Philips HR3667 User manual

HR3665, HR3666
HR3667
User manual

2ENGLISH
1
o
k
A
B C D
n
p
a
b
c
d
e
f
g
h
i
j
m
l

3
ENGLISH
2
1 2 3
9
4
6
10 11
7
5
8

4ENGLISH
3

5
ENGLISH
4
12
6
3
45

6ENGLISH
Table of Contents
Important 7
Integrated scale 9
Built-in safety lock 9
Safety Feature 9
Electromagnetic elds (EMF) 9
Recycling 10
Introduction 10
Overview (g. 1) 10
Before rst use 10
The NutriU App 11
Connecting your blender to the App 11
Using the blender (g. 2) 11
Preparation before use 11
Selecting the menus 12
Using the spatula (g. 3) 14
Using the grinder 14
Cleaning (g. 4) 14
Software upgrades 15
Device compatibility 15
Troubleshooting 15
Guarantee and support 16

7
ENGLISH
Important
Read this user manual carefully before you use the appliance and save it for future
reference.
Danger
-Never immerse the motor unit in water or any other liquid, nor
rinse it under the tap.
Warning
-Check if the voltage indicated on the base of the appliance
corresponds to the local mains voltage before you connect the
appliance.
-This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
-This appliance shall not be used by children. Keep the
appliance and its cord out of the reach of children.
-Children shall not play with the appliance.
-Do not touch the sharp blades when the appliance is plugged
in. If the blades get stuck, unplug the appliance before you
remove the ingredients. Be careful when handling the sharp
cutting blades, emptying the bowl and during cleaning. Never
reach into the blender jar with your ngers or an object while
the appliance is running.
-Switch o and unplug the appliance from the power supply
before:
• Removing it from the stand, changing the accessories or
approaching parts that move in use.
• Assembling, disassembling or cleaning it.
• It is left unattended.
-Do not use the appliance if the plug or the mains cord is
damaged or has visible cracks. If the mains cord is damaged,
you must have it replaced by Philips, a service center
authorized by Philips or similarly qualied persons in order to
avoid a hazard.
-Make sure the blade unit is securely fastened and the lid is
properly assembled to the blender jar before you use the
appliance.

8ENGLISH
-Be careful if hot liquid is poured into the blender as it can be
ejected out of the appliance due to a sudden steaming.
-Do not operate the blender for more than 30 seconds without
any ingredient. It may lead to overheating.
-This appliance is intended for household use only.
-Never assemble or disassemble the blender jar, the grinder or
the tumbler to the motor base while the power is on.
-Make sure the air inlets in the bottom are not blocked. This can
lead to an overheating of the device.
Caution
-In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through
an external switching device, such as a timer, or connected to
a circuit that is regularly switched on and o by the utility.
-Never ll the blender jar with ingredients hotter than 80°C.
-Never use any accessories or parts from other manufacturers
or that Philips does not specically recommend. If you use
such accessories or parts, your guarantee becomes invalid.
-Do not exceed the maximum indication on the blender jar.
• To prevent spillage, do not put more than 2 litres (plastic
jar) of liquid in the blender jar, especially when you process
at a high speed. Do not put more than 1,5 litres (plastic
jar) in the blender jar when you process hot liquids or
ingredients that tend to foam.
-Do not exceed the maximum quantities and processing times
indicated in the relevant table.
-If food sticks to the wall of the blender jar, switch o the
appliance and unplug it. Then use a spatula to remove the
food from the wall.
-Do not let the appliance run for more than 3 minutes at a time.
Let the appliance cool down to room temperature before you
continue processing.
-Do not use glass jar right after taking it out from dishwasher of
refrigerator. Let it stay at room temperature for at least 5 min
before use.
-Stop and unplug the appliance if there is a pungent smell or
smoke. Let it cool down for 15 minutes.
-For safety reasons the blender can only be started via the user
interface of the blender and not via the App.

