
Copyright © 2020, Fast ČR, a. s. Revision 05/2022
8
EN
PART 3: BEFORE FIRST USE
Take the appliance and its accessories out of the packaging materials. Store packaging material for
possible future use. Wash removable accessories that come into contact with food using water and
kitchen detergent. Then thoroughly rinse them under fl owing water and dry thoroughly with a wiping
cloth. More information found in chapter“Cleaning and maintenance”.
ATTENTION:
Be careful when handling the cutting disc to prevent injury caused by the blade.
PART 4: ASSEMBLING THE ELECTRIC FOOD SLICER
• Alwaysplacethefoodsliceronaneven,dryandstablesurface.
• Seattheslidingplateontotheguidingplatewithgrooveandpushgentlyuntilthelugsonthe
sliding plate fit into the grooves of the guide plate. The sliding plate is correctly seated when it can
freely move back and forward.
• Attachthefoodpusherontotheslidingplatewithangerguard.
• Connectthepowercordplugtoapowersocket.
Be careful when handling the cutting disc to prevent injury caused by the blade.
PART 5: USING THE ELECTRIC FOOD SLICER
• Setthecuttingthicknessadjustmentdialtotherequiredposition.
• Placefood onthe slidingplatesothat itis locatedbetween thefoodpusher andthe cutting
thickness setting plate.
• Usingthespeedadjustmentslider,settherequiredcuttingspeed.Whencuttingsofterfood,usea
lower speed, when cutting harder food, you can use a higher speed.
• Usingthepowerswitch,startthefoodslicer.PositionIservestostarttheconstantmode,position
II serves to start the pulse mode.
• Movetheslidingplatebackandforwardandusingthefoodpusher,movethefoodtowardsthe
cutting thickness setting plate. The cut slices will fall on to a food plate.
• Ifthefoodslicerisrunningintheconstantmode,turnitobyswitchingthepowerswitchto
position 0. If the food slicer is running in the pulse mode, turn it off by releasing the pressed power
switch in position II.
• Beforetakingawayslicesorremainsofslicedfood,ensurethatthecuttingdischascometoa
complete stop.
• Afternishingusingtheappliance,disconnectitfromthepowersocket.