Philips Essence HR7754 Manual

Essence HR7754
Recipes & Directions for use
Przepisy i instrukcja obsługi
Reţete şi Instrucţiuni de utilizare
Рецепты и Инструкции по эксплуатации
Recepty & Návod k použití
Receptek & Használati utasítások
Recepti in navodila za uporabo
Рецепти та інструкції з використання
приладу
All manuals and user guides at all-guides.com
all-guides.com

2
All manuals and user guides at all-guides.com

3
All manuals and user guides at all-guides.com

4
All manuals and user guides at all-guides.com

ENGLISH 6
PO SKI 27
ROMÂNĂ 48
РУССКИЙ 69
ČESKY 95
MAGYAR 115
S OVENSKY 137
УКРАЇНС КІЙ 159
HR7754
5
All manuals and user guides at all-guides.com

ENGLISH6
Parts and accessories
A) Motor unit
B) Smart process control panel
C) Built-in safety lock
D) Screw cap (must be placed to use bowl
functions)
E) Food processing bowl
F) Tool holder
G) Blender jar
H) Lid of blender jar
I) Peg of lid (activates and deactivates the safety
switch)
J) Lid of food processing bowl
K) Stopper
L) Feed tube
M) Pusher
N) Sieve of citrus press
O) Cone of ccitrus press
P) Juice extractor drum
Q) Juice extractor pulp sieve
R) Lid of juice extractor
S) Pusher of juice extractor
T) Metal blade + protective cover
U) Kneading hook
V) Balloon beater
W) Shredding insert medium
X) Shredding insert fine
Y) Shredding insert coarse
Z) Granulating insert
a) Insert holder
b) Adjustable slicing disc (slicing insert, carrier
and adjusting knob)
Introduction
This appliance is equipped with an automatic
thermal cut-out system.This system will
automatically cut off the power supply to the
appliance in case of overheating.
If your appliance suddenly stops
running:
1Pull the mains plug out of the socket.
2Let the appliance cool down for
60 minutes.
3Put the mains plug in the socket.
4Switch the appliance on again.
Please contact your Philips dealer or an
authorised Philips service centre if the automatic
thermal cut-out system is activated too often.
CAUTION: In order to avoid a hazardous
situation, this appliance must never be connected
to a timer switch.
Important
◗Read these instructions for use carefully and
look at the illustrations before using the
appliance.
◗Keep these instructions for use for future
reference.
All manuals and user guides at all-guides.com
all-guides.com

ENGLISH 7
◗Check if the voltage indicated on the
appliance corresponds to the local mains
voltage before you connect the appliance.
◗Never use any accessories or parts from
other manufacturers or that have not been
specifically advised by Philips.Your guarantee
will become invalid if such accessories or
parts have been used.
◗Do not use the appliance if the mains cord,
the plug or other parts are damaged.
◗If the mains cord is damaged, it must be
replaced by Philips, a service centre
authorised by Philips or similarly qualified
persons in order to avoid a hazard.
◗Thoroughly clean the parts that will come
into contact with food before you use the
appliance for the first time.
◗Do not exceed the quantities and preparation
times indicated in the table.
◗Do not exceed the maximum content
indicated on the bowl, i.e. do not fill beyond
the top graduation.
◗Unplug the appliance immediately after use.
◗Never use your fingers or an object (e.g. a
spatula) to push ingredients down the feed
tube while the appliance is running. Only the
pusher is to be used for this purpose.
◗Always unplug the appliance before reaching
into the blender jar with your fingers or an
object (e.g. a spatula).
◗Keep the appliance out of the reach of
children.
◗Never let the appliance run unattended.
◗Place the lid on the bowl in the right position.
The build-in safety lock will now be deblocked
and you will be able to turn the appliance on.
Both the motor unit and the screw cap have
been provided with marks.The appliance will
only function if the mark on the motor unit is
directly opposite the mark on the screw cap.
◗Switch the appliance off before detaching any
accessory.
◗Always switch the appliance off by pressing
the STOP button.
◗Wait until moving parts have stopped running
before you remove the lid of the appliance.
◗The screw cap can only be removed if the lid
is not on the bowl or if the bowl has been
removed altogether.
◗Never immerse the motor unit in water or
any other fluid, nor rinse it under the tap. Use
only a moist cloth to clean the motor unit.
◗Remove the protective cover from the blade
before use.
◗Let hot ingredients cool down before
processing them (max. temperature
80cC/175cF).
◗If you are processing a liquid that is hot or
tends to foam, do not put more than 1 litre
into the blender jar to avoid spillage.
◗Unplug the appliance immediately after use.
◗For application times, see the table further on
in these instructions for use.
◗Noise level: Lc= 89 dB [A]
Note that it is not possible to use the
bowlfunctions when the blender is attached.
All manuals and user guides at all-guides.com

