Philips AVENT SCF356/00 User manual

www.philips.com/avent
Philips Consumer Lifestyle BV
Tussendiepen 4, 9206 AD Drachten, Netherlands
Trademarks owned by the Philips Group.
©2017 Koninklijke Philips N.V.All rights reserved SCF356
www.philips.com
User manual
4213 354 36704

2345
6789
10 11 12 13
14 15 16 17
18 19 20 21
22 23 24 25
26 27
1

SCF356
ENGLISH 6
ESPAÑOL 18
FRANÇAIS (CANADA) 31
PORTUGUÊS DO BRASIL 44

ENGLISH
66ENGLISH
General description (Fig. 1)
1 Baby bottle warmer
2 Progress indicator
3 Settings and on/off knob
4 Defrost setting
5 Milk warming setting 1
6 Milk warming setting 2
7 Milk warming setting 3
8 Baby food warming setting
9 On/off button
IMPORTANT
SAFEGUARDS
To fully benet from the support that Philips offers, register your
appliance at www.philips.com/welcome.
Read this user manual carefully before you use the baby bottle warmer
and save it for future reference.
Warning
- Read all instructions.
- Do not use outdoors.
- To protect against re, electric shock and injury to persons do not
immerse the cord, plug or appliance in water or other liquid.
- Do not let cord hang over the edge of table or counter, or touch hot
surfaces. Excess cord can be stored in the base of the baby bottle
warmer.
- This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to t
into a polarized outlet only one way. If the plug does not t fully into
the outlet, reverse the plug. If it still does not t, contact a qualied
electrician. Do not attempt to modify the plug in any way.
- Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.

ENGLISH
7
- A short power-supply cord should be used to reduce the risk
resulting from becoming entangled in or tripping over a longer cord.
Extension cords are available and may be used if care is exercised in
their use. If an extension cord is used, the marked electrical rating of
the cord set or extension cord should be at least as great as the
electrical rating of the appliance, and the cord should be arranged so
that it will not drape over the countertop or tabletop where it can
be pulled on by children or tripped over unintentionally.
- Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions, or has been damaged in any manner.
Return appliance to the nearest authorized service facility for
examination, repair or adjustment.
- The use of accessory attachments not recommended by the
appliance manufacturer may cause injuries.
- Do not place the appliance on or near a hot gas or electric burner, or
in a heated oven.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
- Close supervision is necessary when any appliance is used by or near
children.
- Keep the appliance and its cord out of reach of children.
- Do not preheat the appliance.
- Always place a fully assembled bottle with cap in the baby bottle
warmer before you add water.
- Make sure you add water before you switch on the baby bottle warmer.
- Hot water can cause serious burns. Be careful when the baby bottle
warmer contains hot water.
- Extreme caution must be used when moving an appliance containing
hot oil or other hot liquids.
- Do not touch hot surfaces. Use handles or knobs.The accessible
surfaces may become hot during use.
- Do not move the appliance when it contains hot water.

ENGLISH
8
- Do not place the appliance on an enclosed surface (e.g. a serving
tray), as this could cause water to accumulate under the appliance,
resulting in a hazardous situation.
- Before serving be sure the food is at safe temperature.
- Before serving, unplug the cord from the wall outlet and dish. Do not
leave the cord within child’s reach.
- Always press the on/off button to “off” before you remove the plug
from the wall outlet.
Caution
- This appliance is intended to be used in household and similar
applications such as farm houses, bed and breakfast type
environments, staff kitchen areas in shops, ofces and other working
environments, and by clients in hotels, motels and other residential
type environments.
- Unplug from outlet when not in use and before cleaning.Allow to
cool before putting on or taking off parts, and before cleaning the
appliance.
- Follow the descaling instructions to avoid irreparable damage.
- Do not try to open or repair the appliance yourself. You can contact
the Philips Consumer Care Centre in your country
(see www.philips.com/support).
- Do not use appliance for other than intended use.
SAVE THESE
INSTRUCTIONS.
You can nd the production date code YYWW in the cord storage
compartment in the base of the baby bottle warmer.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic elds.

