Philips DC200/05 User manual

Register your product and get support at
www.philips.com/welcome
Docking Entertainment System DC200
QUICK START
Thanks for buying Philips DC200 Docking Entertainment System.
Our Quick Start guides you through just some of the features on the set.
Please read our instruction booklet to really rise & shine!
DC200_05_QSG.indd 1DC200_05_QSG.indd 1 2008-02-15 1:32:47 PM2008-02-15 1:32:47 PM

ENGLISH
Step A
Connect the supplied mains adapter to the
set's 9V DC jack and the plug into a wall outlet.
Step
B
How to set the Clock & Alarm time
Press and hold SET TIME or 1 ALM/2 ALM
until the hour digits flash.
Press and hold ∞
§to adjust time.
Press SET TIME or 1 ALM/2 ALM to confirm.
Repeat the steps 2-3 to complete all the
other time items setting.
Selecting the Alarm mode
4. Press
∞ §/SOURCE repeatedly to select
your desired alarm mode.
For Nature sound mode, press ALBUM/PRESET
-/+ 1/2to select your desired nature sound track.
Helpful hints:
If you have selected TUNER alarm mode, make
sure you have properly tuned to a station before
turning off the set (See Tuning to radio station).
If you have selected iPod/USB alarm mode,
make sure you have connected the compatible
iPod player or USB device, or the buzzer mode
will be selected automatically.
3 ways to switch off the alarm
Either press briefly: POWER 2or REPEAT
ALARM/BRIGHTNESS CONTROL.
Press 1 ALM or 2 ALM.
Step
C
Tuning to radio station
Press SOURCE once or more to switch on
the radio.
Press ∞
§repeatedly to tune to your
station.
•
1.
2.
3.
•
•
–
–
•
•
1.
2.
To store a preset, press PROG to activate the
programming, and then press ALBUM/PRESET
-/+ 1/2to select a desired preset number, and
then press PROG again to confirm.
To store preset radio stations automatically, press
and hold PROG for more than two seconds.
Step D
Playing Apple iPod using DC200
Remove the top cover of dock.
Snap the correct adaptor (supplied) into the
dock to provide a snug fit for the iPod player.
The indication on the adaptor’s back fits
specific iPod player.
3. Snap the compatible iPod into the dock
connector.
4. Press SOURCE repeatedly to select the iPod
mode.
The connected player will play automatically.
Helpful hints:
By using the buttons ( 2;,
∞
,
§
and
VOLUME ) on the DC200, the following iPod
playback features are available: Play/Pause,
selecting next/previous track, fast forwarding/
rewinding and changing volume.
Refer to the user manual supplied for detailed
descriptions of “Compatible portable player”,
“Selecting the correct dock adaptor” and the
important notes for dock operation.
Step E
Playing a USB mass storage device
Make sure that your DC200 is being powered
by AC mains.
Press SOURCE repeatedly to select the USB
mode.
Plug a compatible USB mass storage device to
DC200’s USB port marked .
Playback will start automatically.
•
•
1.
2.
•
•
–
–
1.
2.
3.
➜
DC 9V
A
B1, B3
3
C2
C1, D4, E2
3
D1, D2, D3
E3
B2, B4, C2
DC200_05_QSG.indd 2DC200_05_QSG.indd 2 2008-02-15 1:32:53 PM2008-02-15 1:32:53 PM