3.3 Install assist bar ................................................................................................................................ 31
4 – Install the headboard and footboard ............................................................................................... 34
5 – Connect the optional staff controller............................................................................................... 37
6 – Install the battery backup................................................................................................................... 41
7 – Prepare the bed for use ...................................................................................................................... 44
7.1 – Extend the bed width................................................................................................................... 45
7.2 – Install the optional length extender ......................................................................................... 46
7.3 – Install mattress retainers............................................................................................................. 47
7.4 – Install the bumper bar ................................................................................................................. 49
7.5 – Use the wheel directional limiters............................................................................................. 50

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
Optional Transport Trolley Assembly 51
Assemble the transport trolley................................................................................................................. 51
Use the transport trolley........................................................................................................................... 55
Bed Usage 58
Inspect the bed before use....................................................................................................................... 58
Move the bed into different positions.................................................................................................... 59
Safe operation ............................................................................................................................................ 60
Moving the bed ...................................................................................................................................... 60
Using side rails........................................................................................................................................ 60
User safety............................................................................................................................................... 60
Electrical safety ...................................................................................................................................... 60
Maintenance ............................................................................................................................................... 62
Cleaning................................................................................................................................................... 62
Regular inspection ................................................................................................................................. 62
Troubleshooting ......................................................................................................................................... 63
Warranty...................................................................................................................................................... 64
Returns ......................................................................................................................................................... 64

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual Design and Functions
www.pe rmobil.ca 1
Introduction
Design and Functions
The Tröst HD Bed is an electric adjustable bed designed for long-term care settings.
The Tröst HD Bed includes
•platform
•headboard and footboard
•electrical controller system
•hand pendant
•assembly hardware
•mattress retainers
The following optional parts are available at an additional cost:
•length extender
•tall side rails
•half side rails
•full side rails
•assist bar
•staff controller
•battery backup
•transport trolley
The platform disassembles into 2 parts for easy assembly, transport and storage.
HEADBOARD
OPTIONAL
SIDE RAILS
HAND
PENDANT
ELECTRICAL CONTROLLER
SYSTEM (UNDER BED)
FOOTBOARD

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
2www.pe rmobil.ca
Specifications
Size: 36" W, expandable to 42" and 48" W
(91 cm W, expandable to 107 cm and 122 cm W)
80" L with optional 4" length extension (80"-84")
203 cm L with optional 10 cm length extension (203 cm – 213 cm)
Weight capacity: Up to 750 lbs (340 kg)
Platform position:low: 7" (18 cm); high: 30" (76.2 cm)
Maximum Back Angle: 65 degrees ± 3 degrees
Maximum Knee Angle: 30 degrees ± 3 degrees
Electrical: 120V, 60 Hz
Additional electrical specifications are indicated on the motor.

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual Safety Precautions
www.pe rmobil.ca 3
Safe t y Precautions
Read and follow all instructions and warnings in this manual before assembling and
using the bed. Incorrect assembly or use may injure the user or damage the bed.
Permobil is not responsible for personal injuries or property damage resulting from
any person’s failure to follow the warnings and instructions in this manual.
Permobil is not responsible for injuries or damage resulting from failure to exercise
good judgment.
The final selection and purchasing decision about the type of electric bed to be used is
the responsibility of the user and his or her healthcare professional. Permobil is not
responsible for inappropriate selections of models or features or improper mountings
on the bed.
The safe weight capacity for this bed is in the specifications section in this manual.
Operation of the bed by users and equipment that exceeds the maximum allowable
weight can lead to personal injury and property damage, including damage to the bed,
as well as voiding any warranty applicable to the bed.
The Tröst HD Bed should not be used in the presence of flammable anesthetic gas
mixed with air, oxygen, or nitrogen oxide.

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
4www.pe rmobil.ca
BedAssembly
Overview
The Tröst HD Bed is designed for easy assembly, disassembly, and transport.
Two people are required to safely unpack the bed and put the bed together.
The general steps are as follows:
1 - Unpack the bed
2 - Assemble the platform
3 - Connect the electrical systems
4 - Install optional side rails or assist bar, if using
5 - Install the headboard and footboard
6 - Install optional staff controller, battery backup, or length extender, if using
7 - Install mattress retainers
Instructions for each of these steps are included in this manual.
Tools required: cable tie snippers, Allen keys, ratchet set (for optional side rails only),
Phillips head screwdriver, small hammer, cable ties
Inspection before unpacking
Your bed will arrive in 3-4 separate boxes, depending on the optional items included:
•Platform, including electrical controller and hardware pack
•Headboard and footboard
•Optional side rails, assist bar, backup battery, staff controller, or length extender

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual Inspection before unpacking
www.pe rmobil.ca 5
Damage during transport
Check your shipment to ensure that the Tröst HD Bed or accessories have not suffered
transport damage. It is the responsibility of the receiver to check the shipment. If damaged,
there is a risk that the bed and its accessories can no longer be used safely and securely.
Contact your dealer or Permobil for further information.
If there is any damage, it must be indicated on the bill of lading. Permobil must be informed
of the situation within 24 hours of receipt of goods so that the carrier can be notified as soon
as possible. If Permobil is not informed within 24 hours or the damages are not indicated on
the bill of lading, the customer may have to pay all the costs incurred to replace or repair the
damaged product.
Incorrect shipment
If a Permobil product does not match the original order invoice, the problem must be
communicated to Permobil within 48 hours of the time of delivery. Then, actions necessary
to correct the situation will be at Permobil’s expense and will be made as soon as possible,
following the notification of the incorrect shipment.