ENGLISH
9
Using the baby bottle warmer
With this baby bottle warmer, you can safely warm and defrost milk in
Philips Avent feeding bottles and milk or baby food in containers.
The baby bottle warmer helps to preserve the valuable nutrients and
vitamins in breast milk because it never overheats the milk. If milk
becomes too warm, nutrients and vitamins are damaged.To help preserve
the quality of your breast milk, it is important to heat the milk in a safe
and controlled way.The baby bottle warmer is designed to warm gently
and evenly and to avoid hot spots, as the milk circulates during warming.
The built-in sensor tracks and controls the milk temperature, to avoid
overheating at all times.
Note: Philips Avent breast milk bags and Philips Avent 2oz/60ml bottles
cannot be used in this baby bottle warmer.
Explanation of settings
- You can choose between the following settings: (Fig. 2)
- Defrost setting:To defrost a bottle or container with frozen milk or
frozen baby food. No warming occurs.
- Milk warming settings: Select one of these settings when you want to
warm a bottle of milk to a safe temperature. Setting 2 warms your
milk to approximately body temperature. Setting 1 warms your milk
to a slightly lower temperature and setting 3 warms your milk to a
slightly higher temperature.
- Baby food warming setting: Select this setting when you want to
warm a container or jar with baby food.
Using the baby bottle warmer to warm milk
1 Put the mains plug in the electrical outlet (Fig. 3).
2 Place a bottle centrally in the baby bottle warmer (Fig. 4).
Note:To warm milk in a milk storage container, follow the same steps as
indicated for warming milk in a bottle.
3 Fill the baby bottle warmer with the same amount of drinking
water as the amount of milk you want to warm up (for example, to
warm up 125ml/4oz of milk, you need to use 125ml/4oz of drinking

ENGLISH
10
water). If you want to heat up a large amount of milk (>180ml/6oz),
the maximum water level is approximately 1cm/0.4 inches under
the rim of the baby bottle warmer (which corresponds to adding
160ml/4.5oz of drinking water).An accurate water level ensures
correct warming performance. (Fig. 5)
4 Select the desired setting (Fig. 6).
Note: Experience teaches that babies may have a preference for a specic
milk temperature.This can be due to personal preference or external factors
(e.g. environment temperature).All three settings ensure that the milk is
warmed to a safe temperature which is comfortable for your child and helps
to preserve the nutrients and vitamins in the milk.
5 Press the on/off button to turn on the appliance.The light in the
button lights up to indicate that the baby bottle warmer is on (Fig. 7).
Note:The baby bottle warmer starts warming up right after you press the button.
6 Theprogressindicatorstartstollupgraduallywithwhitelightto
show the progress of the milk warming process (Fig. 8).
Note:The progress indicator shows the progress of the milk warming process.
The progress indicator starts ashing when the appliance is on. When the rst
warming phase has been completed, the bottom segment lights up continuously
and the next segment starts ashing to show that the second warming phase is
in progress.These steps continue until the third warming phase has been
completed.Then the entire progress indicator lights up continuously.
Note: During the warming process, the milk circulates to ensure even
warming. It takes about 10 minutes to warm 90ml/3oz of room-temperature
milk. It takes slightly longer to warm cold milk or a large amount of milk.
Caution: Do not take the bottle out of the baby bottle warmer while
theprogressindicatorisashing.
7 When the entire progress indicator lights up continuously, the milk
has reached the set temperature.
,When the milk is warm, you can either take the bottle out of the
baby bottle warmer to feed your baby right away (see section

