Petsafe PUL-275 User manual

BATTERY 6V
RFA-67
Deluxe Ultralight™
Receiver Collar
PUL-275
Please read this entire Product Manual before beginning
Product Manual

2 [phone]
Important Safety Information
Explanation of Attention Words and Symbols used in this guide
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION, used without the safety alert symbol, indicates
a hazardous situation which, if not avoided, could result in
harm to your pet.
• Not for use with aggressive dogs. Do not use this product
if your dog is prone to aggressive behavior. Aggressive
dogs can cause severe injury or death to their owners and
others. If you are not sure that this product is right for your
dog, please talk to your veterinarian or a certified trainer.

petsafe.com 3
This PetSafe®In-Ground Fence™is not a solid barrier. This
system is designed to act as a deterrent to remind pets by
Static Correction to remain in the boundary established. It
is important that you reinforce training with your pet on a
regular basis. Proper fit of the collar is important. A collar
worn for too long or made too tight on the pet’s neck may
cause skin damage ranging from redness to pressure ulcers.
This condition is commonly known as bed sores.
• Avoid leaving the collar on the dog for more than 12 hours
per day.
• When possible reposition the collar on the pet’s neck
every 1 to 2 hours.
• Check the fit to prevent excessive pressure; follow the
instructions in this manual.
• Never connect a lead to the electronic collar; it will cause
excessive pressure on the contacts.
• When using a separate collar for a lead, don’t put
pressure on the electronic collar.
• Wash the dog’s neck area and the contacts of the collar
weekly with a damp cloth.
• Examine the contact area daily for signs of a rash or
a sore.

4 [phone]
• If a rash or sore is found, discontinue use of the collar
until the skin has healed.
• If the condition persists beyond 48 hours, see your
veterinarian.
• For additional information on bed sores and pressure
necrosis, please visit our website.
These steps will help keep your pet secure and comfortable.
Millions of pets are comfortable while they wear stainless
steel contacts. Some pets are sensitive to contact pressure.
You may find after some time that your pet is very tolerant
of the collar. If so, you may relax some of these precautions.
It is important to continue daily checks of the contact area.
If redness or sores are found, discontinue use until the skin
has fully healed.
You may need to trim the hair in the area of the Contact
Points. Never shave the dog’s neck; this may lead to a rash
or infection.
• The Receiver Collar should not be on your dog when the
system is tested. Your pet may receive an unintended
correction.

petsafe.com 5
• The Boundary Width of the system must be tested
whenever an adjustment is made to the containment field
to prevent unintended corrections to your pet.
• If you use a collar and leash for training, be sure the extra
collar does not put pressure on the contact points.
• Always remove your dog’s Receiver Collar before
performing any Transmitter testing.
• If possible, DO NOT use an AC circuit protected with a
Ground Fault Circuit Interrupter (GFCI) or Residual Current
Device (RCD). In rare cases, nearby lightning strikes may
cause the GFCI or RCD to trip. Without power your dog
may be vulnerable to escape. You will have to reset the
GFCI or RCD to restore power to the system.

6 [phone]
Thank you for choosing PetSafe®brand. You and your
pet deserve a companionship that includes memorable
moments and a shared understanding together. Our
products and training tools promote a lifestyle of protection,
teaching, and love — essentials that influence memories for
a lifetime. If you have any questions about our products or
training your pet, please visit our website at petsafe.com or
contact our Customer Care Center at 1-800-732-2677.
To get the most protection out of your warranty, please
register your product within 30 days at petsafe.com. By
registering and keeping your receipt, you will enjoy the
product’s full warranty and should you ever need to call
the Customer Care Center, we will be able to help you
faster. Most importantly, PetSafe®will never give or sell
your valuable information to anyone. Complete warranty
information is available online at petsafe.com.
Fence installation and training help: petsafe.com.

petsafe.com 7
How the System Works
A radio signal travels from the Fence Transmitter through a buried wire,
marking the boundaries you wish to set for your dog. Your dog wears
a Receiver Collar that detects the signal at the boundary. As your dog
approaches the boundary, the receiver issues a warning tone. If he
proceeds further, he receives a safe but startling Static Correction. While
harmless, the correction will persuade him to stay in the containment
area you’ve established. Boundary flags are a temporary visual aid for
your pet; remove them after training. This PetSafe®In-Ground Fence™
has been proven safe, comfortable, and effective for pets over 8 pounds.

8 [phone]
Operating Guide
Prepare the Receiver Collar
Your Receiver Collar comes with short Contact
Points. Long Contact Points for pets with long or
thick hair are available through our Customer Care
Center. Tighten the Contact Points using Test Light
Tool (A) one-half turn beyond finger tight. Check
the tightness weekly.
To Insert and Remove the Battery
Note: Do not install the battery while the Receiver
Collar is on your pet.
This Receiver Collar utilizes a replaceable PetSafe®
battery (RFA-67). This unique battery is designed
to make battery replacement easier and increase
water protection.
To insert the battery, align the symbols on the
battery (arrow) and Receiver Collar (triangle) (B).
A
B
C

petsafe.com 9
Use the edge of the Test Light Tool to turn the battery clockwise until the
arrow lines up with the lock symbol on the housing.
To remove the battery, turn the battery counter-clockwise using the edge
of the Test Light Tool (C). DO NOT attempt to cut into or pry open the
battery. Be sure to discard the used battery properly. Battery life will vary
depending on how often your pet tests the system and receives a Static
Correction. Check the Receiver Collar every month to ensure the battery
is working properly.
If the Receiver LED Indicator Light is flashing every 4 to 5 seconds, battery
replacement is required. Remove the old battery from the Receiver Collar.
Discharge all power by holding the correction level button down until the
LED is no longer illuminated. Replace with a new battery.
A replacement PetSafe®battery (RFA-67) can be found at many retailers.
Contact the Customer Care Center or visit our web site at petsafe.com to
locate a retailer near you.

10 [phone]
To Set the Static Correction Level
Read all steps before attempting to set the Static Correction Level.
1. Remove the clear plastic cover with the Test Light
Tool to expose the Correction Level Button (D).
2. With the battery installed, press the Correction
Level Button and release when the Receiver
Indicator Light lights up (E).
3. The Receiver Indicator Light will emit a series of
flashes representing the Static Correction Level.
4. Increase the Static Correction Level by pressing
and releasing the Correction Level Button within
5 seconds of the previous series of flashes.
5. After setting the Static Correction Level, replace
the cover to protect the Correction Level Button.
The Static Correction levels increase in strength
from 1 to 5. Pushing the Correction Level Button
while the Receiver Collar is on level 5 will cause the
Receiver Collar to revert to Level 1. Refer to the
Function and Response Table to choose the Static
Correction level that best fits your pet.
D
E