Philips DC910/37B User manual

What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
2
User Manual
Remote Control
Quick Start Guide
User Manual
Quick Start Guide
DC910
Pull out the plastic
protective sheet
before use.
AC power adaptor 3 X iPod dock adaptors
DC910_37_QSG_Eng 8/25/08, 10:471

1
2
3
4
5
6
7
POWERFUL BASSPOWERFUL BASS
Tip
– See the User Manual for how to
connect other equipment to this
system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
Setting the clock
1
Connect the AC power adaptor of the system.
1
In standby mode, press and hold PROG/SET TIME on the remote control.
Press VOLUME +/- (or VOL +/- on the remote control) to switch
between 12 hour and 24 hour display.
Press PROG/SET TIME on the remote control again to confirm.
➜The clock digits flash on the display panel.
Press VOLUME +/- (or VOL +/- on the remote control) to set the hours.
Press PROG/SET TIME on the remote control again.
➜The clock digits for the minutes flash.
Press VOLUME +/- (or VOL +/- on the remote control) to
set the minutes.
Press PROG/SET TIME on the remote control to confirm the time.
DC910_37_QSG_Eng 8/25/08, 10:472

Enjoy
C
1
2
3
Insert the USB device’s USB plug into the socket or fully insert the SD/MMC card into
the SD/MMC slot on the top of the system.
Press SOURCE once or more (or USB/CARD on the remote control) to select
USB/CARD.
Play the available audio files using playback buttons on the set or remote control (such as
2;, S/T).
Playing a USB mass storage device/SD/MMC card
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1) and memory cards
Programming and tuning to radio stations
1
2
3
Press SOURCE repeatedly (or TUNER on the remote control) to select the
tuner source (FM).
Press PROG on the remote control for more than two seconds to program all
available stations in order of waveband.
Press PRESET +/- (or ALBUM/PRESET 3/ 4on the remote control) until
the desired preset station is displayed.
DC910_37_QSG_Eng 8/25/08, 10:473

Enjoy
C
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
CRoyal Philips Electronics N.V. 2008
All rights reserved.
PDCC-ZYL-0835
Playing Apple iPod using DC910
1
2
Select the correct dock adaptor, as indicated on each adaptor, then fit it in
the dock.
Correctly place the compatible iPod player into the dock.
Press SOURCE on the system repeatedly or iPod on the remote control
to select the iPod source.
Power on your iPod player.
Select and play your favourite songs stored in the iPod player.
4
5
Notes for remote control:
–First select the source you wish to control by pressing
one of the source select keys on the remote control (for
example iPod, TUNER).
–Then select the desired function (for example ÉÅ,
à, á).
3
DC910_37_QSG_Eng 8/25/08, 15:174