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
6www.pe rmobil.ca
1 – Unpack the bed
Two people are required to safely remove the bed from the skid and put the bed together.
The platform is shipped in 2 pieces in the same box:
•Head platform with electrical controller system
•Foot platform with hardware pack
All pieces are secured to a bracket on the packing skid.
Tool required: 6 mm Allen key
STEPS
1 - Identify the box that contains the bed.
2 - Remove the outer box by slowly lifting it up. Protective inserts could fall out if the box
is not removed carefully.
3 - Remove corner protectors and outer wrap. Leave tie-wraps in place.
Note that the bed is attached to a bracket on the packing skid.

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual 1 – Unpack the bed
www.pe rmobil.ca 7
4 - Remove the u-bracket pack and set aside for later use.
5 - From the side of the packing skid, use the Allen key to remove the screws on each side
of the platform to unfasten it from the packing brackets. There are 2 screws on each
side of the platform, 4 total.
6 - Pull and twist the 2 black knobs securing one side of the platform to the packing
bracket. Only unpin the knobs on one side.
UNSCREW
AND REMOVE
PACKING BRACKETS
UNPIN 2
BLACK KNOBS
U-BRACKET
PACK

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
8www.pe rmobil.ca
7 - One person must hold the platform that is still secured to the skid upright while a
second person lifts the unsecured platform assembly off the packing support and places
it wheels down on the floor.
8 - Pull and twist the 2 black knobs securing the remaining side of the platform to the
packing bracket.
LIFT THE PLATFORM
ASSEMBLY UP OFF THE
PACKING BRACKET
HOLD THE OTHER ASSEMBLY
UPRIGHT ON THE SKID

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual 1 – Unpack the bed
www.pe rmobil.ca 9
9 - Lift the second platform assembly up off the skid and place it wheels down on the
floor.
Packing Materials
After removing the bed assemblies, you will have a skid with 2 supports
attached, and 4 loose screws that are not needed to assemble the bed. It is
recommended to store these packing materials so that you can securely store
and transport the bed if necessary.

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
10 www.pe rmobil.ca
2 – Assemble the platform
The Tröst HD Bed platform is provided in 2 pieces. You will arrange the head and foot
platforms on the floor and then attach them in the middle.
Two people are needed for platform assembly.
STEPS
1 - Arrange the head and foot platforms on the floor as shown below.
HEAD
PLATFORM
FOOT
PLATFORM

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual 2 – Assemble the platform
www.pe rmobil.ca 11
2 - Lock the foot end wheels by stepping down on the red pedal.
3 - Note the location of yellow and green connectors under the platform.
NOTE THE LOCATION OF YELLOW
AND GREEN ELECTRICAL CONNECTORS
UNDER THE PLATFROM
PRESS THE RED
PEDAL DOWN
TO LOCK

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
12 www.pe rmobil.ca
4 - Connect the wire with a green tag from under the head platform to the corresponding
wire with a green tag under the foot platform. Note that these connectors do not
“snap.”
5 - Connect the wire with a yellow tag from under the head platform to the
corresponding wire with a yellow tag under the foot platform. Note that these
connectors do not “snap.”
CONNECT GREEN
TAG WIRES
CONNECT
YELLOW TAG
WIRES

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual 2 – Assemble the platform
www.pe rmobil.ca 13
6 - Pull the black knobs on the foot platform out and twist them so they stay in the out
position.
7 - With the black knobs in the out position, two people need to lift the middle of the
platforms so that you can place the locking inserts on each side of the foot platform
into the corresponding slots on the head platform.
PULL AND TWIST
TO LOCK IN
“OUT”POSITION
“IN”
POSITION
LIFT PLATFORM TO ALIGN
LOCKING INSERTS

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
14 www.pe rmobil.ca
8 - Ensure that each locking insert is in position in the slot as shown below.
ALIGN INSERTS ON
FOOT PLATFORM INTO SLOTS
ON HEAD PLATFORM
LOCKING
INSERT
SLOT
ENSURE THAT THE LOCKING INSERT
IS ALIGNED IN THE SLOT AS SHOWN
CORRECT
√
INCORRECT
×

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual 2 – Assemble the platform
www.pe rmobil.ca 15
9 - Rotate the black locking knob to the “IN” position to secure the locking insert in place.
Repeat on the other side of the bed. Ensure that the locking inserts are secured in place
on each side.
10 - Ensure that the platforms are secured together and the bed is flat.
ENSURE THAT THE
BLACK KNOB IS IN
THE “IN”POSITION
“OUT”POSITION

Tröst HD Adjustable Long-Term Care Bed Owner’s Manual
16 www.pe rmobil.ca
2.1 Remove cable ties
Note that some cable ties should stay in place to secure the wires.
The cable ties listed below should be removed.
Tool required: cable tie snipper
STEPS
1 - Cut 2 cable ties on the head deck so that you can lift the head deck.
2 - Lift the head deck so you can access the power cord and hand pendant. One person
must hold the head deck in position.
3 - Cut the cable tie on the power cord.
4 - Cut the cable tie(s) on the hand pendant.
LIFT HEAD
DECK