Philips EasyAir SNS410 MC User manual

Design-in Guide
Single, compact, cost-effective
luminaire control
Philips EasyAir SNS210 MC, SNS410 MC
August 2021
Sensors
EasyAir
SNS210 MC, SNS410 MC

2
Design-in Guide - EasyAir SNS210 MC
August 2021
Contents
3
3
4
5
6
6
6
7
8
9
9
11
11
11
11
11
12
12
12
13
13
14
15
17
18
19
21
21
Introduction to this guide
More information or support
Warnings and instructions
Introduction of EasyAir SNS210 MC
Product characteristics
EasyAir SNS210 MC overview
Zigbee and Bluetooth Low Energy
Motion detector
Sensor view shield
Light sensor
LED indicator
Daylight regulation and calibration
Daylight regulation without calibration
Daylight regulation with calibration
Mechanical design-in
Wire strip length
Wire insertion
Wire separation from the connector
Wiring Information
Wire distance for remote mounting
Luminaire-to-luminaire distance
Recommendations to design-in around
EasyAir SNSx10 MC with good RF signal
Mounting to a luminaire
Mounting EasyAir SNS410 MC inside of a
luminaire
Mounting in a bracket (SMB-50)
Installing EasyAir SNS210 MC with ceiling
mount bracket (SNS210 MCCMP)
Labels
EasyAir SNS210 MC with multiple Philips
Xitanium SR LED drivers (1:N application)
Luminaire Production Test
FAQ
Contact details
Philips EasyAir SNS210 MC
Disclaimer 22
16
10
10
10

3
Design-in Guide - EasyAir SNS210 MC
August 2021
Introduction to this guide
Thank you for choosing Philips EasyAir SNS210 MC, SNS410
MC. In this guide luminaire manufacturers will find the
information required to design this product into a luminaire
and configure it to suit specific applications. This design-in
guide covers sensor functionality, mechanical mounting,
wiring details, configuration and commissioning (grouping)
method, application notes and frequently asked questions.
For sensor specifications, please see the datasheet
available at www.lighting.philips.co.uk/oem-emea/
products/connected-lighting.
More information or support
For further information or support, please consult your
local Philips sales representative or visit
www.lighting.philips.co.uk/oem-emea/support/technical-
downloads.
Philips EasyAir SNS210 MC Philips EasyAir SNS410 MC

4
Design-in Guide - EasyAir SNS210 MC
August 2021
Warnings and instructions
•EasyAir SNS210 MC, SNS410 MC must be used with Philips
Xitanium SR LED drivers.
• Do not apply mains power directly to the sensor.
•Do not cover the sensor during operation or mount the
sensor internal to the luminaire.
•External infrared light source in the space might have
influence on occupancy detection.
•Incorrect location of sensor (e.g., with setting up of
multiple SNS210 devices into a single network or a group
with addition of qualified wireless switches obstructions
in viewing angle) will result in incorrect functioning of
occupancy detection.
•Faulty settings of the sensor might result in undefined
startup.
•Make sure the sensor, especially the occupancy detection
lens, is protected from damage during shipment and
handling.
•The application area of EasyAir SNS210 MC is designed
for a typical indoor environment (open/private offices,
conference rooms, classrooms, corridors, etc.) in normally
heated and ventilated areas. EasyAir SNS210,SNS410has
no protection against aggressive chemicals or water.
•Make sure the the EasyAir SNS210 MC, SNS410 MC
Zigbee/Bluetooth antenna is not covered by metal for
proper RF communication.

5
Design-in Guide - EasyAir SNS210 MC
August 2021
Introduction of EasyAir SNS210 MC
The Philips EasyAir SNS210 MC is the ideal solution for
per-luminaire control of smart luminaires. It combines
occupancy sensing, daylight harvesting and task tuning in a
single, compact package for easy OEM luminaire assembly.
EasyAir SNS210 MC operates with the established D4i open
standard digital interface to make a simple two-wire
connection between sensor and driver, thus eliminating
the need for multiple components and auxiliary devices.
The result is a cost-effective and easy-to-design-in
solution ideal for energy-savings. An intuitive
MasterConnect app makes commissioning and
configuration during and after installation fast and easy.
EasyAir SNS210 MC enables grouping allows scene setting
on a wireless switch (e.g., presentation mode for a
conference room) as well as occupancy sharing (i.e.,
luminaires within a group can be programmed to remain at
prescribed light levels so long as occupancy is detected
anywhere in the group).
EasyAir SNS410 MC has the same form factor as EasyAir
SNS210 MC and uses the same radio tranceiver but is
without the occupancy and daylight sensors.
For more details on specification and ordering codes,
please refer to the SNS210 MC, SNS410 MC datasheetson
the technical downloads page.
www.lighting.philips.co.uk/oem-emea/support/technical-
downloads