9
ENGLISH
-Keep the display clean and dry, otherwise a malfunction of the
buttons can occur.
-For nutritional information of your Smoothies make sure that
you insert the same ingredients as you choose in the App.
Otherwise the nutritional information is not correct.
-Place the blender on a at surface and make sure that nothing
is under the appliance.
-Do not touch or move the blender or the power cable during
the weighing process.
-Do not wind the power cable around the blender to ensure a
correct weighing process.
-The scale cannot weigh ingredients that weigh less than
1 gram.
-If you add further ingredients in the blender jar during
blending, the scale does not take the weight and nutrient
change into account.
-Noise level: Lc = 90 dB(A)
Integrated scale
The blender has an integrated scale that measures the amount of ingredients you put in
the blender and helps to calculate the nutritional information of your Smoothies.
Built-in safety lock
This feature ensures that you can only switch on the appliance if the blender jar is
assembled on the motor unit properly. If the blender jar is correctly assembled, the
built-in safety lock will be unlocked.
Safety Feature
In case of overloading, the blender automatically activates the protection and operation
will stop and the overloading symbol will light up on the control panel. If this occurs,
unplug the appliance and allow it to cool down for 15 minutes. Remove the ingredients
and clean the blender jar before starting operation.
If the appliance has been blending continuously for more than 3 minutes, it may get too
hot and would turn o automatically. Do not process very thick recipes such as bread
dough or mash potatoes, as this will overheat the blender. If you want to prepare large
quantities, let the appliance cool down to room temperature between the batches.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations regarding
exposure to electromagnetic elds.

10 ENGLISH
Recycling
-This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
-Follow your country’s rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative consequences
for the environment and human health.
Introduction
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register your product at
www.philips.com/welcome.
With the new Philips Avance high speed connected blender you can blend your
favorite recipes. With the integrated scale, you can get nutritional information about
your blend. With the Philips NutriU App, you can personalize your blender’s display, get
recommendations on how to reach your personal health goals and much more.
Overview (g. 1)
aMeasuring cup of the Tritan jar
(HR3666/20) kControl panel
bLid of the Tritan jar (HR3666/20) ADisplay
cTritan blender jar (HR3666/20) BBack button
dBlade unit CRotary knob (On/O, speed level
and conrm)
eCollar DScale button
fMotor unit with display lGrinder jar cover (HR3600 only)
gPower cord mGrinder jar (HR3600 only)
hMeasuring cup the of glass jar
(HR3665, HR3667 only) nSpatula
iLid of the glass jar (HR3665, HR3667
only) oJar of the bottle to go (HR3667)
jGlass blender jar (HR3665, HR3667
only) pLid of the bottle to go (HR3667)
Before rst use
Before you use the appliance and accessories for the rst time, thoroughly clean the
parts that come into contact with food (see chapter “Cleaning”).

11
ENGLISH
The NutriU App
Your Philips Blender is Bluetooth enabled and allows you to connect with the
NutriU app to gain the full blending experience. Within the app you can personalize
your blender by selecting your favorite recipes and ingredients, and the nutritional
information is displayed on the blender screen. After creating your personal prole in
the app, you will get personalized guidance, recipes and detailed nutritional information
to achieve your personal health goals.
Connecting your blender to the App
1 Download the Philips NutriU App on your smart device from the App store or from
www.philips.com/nutriu, follow the registration process and select the NutriBlend
device in the app.
2 Activate Bluetooth on your smart device (minimum Bluetooth version: 4.0).
3 Plug in the appliance and switch on the blender by pressing the rotary knob for a few
seconds.
4 Select a language on the blender.
5 Follow the setup steps on the blender and in the App.
Note
yYou can connect up to 4 smart devices and proles to your blender.
Using the blender (g. 2)
Preparation before use
1 Put the blade unit in the collar.
2 Screw the collar onto the bottom of the blender jar.
3 Attach the blender jar by screwing it on the motor unit.
4 Plug in the device.
5 Turn the rotary knob to select the menu and press it to conrm the menu.
Note
yPrecut ingredients into pieces of approximately 2x2x2cm.
Tip
yFor best blending results, add ingredients in the following order.
1. Liquids (water, juice)
2. Dry goods (grains, powders)
3. Leafy greens
4. Fruits and vegetables
5. Ice and frozen ingredients

