Pet Gear PG1117JG User manual

INSTRUCTION
BUCKET SEAT/BOOSTER
PG1117CS / PG1117JG / PG1122CS / PG1122JG
For The ON-THE-GO Pet™

2
PARTS LIST
SET UP
BUCKET SEAT/BOOSTER • PG1117CS / PG1117JG / PG1122CS / PG1122JG
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
Never leave your pet unattended in your car.
Always use a pet harness.
Easily installs with either lap or shoulder belt.
Place seat belt underneath booster and insert
latch plate into buckle until you hear a click.
Pull on booster seat to make sure it is secure.
Resecure if necessary.
Booster

WARNING!
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw
aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive,
destructive, immature or untrained animals. Do not use near an open or exposed ame. Failure to follow these
warnings and the instructions could result in serious injury or death.
Discover other pet travel accessories on our website.