ENGLISH
11
‘Feeding your baby immediately’) or you can keep it warm in the
baby bottle warmer (see section ‘Keeping milk warm’).
Increasing the milk temperature
1 If you want the milk to be warmer, you can increase the milk
temperature gradually after it is ready by turning to milk warming
setting 3 and leaving the bottle in the appliance at the keep-warm
mode (Fig. 9).
2 If you just turned off the baby bottle warmer or if it just turned off
automatically, turn it back on without removing the warm water
from it, and follow the above step (Fig. 10).
3 The baby bottle warmer turns off automatically after 20 minutes
of keep-warm mode (Fig. 11).
Feeding your baby immediately
1 Press the on/off button to turn off the appliance and take out the
milk bottle (Fig. 10).
2 Always check the temperature of the milk before you feed your baby.
Gently swirl the milk in the bottle and check the temperature of the
milk by sprinkling a few drops on the inside of your wrist (Fig. 12).
3 Unplug the appliance and empty the baby bottle warmer (Fig. 13).
Keeping milk warm
1 When the milk has reached the desired temperature, the baby
bottle warmer automatically turns to the keep-warm mode. In this
mode, the milk is kept at the set temperature for 20 minutes (Fig. 14).
2 The baby bottle warmer turns off automatically after 20 minutes.
The progress indicator turns off to indicate that the milk is not
kept at the desired temperature anymore (Fig. 11).
Note: If you want to feed your baby with milk at the set temperature, you
need to take the milk bottle out of the baby bottle warmer and feed it to
your baby right after the baby bottle warmer turns off, otherwise the milk
cools down.

ENGLISH
12
Note:You cannot prolong the keep-warm mode of the baby bottle warmer
for more than 20 minutes.
Caution: It is not recommended to reheat breast milk twice, as bacteria
start to develop in the milk.
3 Always check the temperature of the milk before you feed your
baby. Gently swirl the milk in the bottle or milk storage container
and check the temperature of the milk by sprinkling a few drops on
the inside of your wrist (Fig. 12).
4 Unplug the appliance and empty the baby bottle warmer (Fig. 13).
Re-using the baby bottle warmer right away for
another bottle
If you want to heat up another bottle right away, let the baby bottle
warmer cool down for a few minutes. To speed up this process, ll the
baby bottle warmer with fresh cold water. When you turn on the baby
bottle warmer, the progress indicator starts ashing from bottom to top
to indicate that the appliance is heating up again.
Note: If the progress indicator is on but does not ash, the baby bottle
warmer is still too warm to heat up another bottle. Please turn off the baby
bottle warmer, let it cool down for a few minutes and make sure you ll it
with fresh cold water.
Using the baby bottle warmer to warm baby food
1 Put the mains plug in the electrical outlet (Fig. 3).
2 Place a baby food container or jar centrally in the baby bottle warmer
(Fig. 15).
Note:You can leave off the lid of the food container or jar, so you can stir the
baby food during heating.
3 Fill the baby bottle warmer with the same amount of drinking
water as the amount of baby food you want to warm up (for
example, to warm up 125ml/4oz of baby food, you need to use
125ml/4oz of drinking water). If you want to warm up a large
amount of baby food, the maximum water level is approximately

ENGLISH
13
1cm/0.4 inches under the rim of the baby bottle warmer (which
corresponds to adding 160ml/4.5oz of drinking water).An accurate
water level ensures correct warming performance. (Fig. 16)
4 Select the baby food warming setting (Fig. 17).
5 Press the on/off button to turn on the appliance.The light in the
progress indicator shows that the baby bottle warmer is on (Fig. 18).
Note:The baby bottle warmer starts warming up right after you press the
button. Due to the large variety of baby food consistencies, it is not possible
for the appliance to detect exactly how long the baby food should be warmed.
6 Theprogressindicatorstartstollgraduallywithwhitelightto
show the progress of the warming process. During the warming
process, do not take the jar or container out of the baby bottle
warmer but stir the baby food while the jar or container is still in
the baby bottle warmer (Fig. 19).
Note:You can start stirring the baby food once the second segment of the
progress indicator lights up continuously. Stirring before this moment is not
effective as the temperature of the baby food is still too low.
Caution: Do not take the food container or jar out of the baby bottle
warmer during warming.
7 When the entire progress indicator lights up continuously, the baby
food has reached the desired temperature.
Note: Due to the large variety of baby food consistencies, it is strongly
recommended that you continuously stir the baby food and check its
temperature while it is heating up for an optimal result.
,When the baby food is warm, you can either take the baby food
container or jar out of the baby bottle warmer to feed your baby
right away (see section ‘Feeding your baby immediately’) or you can
keep it warm in the baby bottle warmer (see section ‘Keeping baby
food warm’).