12 ENGLISH
Selecting the menus
Manual
Scale Nutri info
Yes No
1 Put all ingredients in the blender jar, close the lid and measuring cup.
2 Weigh your ingredients and press the scale button to tare. Conrm by pressing the
rotary knob.
3 Turn the rotary knob clockwise to the desired speed.
4 When the blend is properly done, turn the rotary knob counterclockwise until the
appliance stops blending.
Tip
yDuring blending, you can use the “pulse” function by keeping the rotary knob
pressed.
Recipes
Scale Nutri info
Yes Yes
In this mode you can follow a pre-dened recipe and see the nutritional information
of your blend.
1 Select a recipe by turning and pressing the rotary knob.
2 Follow the instructions on the blender display.
3 In the last screen before blending, you can see a pre-selected blending time. You
can adjust the time by turning the rotary knob.
Note
yDo not touch the device during the weighing process, as this aects the scale.
yTo calculate the nutritional value of your blend, you need to add each ingredient
separately into the blender jar. When you add an ingredient, you can see the target
amount and actual weight on the blender display.
yAfter one ingredient is put in the jar, wait a few seconds for the scale to get stable
before conrming.
yYou can see the nutritional values of your blend on the blender screen. The
nutritional content will be calculated according to the actual weight of the
ingredients, so it is ne if the actual weight is slightly above or below the target
amount.
yDuring blending, you can use the “pulse” function by keeping the rotary knob
pressed.

13
ENGLISH
Ice crushing
Scale Nutri info
No No
1 Put ice cubes in the blender jar, close the lid and measuring cup.
2 Press the rotary knob to start blending.
3 The blender will run at preset speeds (pulsing up and down) and automatically stop
the blending after 60 seconds. You can manually stop the ice crushing at any time
by pressing the rotary knob.
Note:
yNo nutritional information will be calculated
Create blend
Scale Nutri info
Yes Yes
In this mode you can create your own recipes by selecting the ingredients you want to
blend on the blender display.
1 Select all ingredients you want to blend and go to the weighing screen by pressing
the scale button.
2 Weigh the desired amount of each ingredient and conrm to move to the next
ingredient.
Note
yDo not touch the device during the weighing process, as this aects the scale.
yThe new recipe is saved on the blender and is visible in the App after
synchronization. If desired, you can save it as one of your Favorites in the App.
yAfter one ingredient is put in the jar, wait a few seconds for the scale to get stable
before conrming.
yYou can see the nutritional values of your blend on the blender screen.
yDuring blending, you can use the “pulse” function by keeping the rotary knob
pressed.
Smoothie
Scale Nutri info
No No
1 Put all ingredients in the blender jar, close the lid and measuring cup.
2 Press the rotary knob to start blending.
3 The appliance will run at top speed and automatically stop the blending after 60
seconds.
Note:
yNo nutritional information will be calculated.

14 ENGLISH
Pulse
Scale Nutri info
No No
1 Put all ingredients in the blender jar, close the lid and the measuring cup.
2 Press and hold the rotary knob to start blending.
3 The blender will pulse as long as you keep the rotary knob pressed.
Settings
Scale Nutri info
/ /
You can set your language, the brightness of your display and much more.
Note
yDue to the various nutritional values of dierent types of ingredients and their degree
of ripeness, there could be some deviations on the calculated nutritional value.
Using the spatula (g. 3)
When the blender is switched on, use the spatula to enhance the smoothness and
consistency of result.
When the blender is switched o, use the spatula to remove sticky ingredients on the jar.
Using the grinder
You can use the grinder to grind and chop ingredients such as peppercorns, sesame
seeds, rice, wheat, coconut esh, nuts (shelled), dried soy beans, dried fruits, cheese,
breadcrumbs, etc.
Note
yDo not operate the grinder for more than 30 seconds. It may lead to overheating
yFor dried fruits spread do not exceed the amount of 30g honey, 80g dried fruit (e.g.
dry gs) and 10g seeds for a processing time of 8 seconds.
yDo not add ingredients in the grinder jar over the MAX mark.
yDo not use the grinder to process liquids such as fruit juice.
yNever ll the grinder with hot ingredients.
yYou can order a grinder (HR3600) from your Philips dealer or a Philips service center
as an extra accessory, see items 12 and 13 in g. 1.