ENGLISH8
Using the appliance
Smart Process Control
This appliance is equipped with a Smart Process
Control to ensure an optimal process and a
perfect end result. Each process button is linked
to a pre-programmed speed profile representing
the optimal process for a specific accessory.
You can increase or decrease the speed in three
steps by pressing + or - button.
If you press the pulse button, the appliance will
run at the highest speed.When you release the
button, the appliance will stop or return to the
previously selected working speed.
The process can always be stopped with the
Stop-button.
If you press the same process button again within
40 seconds the process starts where it has been
stopped.
Food processing bowl
C1Mount the bowl on the food processor by
turning the handle in the direction of the
arrow until you hear a click.
1
CLICK 2
C2Put the lid on the bowl.Turn the lid in the
direction of the arrow until you hear a
click (this requires some force).
Built-in safety lock
BThe motor unit, the bowl and the lid have been
provided with marks.The appliance will only
function if the mark on the motor unit is directly
opposite the mark on the screw cap.
C1Make sure that the dot on the lid and the
dot on the bowl are directly opposite each
other.The projection of the lid will
complete the shape of the handgrip.
Feed tube and pusher
C1Use the feed tube to add liquid and/or
solid ingredients. Use the pusher to push
solid ingredients through the feed tube.
C2You can also use the pusher to close the
feed tube in order to prevent ingredients
from escaping through the feed tube.
12
CLICK
CLICK
All manuals and user guides at all-guides.com

ENGLISH 9
Metal blade
◗The metal blade can be used for chopping,
mixing, blending and pureeing.
C1Remove the protective cover from the
blade.
The cutting edges of the blade are very sharp
Avoid touching them!
C2Put the tool holder in the bowl and the
blade on the tool holder.
3Put the ingredients in the bowl. Pre-cut
large pieces of food into pieces of approx.
3 x 3 x 3 cm. Put the lid on the bowl.
4Put the pusher in the feed tube.
C5Press the chopping process button on the
control panel.
- The process will start with 4 pulses to ensure
that the ingredients (i.e. onions or nuts) are
chopped regularly.
- Next the process will increase to max. speed
and continue until the STOP button is pressed.
◗Press the - button to decrease the speed.
◗The process can be stopped any time during
the pulses by pressing the STOP button.
Tips
◗If you chop onions, stop the appliance after
the four pulses to prevent them from
becoming too finely chopped.
◗Do not let the appliance run too long when
you are chopping (hard) cheese.The cheese
will become too hot, will start to melt and
will turn lumpy.
◗Do not use the blade to chop very hard
ingredients like coffee beans, turmeric, nutmeg
and ice cubes, as this may cause the blade to
get blunt.
If food sticks to the blade or to the inside of the
bowl:
1Turn the appliance off.
2Remove the lid from the bowl.
3Remove the ingredients from the blade or
from the wall of the bowl with a spatula.
Inserts
Never process hard ingredients like ice cubes
with the inserts.
All manuals and user guides at all-guides.com

