Pet Gear Bi-Fold supertraX PG9166GRSX User manual

INSTRUCTION MANUAL
Bi-Fold supertraXTM Pet Ramp
PG9166GRSX
For The ON-THE-GO Pet™

SUPERTRAX BI-FOLD PET RAMP • PG9166GRSX
2
PARTS LIST
INSTRUCTIONS FOR USE
Step 1. Unfold ramp and place on rm surface with
supertraX surface facing up (Figure A).
Security Strap
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
A.
Ramp
supertraX
Surface

SUPERTRAX BI-FOLD PET RAMP • PG9166GRSX 3
Step 2. Be sure the ramp is secure and all four corners
are supported.
Step 3. If used on the rear entrance of a van or SUV,
attach the security strap to the door latch,
as shown (Figure C).
INSTRUCTIONS FOR USE
C.
Watch for pinch points while unfolding ramp (Figure B).
B.

WARNING!
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw
aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive,
destructive, immature or untrained animals. Do not use near an open or exposed ame. Failure to follow these
warnings and the instructions could result in serious injury or death.
• Before use, be sure ramp is installed according to instructions.
• Use as a pet ramp ONLY!
• Do not use to load people or other objects.
• Never leave the ramp unattended.
• The ramp is designed to support a maximum load of 150 lbs. when installed properly.
• Exceeding the load limit will void the product warranty and may cause injury to the pet or pet owner.
• Never use the ramp while the vehicle is in motion.
View other dog steps and ramps made by Pet Gear on our website.