15
ENGLISH
Cleaning (g. 4)
Caution
yUnplug the appliance before you clean it.
yThe cutting edges are sharp. Be careful when you clean the blade unit.
yMake sure that the cutting edges of the blade do not come into contact with hard
objects. This may cause the blade to get blunt.
1 For pre-cleaning or easy cleaning, add 1 liter of water and some detergent in the
blender jar.
2 Close the lid and the measuring cup, select “Pulse” or “Manual blend” and let the
appliance blend for a few seconds.
3 Turn o the appliance and unplug it. Disassemble the removable parts of the blender
jar.
4 Clean the removable parts in water with detergent or in the dishwasher.
5 Clean the motor unit with a damp cloth.
Caution
yWhen cleaning the display, do not use abrasive kitchen sponge or detergents. This is
to avoid scratches on the display. Use a damp cloth instead.
Software upgrades
Upgrading is essential to safeguard your privacy and the proper functioning of your
blender and the app.
From time to time, you would receive notications via your NutriU App that upgrades
are available for your blender’s rmware or for the app software.
Note
yWhen an upgrade is being installed, make sure that your smart device is near your
blender to make sure that the Bluetooth connection is stable. An update could take
up to 20 minutes.
yAlways use the latest App and rmware.
yAlways upgrade the App and the blender rmware when you receive a notication
that an upgrade is available. Upgrades are made available when there are software
improvements or to prevent a security issue. If you fail to upgrade, your connection to
the blender via the App may no longer be safe and private.
Device compatibility
For detailed information, refer to the chapter “Technical requirements” on the following
web page: www.philips.com/nutriu.

16 ENGLISH
Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, visit
www.philips.com/support for a list of frequently asked questions or contact the
Consumer Care Center in your country. You can also nd a list of Troubleshoots in your
NutriU App.
Problem Solution
Can I pour boiling hot
liquids into the jar of the
blender?
No, you must not pour very hot ingredients into the
blender jar as it may damage the jar and its accessories.
If you want to pour ingredients like boiled spinach for
pureeing into the jar, let the ingredients cool down to a
temperature of less than 80°C / 175°F to avoid damaging
the appliance.
How to clean the jar of
the blender?
The easiest way to clean the jar is to use the “Quick Clean”
function. Put 500 ml of water (maximum) and some
dishwashing liquid in the jar and press the pulse button
several times. Rinse the jar afterwards.
How to add ingredients
when the blender is
running?
You can add liquids through the small hole in the lid. If you
want to add solid ingredients, switch o the blender rst.
The motor of the blender
stopped and the display
shows this symbol .
Do not let the blender run for more than 3 minutes at a
time. If you have not nished processing after 3 minutes,
switch o the blender and let it cool down to room
temperature before you let it run again.
The blender display
shows this symbol .
Make sure your blender jar is attached correctly on the
motor unit. You can try to detach and attach it again.
Guarantee and support
If you need service or information or if you have a problem, visit the Philips website
at www.philips.com/support or contact the Philips Consumer Care Center in your
country. You can nd its phone number in the worldwide guarantee leaet. If there is no
Consumer Care Center in your country, go to your local Philips dealer.

Specifications are subject to change without notice.
© 2018 Koninklijke Philips N.V.
All rights reserved.