ENGLISH10
C1Put the selected insert in the insert holder
before you place it onto the toolholder.
Cutting edges are very sharp. Avoid touching
them!
C2Place the insert holder onto the tool
holder that stands in the bowl.
3Put the lid on the bowl.
4Put the ingredients in the feed tube. Pre-
cut large chunks to make them fit into the
feed tube.
C5Fill the feed tube evenly for the best
results.
When you have to cut large amounts of food,
process only small batches at a time and empty
the bowl regularly between the batches.
C6Select the 'shredding & slicing process' on
the control panel.
The process increases immediately to the defined
processing speed to guarantee the optimal
endresult.
The process speed can be increased up to
3 times pressing the + button and decreased up
to 3 times pressing the - button.
1
2
CLICK
C7Press the pusher lightly onto the
ingredients in the feed tube.
◗If you are shredding soft vegetables or fruits,
you can decrease the speed up to three steps
by pressing the - button to prevent the
shredded vegetables and fruits from turning
into puree.
C8To remove the insert from the insert
holder, take the insert holder in your
hands with its back pointing towards you.
Push the edges of the insert with your
thumbs to make the insert fall out of the
holder.
Adjustable slicing disc
The adjustable slicing disc allows you to cut
ingredients to any thickness you like.
Be careful: the cutting edges of the blade are very
sharp.
C1Insert the blade into the top of the carrier.
All manuals and user guides at all-guides.com

ENGLISH 11
C2Connect the knob from the bottom side
of the disc and turn it until the lines match.
Now the disc is locked.
C3Turn the adjusting knob to adjust the
thickness you prefer.
C4Place the adjustable slicing disc on the tool
holder.
5Close the lid and put the ingredients in the
feed tube.
C6Select the 'shredding & slicing process' on
the control panel.
7Press the ingredients slowly down with the
pusher, if necessary.
Kneading accessory
The kneading accessory can be used for kneading
yeast dough for bread and pizzas.
C1Fit the kneading accessory on the
toolholder.
2
1
C2Put the bowl on the motor unit, turn the
handle in the direction of the arrow and fit
the kneading accessory onto the driving
shaft.
3Put the ingredients in the bowl.
4Close the bowl with the lid.
C5Press the kneading process button on the
Smart Process Control.
The appliance will gradually increase the kneading
speed within 10 seconds to max. speed.The
appliance will continue to run at this speed until
the stop button is pressed.The speed can be
decreased up to 3 times by pressing the - button.
If the +/- button does not react the motor is
already at its physical limits.
Balloon beater
You can use the balloon beater to whisk eggs, egg
whites, instant puddings, cream.
1Put the bowl on the motor unit and turn it
to the left until you hear a 'click'.
C2Put the tool holder in the bowl.
All manuals and user guides at all-guides.com
all-guides.com

ENGLISH12
C3Fit the balloon beater onto the tool
holder.
4Put the ingredients into the bowl, put the
lid on the bowl and turn it to the right
until you hear a click.
C5Press the whisking process button on the
control panel.
The appliance will gradually increase the whisking
speed within 15 seconds to max. speed.The
appliance will continue to run at this speed until
the stop button is pressed.The speed can be
decreased up to 3 times by pressing the - button.
Blender
The blender is intended for:
- Blending fluids, e.g. dairy products, sauces, fruit
juices, soups, mixed drinks, sweat teas, shakes.
- Mixing soft ingredients, e.g. pancake batter or
mayonnaise.
- Pureeing cooked ingredients, e.g. for making
baby food.
◗The appliance can be used with or without
the blender attached to the motor unit. If you
use the appliance without the blender, the
appliance will not function if the screw caphas
not been screwed properly onto the motor
unit.
C1To attach the blender jar, remove the
screw cap above the panel.
C2Mount the blender jar onto the motor unit
by turning it in the direction of the arrow
until it is firmly fixed.The handle must be
facing to the left.
Do not exert too much pressure on the handle
of the blender jar.
3Put the ingredients in the blender jar.
4Close the lid.
C5Always connect the safety cover onto the
blender lid before you start processing.
C6Press the blending process button.The
blender will start to operate, the speed
increases to maximum speed and will
continue to run at this speed until the
STOP button is pressed. During the
blending process the speed can be
decreased up to three times by pressing
the - button.
12
1
2
All manuals and user guides at all-guides.com

