Pet Gear DELUXE SOFT STEP II User manual

To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet™
INSTRUCTION MANUAL
DELUXE SOFT STEP II
PG9710SOC

DELUXE SOFT STEP II • PG9710SOC
2
PARTS LIST
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
Dowel
Risers
Left Panel Right Panel
AB
C
D
Top Stair
E
with Straight Edge
Bottom Stair
F
with Curved Side Deluxe Soft Step Cover
G

DELUXE SOFT STEP II • PG9710SOC 3
ASSEMBLY INSTRUCTIONS
Step 1
Place right panel, part (B) on oor with PET GEAR Logo
facing the oor and insert top stair, part (E).
Keep the STRAIGHT EDGE toward the back and rug
facing the top. Make sure there are no gaps between
parts after inserting.
(If inserting part is difcult put a little dish soap on
doweled end before inserting.)
Step 2
Insert riser, part (C). Make sure there are no gaps
between parts after inserting.
Step 3
Insert bottom stair, part (F). Note the CURVED SIDE
direction. Make sure there are no gaps between parts
after inserting.
Step 4
Insert riser, part (C). Make sure there are no gaps
between parts after inserting.
E
B
C
F
C
Straight Edge
Curved
Side

DELUXE SOFT STEP II • PG9710SOC
4
ASSEMBLY INSTRUCTIONS
Step 5
Insert dowel, part (D). Make sure there are no gaps between
parts after inserting.
D
Step 6
Attach left panel, part (A). Align all holes before pushing
panel down. Make sure there are no gaps between parts
after inserting.

5
DELUXE SOFT STEP II • PG9710SOC
ASSEMBLY INSTRUCTIONS
Step 7
Place deluxe soft step cover, part (G), over steps with the zipper in the back of the steps.
Step 8
Pull the zipper down to close.
G