Pet Gear ON-THE-GO Pet PG8400BG User manual

To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet™
INSTRUCTION MANUAL
JOGGER PET STROLLER
PG8400BG/PG8400SG
AT
Interior Dimensions:
30L x 13W x 22H

JOGGER PET STROLLER • PG8400BG/PG8400SG
2
PARTS LIST
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
Axle
Front Wheel 2-Back Wheels
Air Pump
Stroller
INSTRUCTIONS FOR USE
Spread the canopy apart to the open position.
Apply brake lever by pushing down with toe.
Ensure brakes are applied when parking stroller.
Release by lifting brake lever with toe.
WARNING: Never leave your stroller parked
without applying brakes.
Back View of Stroller
A.
Ensure the canopy is closed before
folding the stroller.
Step Here
Canopy

JOGGER PET STROLLER • PG8400BG/PG8400SG 3
UNFOLDING THE STROLLER
Step 1. Release folding latch (B).
Step 2. Spread handle (C) and seat apart until the
frame clicks and locks on both sides.
Step 3. Ensure that the stroller is locked in on
both sides before using.
C.
B.
FOLDING THE STROLLER
Step 1. Before folding the stroller, unzip
stroller, and open the canopy.
Step 2. Slide second frame lock release
(E) to the right, while squeezing the main
frame lock release (D) rotate the folding
mechanism almost 180 degrees forward
until stroller releases and handle is
lowered.
Step 3. When closed, push folding latch
(B) onto catch.
See above to view latch (B).
E.
D.
Folding
Mechanism

JOGGER PET STROLLER • PG8400BG/PG8400SG
4
PUMP INSTRUCTIONS
BACK WHEEL ASSEMBLY INSTRUCTIONS
Step 1. Push back wheels until they easily click into place.
Step 1. Pull stem out from inside of the pump. Step 4. Remove cap on valve, then place stem onto
valve and pump tire with handle.
After tire is lled, place cap back onto valve.
Stem
Step 2. Place inside opposite end.
Step 3. Twist on until tight.
Handle Pump
Cap/Valve

JOGGER PET STROLLER • PG8400BG/PG8400SG 5
Shown with both back wheels in place. To connect or release wheel from axle, squeeze pin in.
BACK WHEEL ASSEMBLY INSTRUCTIONS
Pin
FRONT WHEEL ASSEMBLY INSTRUCTIONS
Step 1. To attach front wheel, slide plastic wheel
support up and into tubing.
Step 2. Slide wheel up, until velco pins pop out
of holes.
Tubing Tubing
Velco Pin Velco Pin

JOGGER PET STROLLER • PG8400BG/PG8400SG
6
FRONT WHEEL ASSEMBLY INSTRUCTIONS
Step 3. To use stroller in locked position for jogging,
push pin in.
Step 4. To use stroller in swivel position, pull pin
down, and to the right.
Swivel
Position
Locked
Position

JOGGER PET STROLLER • PG8400BG/PG8400SG
LOOKING AFTER YOUR STROLLER
WHEEL MAINTENANCE
• Always store product in a clean, dry place.
• Not recommended for use on the beach.
• Do not put heavy items on top of the stroller.
• Clean frame by wiping with a lightly oiled cloth.
• Do not use detergent or abrasives. Spot clean fabric with dry cleaning uid or mild soap and
warm water.
• To ensure easy maneuverability and to minimize wear and tear, (especially wheels, axles, and
swivels), keep all moving parts clean and lubricated with WD40® or light machine oil.
• NOTE: Do not lubricate brake components or swivel locks.
• Regularly check stroller for loose parts. These should be tightened or replaced.
• To clean and lubricate front and rear wheels, push out locking lever under wheel housing to
release rear wheel.
• To ensure ease of maneuverability and to minimize wear and tear, keep all moving parts clean and
lubricated with WD40® or light machine oil.
• Push wheel sets back on until they click and lock in position; pull on wheel housings to ensure
they are secure.
• Push stroller back and forth and rotate swivels around to work in lubricant.
• Clean the rear wheel assembly and the rest of the frame with warm, soapy water; clean off with
warm water and dry thoroughly.
• NOTE: Do not lubricate brake components or swivel locks.
7

JOGGER PET STROLLER • PG8400BG/PG8400SG
8
WARNING!
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw
aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive,
destructive, immature or untrained animals. Do not use near an open or exposed ame. Failure to follow these
warnings and the instructions could result in serious injury or death.
• Do not carry additional bags, goods, or accessories in or on stroller except as recommended
in the manufacturer’s instructions.
• Recommended use of an approved safety restraint correctly tted and adjusted.
• Do not leave pet unsupervised in stroller.
• Before making adjustments to stroller ensure that pet’s body is clear of any moving parts.
• This stroller is designed for one pet only.
• Do not hang bags from handles as this may cause the product to become unstable.
• Do not use on escalator or stairs; fold stroller and carry.
• Put on brake whenever you park the stroller.
• Ensure stroller is completely erected and check that all locks are engaged before placing pet
in stroller.
• Do not overload as stroller may become unstable; maximum weight of pet using this stroller
not to exceed 70 lbs.
• Any goods carried in the basket not to exceed 6 lbs.
REPLACEMENT PARTS
Use only PET GEAR replacement parts.
Please have your model number ready before calling.
You can also request parts: http://www.petgearinc.com/main.asp?sel=2
PO Box 99∙West Rutland, VT∙05777∙877-752-9123∙www.petgearinc.com