ENGLISH
14
Increasing the baby food temperature
1 Always taste the baby food after warming it up to make sure it is
not too hot. If you want the baby food to be warmer, put the
container back into the baby bottle warmer and leave it in there at
the keep warm-mode for some time. Keep stirring the baby food
(Fig. 15).
2 If you just turned off the baby bottle warmer or if it just turned off
automatically, turn it back on without removing the warm water
from it, and follow the above step (Fig. 18).
3 The baby bottle warmer turns off automatically after 20 minutes of
keep-warm mode (Fig. 20).
Feeding your baby immediately
1 Press the on/off button to turn off the appliance and take out the
baby food container or jar (Fig. 18).
2 After warming, taste the baby food to ensure it is not too hot (Fig. 21).
3 Unplug the appliance and empty the baby bottle warmer (Fig. 13).
Keeping baby food warm
1 When the baby food has reached the desired temperature,
the baby bottle warmer automatically turns to the keep-warm
mode. In this mode, the baby food is kept at the desired
temperature for 20 minutes (Fig. 22).
2 The baby bottle warmer turns off automatically after 20 minutes.
The progress indicator turns off to indicate that the baby food is
not kept at the desired temperature anymore (Fig. 20).
Note: If you want to feed your baby with the baby food at the set
temperature, you need to take the baby food out of the baby bottle warmer
and feed it to your baby right after the baby bottle warmer turns off. If you
do not do this, the baby food slowly cools down.
Note:You cannot prolong the keep-warm mode of the baby bottle warmer for
more than 20 minutes.

ENGLISH
15
3 Always check the temperature of the baby food before you feed
your baby. Gently stir the baby food in the baby food container or
jar and taste the baby food to ensure it is not too hot (Fig. 21).
4 Unplug the appliance and empty the baby bottle warmer (Fig. 13).
Re-using the baby bottle warmer right away for another
container of baby food
If you want to heat up another container or jar with baby food right away,
let the baby bottle warmer cool down for a few minutes.To speed up this
process, ll the baby bottle warmer with fresh cold water. When you turn
on the baby bottle warmer, the progress indicator starts ashing from
bottom to top to indicate that the appliance is heating up again.
Note: If the progress indicator is on but does not ash, the baby bottle
warmer is still too warm to heat up another container or jar with baby food.
Please turn off the baby bottle warmer, let it cool down for a few minutes and
make sure you ll it with fresh cold water.
Defrost setting
At this setting, you can defrost frozen milk or baby food. Follow the steps
indicated in sections ‘Using the baby bottle warmer to warm milk’
or ‘Using the baby bottle warmer to warm baby food’.
The progress indicator starts ashing when the appliance is on the defrost
setting. The progress indicator gradually lls with white light to show the
progress of the defrosting process.The milk or baby food has defrosted
completely when the entire progress indicator lights up continuously.
The defrost setting defrosts the milk or baby food but does not warm it
up. If you want to warm up milk or baby food after defrosting it, rst turn
off the appliance, then select the desired warming setting and turn the
appliance back on.