13ENGLISH
Tips
C◗Pour the liquid ingredients into the blender
jar through the hole in the lid.
◗The longer you let the appliance run, the finer
the blending result will be.
◗Pre-cut solid ingredients into smaller pieces
before putting them in the blender. If you
want to prepare a large quantity, process small
batches of ingredients instead of trying to
process a large quantity at once.
◗Hard ingredients e.g. soy beans for soy bean
milk, must be soaked in water before they are
processed.
C◗Crush ice cubes by placing the ice cubes in
the jar, close the lid and use the pulse
function.
If ingredients stick to the wall of the blender jar:
1Switch the appliance off and unplug it.
2Open the lid.
Never open the lid while the appliance is still
running.
3Use a spatula to remove the ingredients
from the wall of the jar.
Keep the spatula at a safe distance from the
blades (approx. 2 cm).
◗If you are not satisfied with the results, let the
appliance run briefly a number of times by
pressing the pulse button.You can also achieve
a better result by stirring the ingredients with
a spatula (not while the blender is running), or
by pouring some of the contents out in order
to process a smaller amount.
◗In some cases the ingredients are easier to
blend if you add some liquid e.g. lemon juice
when blending fruits.
Citrus press
The citrus press can be used for all kinds of citrus
fruit.
C1Put the bowl on the motor unit and place
the sieve on the bowl.
C2Turn the sieve in the direction of the
arrow until the peg of the safety lock snaps
home in the motor unit.
C3Place the cone on the sieve by pressing it
lightly down.
C4Press the 'Citrus pressing button' on the
control panel.
The process speed can be increased up to
3 times by pressing the + button.
1
2
CLICK
1
All manuals and user guides at all-guides.com

ENGLISH14
The process starts running and stops if the STOP-
button is pressed.
C5Press half of fruit firmly on the rotating
cone.
Tips
◗Stop pressing from time to time to remove
the pulp from the sieve.
When you do so, switch off the appliance and
remove the bowl along with the sieve and cone.
C◗After use, remove the bowl along with the
Citrus press accessories to prevent juice from
leaking onto the appliance.
Juice extractor
The juice extractor can be used for preparing
fresh fruit and vegetable juices. Pulp, pips and skins
will be separated.
1Put the bowl on the motor unit.
C2Put the toolholder in the bowl.
1
2
C3Attach the juicer drum on the toolholder.
C4Insert the pulp sieve into the juicer drum
and ensure that all 3 pins fit into the
notches of the juicer drum.
C5Put the lid of the juice extractor on the
bowl.
C6Press the juice extracting button.
Never use the juicing accessory if the rotating
sieve or drum is damaged.
The appliance will start with a slow start and
reaches finally maximum speed.The speed can be
decreased by pressing - button.The appliance will
turn off if the STOP button is pressed.
1
2
All manuals and user guides at all-guides.com

ENGLISH 15
C7Drop the fruit or vegetables in the juice
extractor through the feed tube.
C8Press the ingredients firmly down with the
pusher if necessary. Keep the pusher in the
feed tube as much as possible to avoid
splashing.
9Let the appliance run for another
20 seconds to obtain any juice still left in
the fruit or vegetables.
C10 To avoid spilling juice on the appliance,
remove the bowl along with the juice
extractor accessories after use.
Tips
◗Before you use the juice extractor:
- cut carrots, white radish, etc.
- peel citrus fruits, pineapples, melons, etc.
- stone cherries, plums, apricots, peaches, etc.
◗Always switch on the appliance before you
put the fruit in the juice extractor.
◗Switch the appliance off from time to time to
remove pulp from the sieve and the juicer
drum.
◗Do not process large amounts of food at the
same time.
◗Switch the appliance off if it starts to vibrate
strongly and clean the pulp sieve and the filter
before you switch the appliance on again.
1
2
Cleaning
Always unplug the appliance before you start
cleaning the motor unit.
1Clean the motor unit with a damp cloth.
Do not immerse the motor unit in water
and do not rinse it either.
2Always clean the parts that have come
into contact with food in hot water with
washing-up liquid immediately after use.
◗The bowl, the lid of the bowl, the pusher and
the accessories (except for the blender jar)
can also be cleaned in a dishwasher.
These parts have been tested for dishwasher
resistance based on DIN EN 12875.
The blender jar is not dishwasherproof!
◗To remove the lid, open it and then pull it
upwards.
Only remove the lid for cleaning purposes.
Clean the metal blade, the blade unit of the
blender and the inserts very carefully.Their cutting
edges are very sharp!
Make sure that the cutting edges of the blades
and the inserts do not come into contact with
hard objects.This could cause them to become
blunt.
All manuals and user guides at all-guides.com

