Pet Gear PG8140NZGAU User manual

To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet™
INSTRUCTION MANUAL
PG8140NZ
Interior Dimensions:
20"L x 12"W x 18.5"H

PARTS LIST
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
UNFOLDING THE STROLLER
Stroller Cup Holder
2-Front Wheels 2-Rear Wheels
Step 1. Spread handle (A) and seat apart until the frame
clicks and locks on both sides.
Step 2. Stroller should look like this when unfolded.
A.
2
VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ

TO ASSEMBLE FRONT WHEELS
Step 1. Push rear wheel onto frame until it clicks
and locks into place on both sides.
TO ASSEMBLE REAR WHEELS TO FRAME
Step 2. Release locking lever by pushing lever down
so wheel can swivel 360° while strolling.
Step 1. Push front wheels onto stroller tubing until
steel pin locks (pops out).
Push wheels onto stroller frame
3
VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ

INSTRUCTIONS FOR BRAKE USE
Apply brake lever by pushing down with toe.
Ensure brakes are applied when parking stroller.
Release by lifting brake lever with toe.
WARNING: Never leave your stroller parked
without applying brakes.
Back View of Stroller
Brake is applied when lever is down. Brake is not applied when lever is up.
4
VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ

Step 1. To engage the front wheel locking mechanism so that
the front wheel does not swivel (best when the stroller is used
for fast walking or running) pull tab up.
Step 2. To disengage the locking mechanism so that the front
wheel swivels (for easy steering) push tab down.
TO USE FRONT WHEEL LOCKING MECHANISM
Unlock
Lock
Step 1. Snap the cup holder over plastic bolt and push downwards to lock.
TO ASSEMBLE CUP HOLDER
5
VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ

USING CARRIER WITH STROLLER
Place carrier onto stroller frame and lock latch downwards
on both sides to secure.
Push latch down to lock.
6
VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ

PARTS LIST
PRODUCT SET UP
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
View 360 Carrier
Unfold metal wires on the bottom of the View 360 Carrier.
Fully Opened
1 Side support bar with
seat belt holder.
1 Side support bar.
2 Bottom support bars.
A
A
B
B
C
C
C
7
VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ

Secure Velcro Here
Secure Velcro Here
Secure Velcro Here
Secure Velcro Here
Secure Velcro Here
Secure bottom velcro points first to the bottom wires.
Push button to open carrier.
Next, secure velcro on
each side of carrier.
Push top portion of
latch down into
the lower portion of
latch to close carrier.
Push button to open.
8
VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ

ASSEMBLY INSTRUCTIONS FOR BOOSTER BASE
B
C
Push down until steel pin
locks on bottom support bar.
Insert side support bar
into each of the bottom support bars
C
B
C
C
A
C
Push down until steel pin
locks on bottom support bar.
Insert side support
bar with seat belt holder
into each of the bottom support bars
A
C
9
VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ

Seat belt
SECURING BOOSTER SEAT FRAME
Seat belt
Place seat belt in this location.
Place latch in
down position.
Place latch in
down position.
After seat belt is in position
lock latch to secure seat belt.
10
VIEW 360 STROLLER, BOOSTER AND CARRIER TRAVEL SYSTEM · PG8140NZ