ENGLISH
16
Cleaning and descaling
Cleaning
1 After each use, unplug the baby bottle warmer and let it cool down
(Fig. 23).
2 Remove the water from the baby bottle warmer for hygienic reasons
(Fig. 24).
3 Wipe the outside and inside of the baby bottle warmer with a
moist cloth (Fig. 25).
Do not use abrasive, anti-bacterial cleaning agents, chemical solvents or
sharp tools to clean the baby bottle warmer.
Note: If you used the baby bottle warmer to warm containers with baby food,
make sure that no spilled baby food remains on the bottom of the baby
bottle warmer.
Descaling
It is recommended to descale the baby bottle warmer every
four weeks to ensure it continues to work efciently.
1 Mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of cold water
to descale the baby bottle warmer. First select the defrost setting,
then switch on the baby bottle warmer and let the appliance
operate for 10 minutes. Leave the solution in the baby bottle
warmer until all scale has dissolved (Fig. 26).
Note:You can also use citric acid based descalers.
Note: Do not use other types of descalers.
2 Unplug the baby bottle warmer before you empty it (Fig. 23).
3 Empty the baby bottle warmer and rinse its inside thoroughly.
If you still see traces of scale after rinsing, repeat the descaling
procedure (Fig. 24).

ENGLISH
17
Disposal
Your product is designed and manufactured with high quality materials
and components, which can be recycled and reused. For recycling
information, please contact your local waste management facilities or visit
www.recycle.philips.com
Warranty and support
For assistance, visit our website:
www.philips.com/support or call toll free
1-800-54-Avent
Full Two-Year Warranty
Philips North America LLC warrants each new Philips product, Model
SCF356 against defects in materials or workmanship for a period of two
years from the date of purchase and agrees to repair or replace any
defective product without charge.
IMPORTANT:This warranty does not cover damage resulting from
accident, misuse or abuse, lack of reasonable care, the afxing of any
attachment not provided with the product or loss of parts or subjecting
the product to any but the specied battery.
NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply go to www.philips.com/support
or call toll-free 1-800-54-Avent. It is suggested that for your protection you
return shipments of product by insured mail, insurance prepaid. Damage
occurring during shipment is not covered by this warranty.
NOTE: No other warranty, written or oral, is authorized by Philips North
America LLC. This warranty gives you specic legal rights, and you may
also have other rights which vary from state to state. Some states do not
allow the exclusion or limitation of incidental or consequential damages,
so the above exclusion and limitations may not apply to you.
* Read enclosed instructions carefully.
Manufactured for: Philips Personal Health,A division of Philips North
America LLC, P.O. Box 10313, Stamford, CT 06904, USA.
PHILIPS and Philips Shield are registered trademarks of Koninklijke Philips N.V.
© 2017 Philips North America LLC. All Rights Reserved.

ESPAÑOL
1818 ESPAÑOL
Descripción general (g. 1)
1 Calientabiberones
2 Indicador de progreso
3 Botón de ajustes y de encendido/apagado
4 Posición para descongelar
5 Posición 1 para calentar leche
6 Posición 2 para calentar leche
7 Posición 3 para calentar leche
8 Posición para calentar comida infantil
9 Botón de encendido/apagado
PRECAUCIONES
IMPORTANTES
Para sacar el mayor partido a la asistencia que Philips le ofrece, registre el
aparato en www.philips.com/welcome.
Antes de usar el calientabiberones, lea atentamente este manual de
usuario y consérvelo por si necesitara consultarlo en el futuro.
Advertencia
- Lea todas las instrucciones.
- No utilice el aparato al aire libre.
- Para evitar incendios, descargas eléctricas y lesiones personales,
no sumerja el cable, el enchufe ni el aparato en agua u otros líquidos.
- No deje que el cable cuelgue del borde de la mesa o encimera,
ni que toque supercies calientes. El cable sobrante puede guardarse
en la base del calientabiberones.
- Este aparato cuenta con un enchufe polarizado (una hoja es más ancha
que la otra). Para reducir el riesgo de descarga eléctrica, el enchufe está
diseñado para que encaje en una toma polarizada en una única
posición. Si el enchufe no entra completamente en la toma, pruebe al
contrario. Si aun así no entra, póngase en contacto con un electricista
cualicado. No intente modicar el enchufe bajo ningún concepto.