ENGLISH16
Certain ingredients may cause discolourations on
the surface of the accessories.This does not have
a negative effect on the accessories.The
discolourations usually disappear after some time.
C◗Wind the (excess) mains cord around the
reel on the back of the appliance.
Blender quick-clean operation
C1Pour lukewarm water (not more than
0.5 litres) and some washing-up liquid into
the blender jar.
2Close the lid.
C3Let the appliance run for a few moments
by pressing the pulse button. (The
appliance stops running when you release
the button).
4Detach the blender jar and rinse it with
clean water.
To clean the balloon beater thoroughly:
C1Disassemble the gearwheels from the
balloon beater.
Clean the gearwheels and ballon beater in warm
saopy water or in the dishwasher.
To clean the adjustable slicing disc
thoroughly:
C1Turn the adjusting knob to the right to pull
the blade out of the disc.
The disc, the blade and the adjusting knob can be
cleaned in warm soapy water or in the dish-
washer.
Storage
MicroStore
C◗Put the accessories (blade, insert holder) on
the tool holder and store them in the bowl.
Always end up with the insert holder.
Guarantee & service
If you need information or if you have a problem,
please visit the Philips Web site at
www.philips.com or contact the Philips Customer
Care Centre in your country (you will find its
phone number in the worldwide guarantee
leaflet). If there is no Customer Care Centre in
your country, turn to your local Philips dealer or
contact the Service Department of Philips
Domestic Appliances and Personal Care BV.
1
2
All manuals and user guides at all-guides.com
all-guides.com

ENGLISH 17
Solution
Turn the bowl/or lid clockwise until you hear a click.
Make sure that the points on the bowl and on the lid
are placed directly opposite each other.
The automatic thermal cut-out system has probably cut
off the power supply to the appliance because it has
overheated. 1) Unplug the appliance. 2) Press the STOP
button. 3) Let the appliance cool down for 60 minutes.
4) Put the mains plug in the socket. 5) Switch the
appliance on again.
Press the button for the process you want.
This appliance is equipped with a memory-function. If
you restart the appliance within 40 seconds, the process
will start where it was interrupted. If you want the
process to start right from the beginning: 1) Briefly press
another process (e.g. the pulse button) 2) Then press
the STOP button. 3) Press the appropriate process
button to make the process start all over again.
If both the blender and the food-processing bowl have
been mounted correctly, only the blender will function. If
you want to use the food-processing bowl, detach the
blender and close the fixing hole with the screw cap.
The motor is already at its physical limit, i.e. at kneading
or when the speed is at the defined level where it can
not be decreased any further.
Problem
The appliance doesn't
switch on.
The appliance has
suddenly stopped
running.
You have pressed the
wrong process button.
The process doesn't
start at the beginning
after a restart.
Both the blender jar
and the food
processing bowl are
attached, but only the
blender works.
The +/- button does
not react at certain
applications.
Troubleshooting guide
Application times
10 - 60 sec.
10 - 60 sec.
10 - 60 sec.
60 - 180 sec.
30 - 180 sec.
10 - 60 sec.
depends on the
quantity
depends on the
quantity
Application
Chopping, pureeing, mixing
Shredding, grating
Slicing
Kneading, mixing
Whisking, whipping, emulsifying
Blending, pureeing
Pressing of citrus fruits
Extracting of fruit juices and
vegetable juices
Accessory
P
hjk
¬
{
˚
D
ƒ
©
Function
¥
^
^
¨
∆
†
“
‘
Functions, appliacations & application times
All manuals and user guides at all-guides.com