ESPAÑOL
19
- Antes de enchufar el aparato, compruebe si el voltaje indicado en el
mismo se corresponde con el voltaje de red local.
- Es preferible utilizar un cable de alimentación corto a un cable más
largo para reducir el riesgo de tropezar con él o de que se enrede.
Hay cables alargadores disponibles que se pueden utilizar siempre
que se manejen con cuidado. Si se utiliza un cable alargador,
la potencia eléctrica del mismo debe ser al menos tan alta como la
potencia eléctrica del aparato y el cable debe colocarse de tal forma
que no cuelgue de la encimera o de la mesa, ya que los niños podrían
tirar de él o tropezarse sin querer.
- No utilice el aparato si el cable o el enchufe están dañados, si no
funciona correctamente, o si presenta algún fallo o deterioro. Lleve el
aparato al servicio técnico autorizado más cercano para su revisión,
reparación o ajuste.
- El uso de accesorios no recomendados por el fabricante del aparato
puede causar lesiones.
- No coloque el aparato sobre o cerca de una cocina de gas
o eléctrica caliente, o un horno caliente.
- Este aparato no debe ser usado por personas (niños incluidos) con
su capacidad física, psíquica o sensorial reducida, ni por quienes no
tengan los conocimientos y la experiencia necesarios, a menos que
sean supervisados o instruidos acerca del uso del aparato por una
persona responsable de su seguridad.
- Es necesario realizar una estricta supervisión cuando el aparato sea
utilizado por niños o cerca de ellos.
- Mantenga el aparato y el cable fuera del alcance de los niños.
- No precaliente el aparato.
- Coloque siempre el biberón totalmente montado con la tapa en el
calientabiberones antes de añadir agua.
- Asegúrese de añadir el agua antes de encender el calientabiberones.
- El agua caliente puede causar quemaduras graves.Tenga cuidado
cuando el calientabiberones contenga agua caliente.
- Tenga cuidado al mover el aparato si contiene aceite u otros líquidos
calientes.
- No toque las supercies calientes. Utilice las asas o los mangos.
Las supercies accesibles pueden calentarse durante el uso.

ESPAÑOL
20
- No mueva el aparato cuando contenga agua caliente.
- No coloque el aparato sobre una supercie cubierta, ya que el agua
podría acumularse bajo el aparato, provocando una situación de peligro.
- Antes de servir la comida, asegúrese de que está a una temperatura
adecuada.
- Antes de servirla, desenchufe el cable de la toma de pared. No deje
el cable al alcance de los niños.
- Pulse siempre el botón de encendido/apagado a la posición “OFF”
antes de retirar el enchufe de la toma de pared.
Precaución
- Este aparato está diseñado para utilizarlo en entornos domésticos o
similares como: viviendas de granjas, hostales en los que se ofrecen
desayunos, zona de cocina en tiendas, ocinas y otros entornos
laborales, y por clientes de hoteles, moteles y entornos residenciales
de otro tipo.
- Desenchufe el aparato de la toma de alimentación cuando no esté en
uso y antes de limpiarlo. Deje que se enfríe antes de colocar o retirar
las piezas, y antes de limpiar el aparato.
- Siga las instrucciones de eliminación de los depósitos de cal para
evitar daños irreparables.
- No intente abrir ni reparar el aparato por su cuenta. Puede ponerse
en contacto con el Servicio de Atención al Cliente de Philips de su
país (consulte www.philips.com/support).
- No utilice el aparato con otros nes distintos a los previstos.
CONSERVE ESTAS
INSTRUCCIONES.
Puede encontrar el código de la fecha de producción AASS en el
compartimento para guardar el cable de la base del calientabiberones.
Campos electromagnéticos (CEM)
Este aparato de Philips cumple los estándares y las normativas aplicables
sobre exposición a campos electromagnéticos.