ENGLISH18
Applications
Salads, raw
vegetables
Salads, raw
vegetables
Pancakes,
waffles
Breadcrumbed
dishes, au
gratin dishes
Deserts,
toppings
Procedure
Cut the vegetables into pieces
that fit into the tube. Fill the
tube with the pieces and slice
them while pressing the pusher
lightly.
Cut the vegetables into pieces
that fit into the tube. Fill the
tube with the pieces and slice
them while pressing the pusher
lightly.
First pour the milk into the
blender and then add the dry
ingredients. Mix the ingredients
for approx. 1 minute. If
necessary, repeat this
procedure 2 times.Then stop
for a few minutes to allow the
appliance to cool down to
ambient temperature.
Use dry, crispy bread.
Use soft butter for a light
result.
Proce
ss
butto
n /
access
ory
^/ k
^/ ¬
†/ D
¥/ P
¨/ {
Max.
quanti
ty
500g
500g
750ml
milk
100g
300g
Ingredients &
results
Apples,
carrots,
celeriac -
shredding
Apples,
carrots,
celeriac -
slicing
Batter
(pancake) -
whisking
Bread crumbs
- chopping
Butter cream
(creme au
beurre) -
whisking
Quantities and preparation times Applications
Garnishing,
soups, sauces,
au gratin
dishes
Sauces, pizzas,
au gratin
dishes, fondues
Garnishing,
sauces, pastry,
puddings,
mousses
Purees, soups
Baby and
infant food
Salads,
garnishing
Bread
Procedure
Use a piece of rindless
Parmesan and cut it into pieces
of approx. 3 x 3 cm.
Cut the cheese into pieces that
fit into the tube. Press carefully
with the pusher.
Use hard, plain chocolate. Break
it into pieces of 2 cm.
Use cooked peas or beans. If
necessary, add some liquid to
improve the consistency of the
mixture.
For a coarse puree, add only a
little liquid. For a fine puree,
keep adding liquid until the
mixture is smooth.
Put the cucumber in the tube
and press it down carefully.
Mix warm water with yeast and
sugar. Add flour, oil and salt and
knead the dough for approx.
90 seconds. Leave to rise for
30 minutes.
Proce
ss
butto
n /
access
ory
¥/ P
^/ h
¥/ P
¥/ P
¥/ P
^/ ¬
¨/ {
Max.
quanti
ty
200g
200g
200g
250g
500g
2
cucum
bers
500g
flour
Ingredients &
results
Cheese
(Parmesan) -
chopping
Cheese
(Gouda) -
shredding
Chocolate -
chopping
Cooked peas,
beans -
pureeing
Cooked
vegetables and
meats -
pureeing
Cucumbers -
slicing
Dough (for
bread) -
kneading
All manuals and user guides at all-guides.com

1919ENGLISH
Applications
Pizza
Apple pies,
sweet biscuits,
open fruit flans
Luxury bread
Puddings,
soufflees,
meringues
Procedure
Follow the same procedure as
for bread dough. Knead the
dough for 1 minute. First put in
the flour and then the other
ingredients.
Use cold margarine, cut the
margarine into 2cm cubes. Put
the flour in the bowl and add
the margarine. Mix until the
dough has become crumbly.
Then add cold water while
mixing. Stop as soon as the
dough starts to turn into a ball.
Allow the dough to cool
before further processing.
First mix yeast, warm water
and some sugar in a separate
bowl. Put all ingredients in the
bowl and knead the dough
until it is smooth and does not
stick to the bowl (takes approx.
1 minute). Leave it to rise for
30 minutes.
Use egg whites at room
temperature. Note: use at least
2 egg whites.
Proce
ss
butto
n /
access
ory
¨/ {
¨/ {
¨/ {
∆/ ˚
Max.
quanti
ty
750g
flour
300g
flour
500g
flour
4 egg
whites
Ingredients &
results
Dough (for
pizzas) -
kneading
Dough
(shortcrust
pastry) -
kneading
Dough (yeast)
- kneading
Egg whites -
whisking
Applications
Sauces, jams,
puddings, baby
food
Sauces, jams,
puddings, baby
food
Garnishing,
dips
Sauces, soups,
garnishing,
herb butter
Fruit juices
Salads,
garnishing and
barbecue
sauces
Procedure
Tip: add a little lemon juice to
prevent the fruit from
discolouring. Add some liquid
to obtain a smooth puree.
Tip: add a little lemon juice to
prevent the fruit from
discolouring
Peel the garlic. Press the pulse
button several times to avoid
chopping the garlic too fine.
Use at least 150g.
Wash and dry the herbs before
chopping.
Juice the fruits in the juicer.
All the ingredients must be at
room temperature. Note: use
at least one large egg, two small
eggs or two egg yolks. Put the
egg and a little vinegar in the
bowl and add the oil drop by
drop.
Proce
ss
butto
n /
access
ory
†/ D
¥/ P
¥/ P
¥/ P
‘/ ©
∆/ ˚
Max.
quanti
ty
500g
500g
300g
Min.
50g
500g
(total
amou
nt)
3 eggs
Ingredients &
results
Fruit (e.g.
apples,
bananas, water
chestnut) -
blending
Fruit (e.g.
apples,
bananas) -
chopping
Garlic -
chopping
Herbs (e.g.
parsley) -
chopping
Juices (e.g.
made of apple,
carrots etc.)
juicing) -
blending
Mayonnaise -
emulsifying
All manuals and user guides at all-guides.com

ENGLISH20
Applications
Steaks tartar,
hamburgers,
meat balls
Steaks tartar,
hamburgers,
meat balls
Milkshakes
Various cakes.
Salads,
puddings, nut
bread, almond
paste
Salad, cooked
food, stir-fries,
garnishing
Procedure
First remove any sinews or
bones. Cut the meat into cubes
of 3cm. Press the pulse button
to get a coarser chopping
result.
First remove any sinews or
bones. Cut the meat into cubes
of 3cm. Press the pulse button
to get a coarser chopping
result.
Puree the fruit (e.g. bananas,
strawberries) with sugar, milk
and some ice cream and mix
well.
The ingredients must be at
room temperature. Mix the
softened butter and the sugar
until the mixture is smooth and
creamy.Then add milk, eggs and
flour.
Use the pulse button for
coarse chopping. Stop the
process if you want a coarse
result.
Peel the onions and cut them
into 4 pieces. Stop the process
after 2 pulses to check the
result.
Proce
ss
butto
n /
access
ory
¥/ P
¥/ P
†/ D
¨/ {
¥/ P
¥/ P
Max.
quanti
ty
500g
400g
500ml
milk
4 eggs
250g
500g
Ingredients &
results
Meats (lean) -
mincing
Meats, fish,
poultry
(streaky) -
mincing
Milkshakes -
blending
Mixture (cake)
- mixing
Nuts -
chopping
Onions -
chopping
Applications
Salad, cooked
food, stir-fries,
garnishing
Minced meat
Soups, sauces
Garnishing,
cream, ice-
cream
mixtures
Procedure
Peel the onions and cut them
into pieces that fit into the
tube. Note: use at least 100g.
First remove any sinews or
bones. Cut the meat into cubes
of 3cm. Use the pulse button
for a coarser chopping result.
Use cooked vegetables.
Use cream that comes straight
from the refrigerator. Note: use
at least 125ml cream.The
whipped cream is ready after
approx. 20 seconds.
Proce
ss
butto
n /
access
ory
^/ ¬
¥/ P
†/ D
∆/ ˚
Max.
quanti
ty
300g
200g
500ml
500ml
Ingredients &
results
Onions -
slicing
Poultry -
mincing
Soups -
blending
Whipping
cream -
whipping
All manuals and user guides at all-guides.com