ESPAÑOL
21
Uso del calientabiberones
Con este calientabiberones, puede calentar y descongelar la leche de
manera segura en los biberones Philips Avent y la leche y la comida
infantil en recipientes.
El calientabiberones ayuda a conservar los valiosos nutrientes y vitaminas
de la leche materna, ya que nunca calienta la leche en exceso. Si la leche
se calienta demasiado, los nutrientes y vitaminas se dañan. Con el n de
preservar la calidad de la leche materna, es importante calentarla de
forma segura y controlada. El calientabiberones está diseñado para
calentar de manera suave y uniforme y evitar así el riesgo de que existan
áreas demasiado calientes, ya que la leche circula mientras se calienta.
El sensor integrado controla la temperatura de la leche en todo
momento para evitar que se sobrecaliente.
Nota: Las bolsas para leche materna de Philips Avent y los biberones Philips
Avent de 60 ml no se pueden utilizar en este calientabiberones.
Explicación de las posiciones
- Puede elegir entre los siguientes ajustes: (g. 2)
- Posición para descongelar: para descongelar un biberón o recipiente
con leche o comida infantil congeladas. Este ajuste no calienta.
- Posiciones para calentar leche: seleccione una de estas posiciones si
desea calentar un biberón de leche a una temperatura segura. La
posición 2 calienta la leche a la temperatura corporal
aproximadamente. La posición 1 calienta la leche a una temperatura
ligeramente inferior y la posición 3 calienta la leche a una
temperatura ligeramente superior.
- Posición para calentar comida infantil: seleccione esta posición si
desea calentar un tarrito o recipiente de comida para bebé.
Uso del calientabiberones para calentar leche
1 Enchufelaclavijadealimentaciónenlatomadecorriente(g.3).
2 Coloqueunbiberónenlaposicióncentraldelcalientabiberones(g.4).
Nota: Para calentar leche en un recipiente de almacenamiento de leche
materna, siga los mismos pasos indicados para calentar leche en un biberón.

ESPAÑOL
22
3 Llene el calientabiberones con la misma cantidad de agua potable
que la cantidad de leche que desea calentar (por ejemplo, para
calentar 125 ml de leche, tendrá que utilizar 125 ml de agua
potable). Si desea calentar una gran cantidad de leche (> 180 ml),
el nivel máximo de agua es de aproximadamente 1 cm por debajo
del borde del calientabiberones (lo que corresponde a añadir
160 ml de agua potable). Un nivel de agua preciso garantiza un
calentamientoóptimo.(g.5)
4 Seleccionelaposiciónquedesee(g.6).
Nota: La experiencia nos dice que los bebés pueden tener preferencias por
una temperatura de la leche especíca. Esto puede deberse a gustos
personales o a factores externos como, por ejemplo, la temperatura
ambiente. Las tres posiciones garantizan que la leche se caliente a una
temperatura segura y agradable para su bebé y ayuda a conservar todos los
nutrientes y las vitaminas.
5 Pulse el botón de encendido/apagado para encender el aparato.
La luz del botón se ilumina para indicar que el calientabiberones
estáencendido(g.7).
Nota: El calientabiberones comienza a calentar al pulsar el botón.
6 El indicador de progreso empieza a completarse gradualmente con
una luz blanca para mostrar el progreso del proceso de
calentamientodelaleche(g.8).
Nota: El indicador de progreso muestra el progreso del proceso de
calentamiento de la leche y comienza a parpadear cuando se enciende el
aparato. Cuando se ha completado la primera fase de calentamiento, el
segmento inferior se ilumina de forma continua y el segmento siguiente
comienza a parpadear para indicar que la segunda fase de calentamiento
está en curso. Estos pasos se repiten hasta que la tercera fase de
calentamiento se ha completado. Es entonces cuando todo el indicador de
progreso se ilumina de forma continua.
Nota: Durante el proceso de calentamiento, la leche circula para garantizar
un calentamiento homogéneo. Se tarda aproximadamente diez minutos en